[Tue Feb 28 07:11:43 2012] Detection parameters:
  Position = (1054.5, 641.9) = 6 32 1.13 4 18 16.7
  Extent = 0.5" x 0.5", rotation angle = 39 degrees
  Source counts = 26.6 +/- 5.2
  Background counts = 0.4
  Rate = 0.001 +/- 0.0002

[Tue Feb 28 07:11:44 2012] Off-axis axis estimate = 3.00'
[Tue Feb 28 07:31:13 2012] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Tue Feb 28 07:31:13 2012] Initial guess for spatial extent in simple fitting = 0.58"
[Tue Feb 28 07:31:13 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.064
[Tue Feb 28 07:31:13 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 0.58"
[Tue Feb 28 07:47:16 2012] fullrun_ccd2_acisf12387_pi14-548_cl_pass0_src3.ximg exists
[Tue Feb 28 07:47:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12387_pi14-548_cl_pass0_src3.csv
[Tue Feb 28 07:47:16 2012] fullrun_ccd2_acisf12387_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Feb 28 07:47:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12387_pi14-548_cl_pass0_src3.csv
[Tue Feb 28 07:47:16 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12387_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12387_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 07:47:16 2012] fullrun_ccd2_acisf12387_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Feb 28 07:47:16 2012] fullrun_ccd2_acisf12387_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Feb 28 07:47:16 2012] Fit fullrun_ccd2_acisf12387_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Feb 28 08:01:44 2012] Spatial fit model total counts = 26.835800, observed total counts = 27.000000
[Tue Feb 28 08:01:44 2012] Offset between fit and detection position for source 1 = 0.655014 pixels
[Tue Feb 28 08:01:44 2012] 26.835600 total counts/ 0.000000 bgd. counts: snr = 341667146608156.875000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.655014 pixels
  Position = (1055.0, 642.3) = 6 32 1.13 4 18 16.6
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 26.8 +/- 5.2
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Tue Feb 28 08:01:44 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 08:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 08:01:44 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 08:01:44 2012] Source does appear to be extended
[Tue Feb 28 08:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 08:20:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 28 08:20:36 2012] Initial guess for spatial extent in simple fitting = 0.60"
[Tue Feb 28 08:20:36 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.011
[Tue Feb 28 08:20:36 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 0.60"
[Tue Feb 28 08:34:34 2012] fullrun_ccd2_acisf12387_pi14-548_cl_pass1_src3.ximg exists
[Tue Feb 28 08:34:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12387_pi14-548_cl_pass1_src3.csv
[Tue Feb 28 08:34:34 2012] fullrun_ccd2_acisf12387_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Feb 28 08:34:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12387_pi14-548_cl_pass1_src3.csv
[Tue Feb 28 08:34:34 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12387_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12387_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 08:34:34 2012] fullrun_ccd2_acisf12387_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Feb 28 08:34:34 2012] fullrun_ccd2_acisf12387_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Feb 28 08:34:34 2012] Fit fullrun_ccd2_acisf12387_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Feb 28 08:46:35 2012] Spatial fit model total counts = 27.353000, observed total counts = 28.000000
[Tue Feb 28 08:46:35 2012] Offset between fit and detection position for source 1 = 0.033444 pixels
[Tue Feb 28 08:46:35 2012] 27.835300 total counts/ 0.000000 bgd. counts: snr = 292367927490740.625000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.033444 pixels
  Position = (1055.0, 642.3) = 6 32 1.13 4 18 16.6
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 27.8 +/- 5.3
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Tue Feb 28 08:46:35 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 08:46:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 08:46:35 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 08:46:35 2012] Source does appear to be extended
[Tue Feb 28 08:46:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 08:59:00 2012] Writing source region out to fullrun_ccd2_acisf12387_pi14-548_pass1_cl_src1_src.reg
[Tue Feb 28 08:59:00 2012] Extracting stamp from image fullrun_ccd2_acisf12387_pi14-548_cl_sm2.00.img.gz, (1027, 615) - (1083, 670)
[Tue Feb 28 08:59:00 2012] Writing fullrun_ccd2_acisf12387_pi14-548_pass1_cl_src1.gif
[Tue Feb 28 09:00:24 2012] Size of ../../acisf12387/products/events/fullrun_ccd2_acisf12387_pi14-548_pass1_cl_src1_src.evt.gz[events] = 27 counts
[Tue Feb 28 09:00:24 2012] Mean chipx,y = (213.63, 711.11)
[Tue Feb 28 09:00:24 2012] Mean tdetx,y = (3772.11, 3872.37)
[Tue Feb 28 09:00:24 2012] chipx,y range = (198.00-231.00, 691.00-726.00)
[Tue Feb 28 09:00:24 2012] Size of ../../acisf12387/products/events/fullrun_ccd2_acisf12387_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 7 counts
[Tue Feb 28 09:00:25 2012] Not generating rmf since there are only 27 counts
[Tue Feb 28 09:00:25 2012] arf not found, will run specextract
[Tue Feb 28 09:00:52 2012] ../../acisf12387/products/spectra/fullrun_ccd2_acisf12387_pi14-548_pass1_cl_src1.warf not found
[Tue Feb 28 09:00:52 2012] ../../acisf12387/products/spectra/fullrun_ccd2_acisf12387_pi14-548_pass1_cl_src1.wrmf not found
[Tue Feb 28 09:00:52 2012] Removal of ../../acisf12387/products/spectra/fullrun_ccd2_acisf12387_pi14-548_pass1_cl_src1.soff failed
[Tue Feb 28 09:08:20 2012] Spectrum 1 has only 28 counts, deleting rmf
[Tue Feb 28 09:08:20 2012] 188.709
[Tue Feb 28 09:19:35 2012] Updating aperture counts using extracted products
[Tue Feb 28 09:19:35 2012] Error reading totcts from fullrun_ccd2_acisf12387_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Feb 28 09:19:36 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 28 09:19:36 2012] Using photon index=1.80, rate=0.00113, arf fullrun_ccd2_acisf12387_pi14-548_pass1_cl_src1.arf
[Tue Feb 28 09:19:36 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 28 09:19:36 2012] Updating source flux to 1.5e-14
[Tue Feb 28 09:19:40 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Feb 28 09:19:41 2012] acisf12387/analysis//spectral/fullrun_ccd2_acisf12387_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete