[Fri Jul 20 13:43:54 2012] Detection parameters:
  Position = (994.2, 508.5) = 17 19 45.46 -36 5 7.9
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 11.9 +/- 3.6
  Background counts = 1.1
  Rate = 0.0004 +/- 0.0001

[Fri Jul 20 13:43:55 2012] Off-axis axis estimate = 3.89'
[Fri Jul 20 15:02:38 2012] Using EEF radius (= 0.80 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 15:02:38 2012] Initial guess for spatial extent in simple fitting = 0.80"
[Fri Jul 20 15:02:38 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.112
[Fri Jul 20 15:02:38 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 0.80"
[Fri Jul 20 16:15:10 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass0_src50.ximg exists
[Fri Jul 20 16:15:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12382_pi14-548_cl_pass0_src50.csv
[Fri Jul 20 16:15:10 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass0_src50_1.ximg exists
[Fri Jul 20 16:15:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12382_pi14-548_cl_pass0_src50.csv
[Fri Jul 20 16:15:10 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12382_pi14-548_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12382_pi14-548_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 16:15:11 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass0_tfrozen_src50.ximg exists
[Fri Jul 20 16:15:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12382_pi14-548_cl_pass0_tfrozen_src50.csv
[Fri Jul 20 16:15:11 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass0_tfrozen_src50_1.ximg exists
[Fri Jul 20 16:15:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12382_pi14-548_cl_pass0_tfrozen_src50.csv
[Fri Jul 20 16:15:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12382_pi14-548_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12382_pi14-548_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 16:31:56 2012] Spatial fit model total counts = 12.667700, observed total counts = 14.000000
[Fri Jul 20 16:31:56 2012] Offset between fit and detection position for source 35 = 0.766361 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.766361 pixels
  Position = (994.8, 509.0) = 17 19 45.46 -36 5 7.9
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 12.3 +/- 3.5
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Fri Jul 20 16:31:56 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 16:31:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 16:31:56 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 16:31:56 2012] Source does appear to be extended
[Fri Jul 20 16:31:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 17:47:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 17:47:55 2012] Initial guess for spatial extent in simple fitting = 0.62"
[Fri Jul 20 17:47:55 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.278
[Fri Jul 20 17:47:55 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 0.62"
[Fri Jul 20 18:51:44 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass1_src48.ximg exists
[Fri Jul 20 18:51:44 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass1_src48_1.ximg exists
[Fri Jul 20 18:51:44 2012] Fit fullrun_ccd3_acisf12382_pi14-548_cl_pass1_src48 appears to have run properly
[Fri Jul 20 18:51:44 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass1_tfrozen_src48.ximg exists
[Fri Jul 20 18:51:44 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass1_tfrozen_src48_1.ximg exists
[Fri Jul 20 18:51:44 2012] Fit fullrun_ccd3_acisf12382_pi14-548_cl_pass1_tfrozen_src48 appears to have run properly
[Fri Jul 20 19:10:43 2012] Spatial fit model total counts = 13.228100, observed total counts = 14.000000
[Fri Jul 20 19:10:43 2012] Offset between fit and detection position for source 35 = 0.041575 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.041575 pixels
  Position = (994.7, 509.0) = 17 19 45.46 -36 5 7.9
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 12.8 +/- 3.6
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Fri Jul 20 19:10:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 19:10:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 19:10:43 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 19:10:43 2012] Source does appear to be extended
[Fri Jul 20 19:10:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 20:02:46 2012] Writing source region out to fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src35_src.reg
[Fri Jul 20 20:02:46 2012] Extracting stamp from image fullrun_ccd3_acisf12382_pi14-548_cl_sm2.00.img.gz, (967, 481) - (1022, 537)
[Fri Jul 20 20:02:46 2012] Writing fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src35.gif
[Fri Jul 20 20:29:41 2012] Size of ../../acisf12382/products/events/fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src35_src.evt.gz[events] = 13 counts
[Fri Jul 20 20:29:41 2012] Mean chipx,y = (885.08, 538.38)
[Fri Jul 20 20:29:41 2012] Mean tdetx,y = (4593.62, 3946.08)
[Fri Jul 20 20:29:41 2012] chipx,y range = (870.00-902.00, 522.00-556.00)
[Fri Jul 20 20:29:41 2012] Size of ../../acisf12382/products/events/fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src35_bgd.evt.gz[events] = 7 counts
[Fri Jul 20 20:29:42 2012] Not generating rmf since there are only 12 counts
[Fri Jul 20 20:29:42 2012] arf not found, will run specextract
[Fri Jul 20 20:30:06 2012] ../../acisf12382/products/spectra/fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src35.warf not found
[Fri Jul 20 20:30:06 2012] ../../acisf12382/products/spectra/fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src35.wrmf not found
[Fri Jul 20 20:30:06 2012] Removal of ../../acisf12382/products/spectra/fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src35.soff failed
[Fri Jul 20 20:45:56 2012] Spectrum 35 has only 13 counts, deleting rmf
[Fri Jul 20 20:45:56 2012] 193.257
[Fri Jul 20 20:46:39 2012] Updating aperture counts using extracted products
[Fri Jul 20 20:46:39 2012] Error reading totcts from fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src35_src.pi.gz
[Fri Jul 20 20:46:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 20:46:40 2012] Using photon index=1.80, rate=0.0004, arf fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src35.arf
[Fri Jul 20 20:46:40 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jul 20 20:46:40 2012] Updating source flux to 6.4e-15
[Fri Jul 20 20:46:50 2012] Source 35 has fewer than 100.000000 counts, skipping spectral fitting