[Tue Feb 14 01:46:32 2012] Detection parameters:
  Position = (884.8, 154.4) = 6 35 4.34 3 42 42.9
  Extent = 0.5" x 0.5", rotation angle = 72 degrees
  Source counts = 11.3 +/- 3.5
  Background counts = 0.7
  Rate = 0.0003 +/- 0.0001

[Tue Feb 14 01:46:32 2012] Off-axis axis estimate = 1.86'
[Tue Feb 14 02:15:41 2012] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 02:15:41 2012] Initial guess for spatial extent in simple fitting = 0.42"
[Tue Feb 14 02:15:41 2012] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.240
[Tue Feb 14 02:15:41 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 0.42"
[Tue Feb 14 02:23:30 2012] fullrun_ccd3_acisf12386_pi14-548_cl_pass0_src6.ximg exists
[Tue Feb 14 02:23:30 2012] fullrun_ccd3_acisf12386_pi14-548_cl_pass0_src6_1.ximg exists
[Tue Feb 14 02:23:30 2012] Fit fullrun_ccd3_acisf12386_pi14-548_cl_pass0_src6 appears to have run properly
[Tue Feb 14 02:23:30 2012] fullrun_ccd3_acisf12386_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Tue Feb 14 02:23:30 2012] fullrun_ccd3_acisf12386_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Feb 14 02:23:30 2012] Fit fullrun_ccd3_acisf12386_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Tue Feb 14 02:23:36 2012] Spatial fit model total counts = 13.691400, observed total counts = 14.000000
[Tue Feb 14 02:23:36 2012] Offset between fit and detection position for source 19 = 0.748787 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.748787 pixels
  Position = (885.4, 154.9) = 6 35 4.34 3 42 42.9
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 13.0 +/- 3.6
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Tue Feb 14 02:23:36 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 02:23:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 02:23:36 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 02:23:36 2012] Source does appear to be extended
[Tue Feb 14 02:23:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 02:49:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 14 02:49:11 2012] Initial guess for spatial extent in simple fitting = 0.42"
[Tue Feb 14 02:49:11 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.820
[Tue Feb 14 02:49:11 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 0.42"
[Tue Feb 14 02:56:15 2012] fullrun_ccd3_acisf12386_pi14-548_cl_pass1_src5.ximg exists
[Tue Feb 14 02:56:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12386_pi14-548_cl_pass1_src5.csv
[Tue Feb 14 02:56:15 2012] fullrun_ccd3_acisf12386_pi14-548_cl_pass1_src5_1.ximg exists
[Tue Feb 14 02:56:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12386_pi14-548_cl_pass1_src5.csv
[Tue Feb 14 02:56:15 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12386_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12386_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 02:56:15 2012] fullrun_ccd3_acisf12386_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Tue Feb 14 02:56:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12386_pi14-548_cl_pass1_tfrozen_src5.csv
[Tue Feb 14 02:56:15 2012] fullrun_ccd3_acisf12386_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Feb 14 02:56:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12386_pi14-548_cl_pass1_tfrozen_src5.csv
[Tue Feb 14 02:56:15 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12386_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12386_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 02:56:22 2012] Spatial fit model total counts = 12.832800, observed total counts = 14.000000
[Tue Feb 14 02:56:22 2012] Offset between fit and detection position for source 19 = 0.014292 pixels
[Tue Feb 14 02:56:22 2012] 12.188800 total counts/ 0.000000 bgd. counts: snr = 41394356317566.250000
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.014292 pixels
  Position = (885.4, 154.9) = 6 35 4.34 3 42 42.9
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 12.2 +/- 3.5
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Tue Feb 14 02:56:22 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 02:56:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 02:56:22 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 02:56:22 2012] Source does appear to be extended
[Tue Feb 14 02:56:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 03:16:29 2012] Writing source region out to fullrun_ccd3_acisf12386_pi14-548_pass1_cl_src19_src.reg
[Tue Feb 14 03:16:29 2012] Extracting stamp from image fullrun_ccd3_acisf12386_pi14-548_cl_sm2.00.img.gz, (866, 136) - (905, 174)
[Tue Feb 14 03:16:29 2012] Writing fullrun_ccd3_acisf12386_pi14-548_pass1_cl_src19.gif
[Tue Feb 14 03:19:25 2012] Size of ../../acisf12386/products/events/fullrun_ccd3_acisf12386_pi14-548_pass1_cl_src19_src.evt.gz[events] = 12 counts
[Tue Feb 14 03:19:25 2012] Mean chipx,y = (1011.58, 823.33)
[Tue Feb 14 03:19:25 2012] Mean tdetx,y = (4308.67, 4072.58)
[Tue Feb 14 03:19:25 2012] chipx,y range = (1001.00-1023.00, 806.00-839.00)
[Tue Feb 14 03:19:25 2012] Size of ../../acisf12386/products/events/fullrun_ccd3_acisf12386_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 6 counts
[Tue Feb 14 03:19:26 2012] Not generating rmf since there are only 12 counts
[Tue Feb 14 03:19:26 2012] arf not found, will run specextract
[Tue Feb 14 03:19:53 2012] ../../acisf12386/products/spectra/fullrun_ccd3_acisf12386_pi14-548_pass1_cl_src19.warf not found
[Tue Feb 14 03:19:53 2012] ../../acisf12386/products/spectra/fullrun_ccd3_acisf12386_pi14-548_pass1_cl_src19.wrmf not found
[Tue Feb 14 03:19:53 2012] Removal of ../../acisf12386/products/spectra/fullrun_ccd3_acisf12386_pi14-548_pass1_cl_src19.soff failed
[Tue Feb 14 03:26:57 2012] Spectrum 19 has only 12 counts, deleting rmf
[Tue Feb 14 03:26:57 2012] 127.428
[Tue Feb 14 03:27:18 2012] Updating aperture counts using extracted products
[Tue Feb 14 03:27:18 2012] Error reading totcts from fullrun_ccd3_acisf12386_pi14-548_pass1_cl_src19_src.pi.gz
[Tue Feb 14 03:27:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 03:27:18 2012] Using photon index=1.80, rate=0.000352, arf fullrun_ccd3_acisf12386_pi14-548_pass1_cl_src19.arf
[Tue Feb 14 03:27:18 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 14 03:27:18 2012] Updating source flux to 7.2e-15
[Tue Feb 14 03:27:26 2012] Source 19 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Feb 14 03:27:27 2012] acisf12386/analysis//spectral/fullrun_ccd3_acisf12386_pi14-548_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete