[Tue Feb 28 07:11:43 2012] Detection parameters:
  Position = (1333.5, 755.9) = 6 31 51.95 4 19 12.8
  Extent = 0.5" x 0.5", rotation angle = 10 degrees
  Source counts = 18.6 +/- 4.4
  Background counts = 0.4
  Rate = 0.0008 +/- 0.0002

[Tue Feb 28 07:11:44 2012] Off-axis axis estimate = 0.54'
[Tue Feb 28 07:31:13 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Tue Feb 28 07:31:13 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Tue Feb 28 07:31:13 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.896
[Tue Feb 28 07:31:13 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 0.39"
[Tue Feb 28 07:47:16 2012] fullrun_ccd2_acisf12387_pi14-548_cl_pass0_src4.ximg exists
[Tue Feb 28 07:47:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12387_pi14-548_cl_pass0_src4.csv
[Tue Feb 28 07:47:16 2012] fullrun_ccd2_acisf12387_pi14-548_cl_pass0_src4_1.ximg exists
[Tue Feb 28 07:47:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12387_pi14-548_cl_pass0_src4.csv
[Tue Feb 28 07:47:16 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12387_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12387_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 07:47:16 2012] fullrun_ccd2_acisf12387_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Tue Feb 28 07:47:16 2012] fullrun_ccd2_acisf12387_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Feb 28 07:47:16 2012] Fit fullrun_ccd2_acisf12387_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Feb 28 08:01:44 2012] Spatial fit model total counts = 18.358400, observed total counts = 20.000000
[Tue Feb 28 08:01:44 2012] Offset between fit and detection position for source 2 = 0.607365 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.607365 pixels
  Position = (1333.9, 756.3) = 6 31 51.96 4 19 12.7
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 18.7 +/- 4.3
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Tue Feb 28 08:01:44 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 08:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 08:01:44 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 08:01:44 2012] Source does appear to be extended
[Tue Feb 28 08:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 08:20:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 28 08:20:36 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Tue Feb 28 08:20:36 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.922
[Tue Feb 28 08:20:36 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 0.38"
[Tue Feb 28 08:34:34 2012] fullrun_ccd2_acisf12387_pi14-548_cl_pass1_src4.ximg exists
[Tue Feb 28 08:34:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12387_pi14-548_cl_pass1_src4.csv
[Tue Feb 28 08:34:34 2012] fullrun_ccd2_acisf12387_pi14-548_cl_pass1_src4_1.ximg exists
[Tue Feb 28 08:34:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12387_pi14-548_cl_pass1_src4.csv
[Tue Feb 28 08:34:34 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12387_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12387_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 08:34:34 2012] fullrun_ccd2_acisf12387_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Tue Feb 28 08:34:34 2012] fullrun_ccd2_acisf12387_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Feb 28 08:34:34 2012] Fit fullrun_ccd2_acisf12387_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Tue Feb 28 08:46:35 2012] Spatial fit model total counts = 18.611400, observed total counts = 20.000000
[Tue Feb 28 08:46:35 2012] Offset between fit and detection position for source 2 = 0.064844 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.064844 pixels
  Position = (1333.9, 756.3) = 6 31 51.96 4 19 12.7
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 18.8 +/- 4.3
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Tue Feb 28 08:46:35 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 08:46:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 08:46:35 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 08:46:35 2012] Source does appear to be extended
[Tue Feb 28 08:46:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 08:59:00 2012] Writing source region out to fullrun_ccd2_acisf12387_pi14-548_pass1_cl_src2_src.reg
[Tue Feb 28 08:59:00 2012] Extracting stamp from image fullrun_ccd2_acisf12387_pi14-548_cl_sm2.00.img.gz, (1316, 738) - (1352, 774)
[Tue Feb 28 08:59:00 2012] Writing fullrun_ccd2_acisf12387_pi14-548_pass1_cl_src2.gif
[Tue Feb 28 09:01:00 2012] Size of ../../acisf12387/products/events/fullrun_ccd2_acisf12387_pi14-548_pass1_cl_src2_src.evt.gz[events] = 19 counts
[Tue Feb 28 09:01:00 2012] Mean chipx,y = (108.47, 989.26)
[Tue Feb 28 09:01:00 2012] Mean tdetx,y = (4050.26, 3977.53)
[Tue Feb 28 09:01:00 2012] chipx,y range = (92.00-123.00, 974.00-1007.00)
[Tue Feb 28 09:01:00 2012] Size of ../../acisf12387/products/events/fullrun_ccd2_acisf12387_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 3 counts
[Tue Feb 28 09:01:01 2012] Not generating rmf since there are only 18 counts
[Tue Feb 28 09:01:01 2012] arf not found, will run specextract
[Tue Feb 28 09:01:37 2012] ../../acisf12387/products/spectra/fullrun_ccd2_acisf12387_pi14-548_pass1_cl_src2.warf not found
[Tue Feb 28 09:01:37 2012] ../../acisf12387/products/spectra/fullrun_ccd2_acisf12387_pi14-548_pass1_cl_src2.wrmf not found
[Tue Feb 28 09:01:37 2012] Removal of ../../acisf12387/products/spectra/fullrun_ccd2_acisf12387_pi14-548_pass1_cl_src2.soff failed
[Tue Feb 28 09:08:20 2012] Spectrum 2 has only 19 counts, deleting rmf
[Tue Feb 28 09:08:20 2012] 201.398
[Tue Feb 28 09:19:35 2012] Updating aperture counts using extracted products
[Tue Feb 28 09:19:35 2012] Error reading totcts from fullrun_ccd2_acisf12387_pi14-548_pass1_cl_src2_src.pi.gz
[Tue Feb 28 09:19:36 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 28 09:19:36 2012] Using photon index=1.80, rate=0.000761, arf fullrun_ccd2_acisf12387_pi14-548_pass1_cl_src2.arf
[Tue Feb 28 09:19:36 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 28 09:19:36 2012] Updating source flux to 9.8e-15
[Tue Feb 28 09:19:40 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Feb 28 09:19:41 2012] acisf12387/analysis//spectral/fullrun_ccd2_acisf12387_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete