[Fri Jul 20 13:43:54 2012] Detection parameters:
  Position = (988.9, 527.7) = 17 19 45.67 -36 4 58.4
  Extent = 0.5" x 0.5", rotation angle = 24 degrees
  Source counts = 12.3 +/- 3.6
  Background counts = 0.7
  Rate = 0.0004 +/- 0.0001

[Fri Jul 20 13:43:55 2012] Off-axis axis estimate = 4.04'
[Fri Jul 20 15:02:38 2012] Using EEF radius (= 0.84 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 15:02:38 2012] Initial guess for spatial extent in simple fitting = 0.84"
[Fri Jul 20 15:02:38 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.818
[Fri Jul 20 15:02:38 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 0.84"
[Fri Jul 20 16:15:10 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass0_src47.ximg exists
[Fri Jul 20 16:15:10 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass0_src47_1.ximg exists
[Fri Jul 20 16:15:10 2012] Fit fullrun_ccd3_acisf12382_pi14-548_cl_pass0_src47 appears to have run properly
[Fri Jul 20 16:15:11 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass0_tfrozen_src47.ximg exists
[Fri Jul 20 16:15:11 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass0_tfrozen_src47_1.ximg exists
[Fri Jul 20 16:15:11 2012] Fit fullrun_ccd3_acisf12382_pi14-548_cl_pass0_tfrozen_src47 appears to have run properly
[Fri Jul 20 16:31:56 2012] Spatial fit model total counts = 12.143900, observed total counts = 13.000000
[Fri Jul 20 16:31:56 2012] Offset between fit and detection position for source 36 = 0.592830 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.592830 pixels
  Position = (989.3, 528.2) = 17 19 45.68 -36 4 58.5
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 12.1 +/- 3.5
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Fri Jul 20 16:31:56 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 16:31:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 16:31:56 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 16:31:56 2012] Source does appear to be extended
[Fri Jul 20 16:31:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 17:47:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 17:47:55 2012] Initial guess for spatial extent in simple fitting = 0.46"
[Fri Jul 20 17:47:55 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.097
[Fri Jul 20 17:47:55 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 0.46"
[Fri Jul 20 18:51:44 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass1_src45.ximg exists
[Fri Jul 20 18:51:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12382_pi14-548_cl_pass1_src45.csv
[Fri Jul 20 18:51:44 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass1_src45_1.ximg exists
[Fri Jul 20 18:51:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12382_pi14-548_cl_pass1_src45.csv
[Fri Jul 20 18:51:44 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12382_pi14-548_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12382_pi14-548_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 18:51:44 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass1_tfrozen_src45.ximg exists
[Fri Jul 20 18:51:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12382_pi14-548_cl_pass1_tfrozen_src45.csv
[Fri Jul 20 18:51:44 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass1_tfrozen_src45_1.ximg exists
[Fri Jul 20 18:51:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12382_pi14-548_cl_pass1_tfrozen_src45.csv
[Fri Jul 20 18:51:44 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12382_pi14-548_cl_pass1_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12382_pi14-548_cl_pass1_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 19:10:43 2012] Spatial fit model total counts = 12.856800, observed total counts = 14.000000
[Fri Jul 20 19:10:43 2012] Offset between fit and detection position for source 36 = 0.100465 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.100465 pixels
  Position = (989.4, 528.2) = 17 19 45.68 -36 4 58.4
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 12.9 +/- 3.6
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Fri Jul 20 19:10:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 19:10:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 19:10:43 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 19:10:43 2012] Source does appear to be extended
[Fri Jul 20 19:10:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 20:02:46 2012] Writing source region out to fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src36_src.reg
[Fri Jul 20 20:02:46 2012] Extracting stamp from image fullrun_ccd3_acisf12382_pi14-548_cl_sm2.00.img.gz, (969, 508) - (1010, 549)
[Fri Jul 20 20:02:46 2012] Writing fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src36.gif
[Fri Jul 20 20:27:54 2012] Size of ../../acisf12382/products/events/fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src36_src.evt.gz[events] = 13 counts
[Fri Jul 20 20:27:54 2012] Mean chipx,y = (872.85, 521.00)
[Fri Jul 20 20:27:54 2012] Mean tdetx,y = (4611.00, 3933.85)
[Fri Jul 20 20:27:54 2012] chipx,y range = (859.00-886.00, 508.00-539.00)
[Fri Jul 20 20:27:54 2012] Size of ../../acisf12382/products/events/fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src36_bgd.evt.gz[events] = 5 counts
[Fri Jul 20 20:27:56 2012] Not generating rmf since there are only 12 counts
[Fri Jul 20 20:27:56 2012] arf not found, will run specextract
[Fri Jul 20 20:28:25 2012] ../../acisf12382/products/spectra/fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src36.warf not found
[Fri Jul 20 20:28:25 2012] ../../acisf12382/products/spectra/fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src36.wrmf not found
[Fri Jul 20 20:28:25 2012] Removal of ../../acisf12382/products/spectra/fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src36.soff failed
[Fri Jul 20 20:45:56 2012] Spectrum 36 has only 13 counts, deleting rmf
[Fri Jul 20 20:45:56 2012] 192.652
[Fri Jul 20 20:46:39 2012] Updating aperture counts using extracted products
[Fri Jul 20 20:46:39 2012] Error reading totcts from fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src36_src.pi.gz
[Fri Jul 20 20:46:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 20:46:40 2012] Using photon index=1.80, rate=0.000403, arf fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src36.arf
[Fri Jul 20 20:46:40 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jul 20 20:46:40 2012] Updating source flux to 6.5e-15
[Fri Jul 20 20:46:50 2012] Source 36 has fewer than 100.000000 counts, skipping spectral fitting