[Fri Jul 20 13:43:54 2012] Detection parameters:
  Position = (910.3, 166.3) = 17 19 48.87 -36 7 56.3
  Extent = 0.5" x 0.5", rotation angle = 177 degrees
  Source counts = 24.5 +/- 5.0
  Background counts = 0.5
  Rate = 0.0008 +/- 0.0002

[Fri Jul 20 13:43:55 2012] Off-axis axis estimate = 1.04'
[Fri Jul 20 15:02:38 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 15:02:38 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Jul 20 15:02:38 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.390
[Fri Jul 20 15:02:38 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 0.38"
[Fri Jul 20 16:15:10 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass0_src25.ximg exists
[Fri Jul 20 16:15:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12382_pi14-548_cl_pass0_src25.csv
[Fri Jul 20 16:15:10 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass0_src25_1.ximg exists
[Fri Jul 20 16:15:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12382_pi14-548_cl_pass0_src25.csv
[Fri Jul 20 16:15:10 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12382_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12382_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 16:15:11 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Fri Jul 20 16:15:11 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Jul 20 16:15:11 2012] Fit fullrun_ccd3_acisf12382_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Jul 20 16:31:56 2012] Spatial fit model total counts = 25.792100, observed total counts = 26.000000
[Fri Jul 20 16:31:56 2012] Offset between fit and detection position for source 52 = 0.715615 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.715615 pixels
  Position = (910.8, 166.8) = 17 19 48.86 -36 7 56.3
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 25.6 +/- 5.1
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Fri Jul 20 16:31:56 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 16:31:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 16:31:56 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 16:31:56 2012] Source does appear to be extended
[Fri Jul 20 16:31:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 17:47:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 17:47:55 2012] Initial guess for spatial extent in simple fitting = 0.41"
[Fri Jul 20 17:47:55 2012] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.267
[Fri Jul 20 17:47:55 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 0.41"
[Fri Jul 20 18:51:43 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass1_src24.ximg exists
[Fri Jul 20 18:51:43 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass1_src24_1.ximg exists
[Fri Jul 20 18:51:43 2012] Fit fullrun_ccd3_acisf12382_pi14-548_cl_pass1_src24 appears to have run properly
[Fri Jul 20 18:51:44 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass1_tfrozen_src24.ximg exists
[Fri Jul 20 18:51:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12382_pi14-548_cl_pass1_tfrozen_src24.csv
[Fri Jul 20 18:51:44 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass1_tfrozen_src24_1.ximg exists
[Fri Jul 20 18:51:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12382_pi14-548_cl_pass1_tfrozen_src24.csv
[Fri Jul 20 18:51:44 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12382_pi14-548_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12382_pi14-548_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 19:10:43 2012] Spatial fit model total counts = 23.907700, observed total counts = 26.000000
[Fri Jul 20 19:10:43 2012] Offset between fit and detection position for source 52 = 0.053747 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.053747 pixels
  Position = (910.8, 166.8) = 17 19 48.87 -36 7 56.3
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 24.3 +/- 4.9
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Fri Jul 20 19:10:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 19:10:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 19:10:43 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 19:10:43 2012] Source does appear to be extended
[Fri Jul 20 19:10:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 20:02:46 2012] Writing source region out to fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src52_src.reg
[Fri Jul 20 20:02:46 2012] Extracting stamp from image fullrun_ccd3_acisf12382_pi14-548_cl_sm2.00.img.gz, (891, 147) - (931, 187)
[Fri Jul 20 20:02:46 2012] Writing fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src52.gif
[Fri Jul 20 20:15:21 2012] Size of ../../acisf12382/products/events/fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src52_src.evt.gz[events] = 25 counts
[Fri Jul 20 20:15:21 2012] Mean chipx,y = (914.24, 896.44)
[Fri Jul 20 20:15:21 2012] Mean tdetx,y = (4235.56, 3975.24)
[Fri Jul 20 20:15:21 2012] chipx,y range = (896.00-930.00, 876.00-909.00)
[Fri Jul 20 20:15:21 2012] Size of ../../acisf12382/products/events/fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src52_bgd.evt.gz[events] = 4 counts
[Fri Jul 20 20:15:23 2012] Not generating rmf since there are only 24 counts
[Fri Jul 20 20:15:23 2012] arf not found, will run specextract
[Fri Jul 20 20:15:56 2012] ../../acisf12382/products/spectra/fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src52.warf not found
[Fri Jul 20 20:15:56 2012] ../../acisf12382/products/spectra/fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src52.wrmf not found
[Fri Jul 20 20:15:56 2012] Removal of ../../acisf12382/products/spectra/fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src52.soff failed
[Fri Jul 20 20:45:56 2012] Spectrum 52 has only 24 counts, deleting rmf
[Fri Jul 20 20:45:56 2012] 201.32
[Fri Jul 20 20:46:39 2012] Updating aperture counts using extracted products
[Fri Jul 20 20:46:39 2012] Error reading totcts from fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src52_src.pi.gz
[Fri Jul 20 20:46:39 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 20:46:39 2012] Using photon index=1.80, rate=0.00076, arf fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src52.arf
[Fri Jul 20 20:46:39 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jul 20 20:46:39 2012] Updating source flux to 1.2e-14
[Fri Jul 20 20:46:50 2012] Source 52 has fewer than 100.000000 counts, skipping spectral fitting