[Fri Jul 20 13:43:54 2012] Detection parameters:
  Position = (842.5, 345.0) = 17 19 51.62 -36 6 28.3
  Extent = 0.5" x 0.5", rotation angle = 118 degrees
  Source counts = 12.4 +/- 3.6
  Background counts = 0.6
  Rate = 0.0004 +/- 0.0001

[Fri Jul 20 13:43:55 2012] Off-axis axis estimate = 2.58'
[Fri Jul 20 15:02:38 2012] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 15:02:38 2012] Initial guess for spatial extent in simple fitting = 0.50"
[Fri Jul 20 15:02:38 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.966
[Fri Jul 20 15:02:38 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 0.50"
[Fri Jul 20 16:15:10 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass0_src46.ximg exists
[Fri Jul 20 16:15:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12382_pi14-548_cl_pass0_src46.csv
[Fri Jul 20 16:15:10 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass0_src46_1.ximg exists
[Fri Jul 20 16:15:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12382_pi14-548_cl_pass0_src46.csv
[Fri Jul 20 16:15:10 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12382_pi14-548_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12382_pi14-548_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 16:15:11 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass0_tfrozen_src46.ximg exists
[Fri Jul 20 16:15:11 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass0_tfrozen_src46_1.ximg exists
[Fri Jul 20 16:15:11 2012] Fit fullrun_ccd3_acisf12382_pi14-548_cl_pass0_tfrozen_src46 appears to have run properly
[Fri Jul 20 16:31:56 2012] Spatial fit model total counts = 12.905500, observed total counts = 13.000000
[Fri Jul 20 16:31:56 2012] Offset between fit and detection position for source 27 = 0.695550 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.695550 pixels
  Position = (842.9, 345.6) = 17 19 51.62 -36 6 28.3
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 12.9 +/- 3.6
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Fri Jul 20 16:31:56 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 16:31:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 16:31:56 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 16:31:56 2012] Source does appear to be extended
[Fri Jul 20 16:31:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 17:47:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 17:47:55 2012] Initial guess for spatial extent in simple fitting = 0.54"
[Fri Jul 20 17:47:55 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.175
[Fri Jul 20 17:47:55 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 0.54"
[Fri Jul 20 18:51:44 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass1_src44.ximg exists
[Fri Jul 20 18:51:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12382_pi14-548_cl_pass1_src44.csv
[Fri Jul 20 18:51:44 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass1_src44_1.ximg exists
[Fri Jul 20 18:51:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12382_pi14-548_cl_pass1_src44.csv
[Fri Jul 20 18:51:44 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12382_pi14-548_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12382_pi14-548_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 18:51:44 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass1_tfrozen_src44.ximg exists
[Fri Jul 20 18:51:44 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass1_tfrozen_src44_1.ximg exists
[Fri Jul 20 18:51:44 2012] Fit fullrun_ccd3_acisf12382_pi14-548_cl_pass1_tfrozen_src44 appears to have run properly
[Fri Jul 20 19:10:43 2012] Spatial fit model total counts = 13.382900, observed total counts = 13.000000
[Fri Jul 20 19:10:43 2012] Offset between fit and detection position for source 27 = 0.104457 pixels
[Fri Jul 20 19:10:43 2012] 13.382800 total counts/ 0.000000 bgd. counts: snr = 75678520115.393921
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.104457 pixels
  Position = (843.0, 345.5) = 17 19 51.62 -36 6 28.3
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 13.4 +/- 3.7
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Fri Jul 20 19:10:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 19:10:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 19:10:43 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 19:10:43 2012] Source does appear to be extended
[Fri Jul 20 19:10:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 20:02:46 2012] Writing source region out to fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src27_src.reg
[Fri Jul 20 20:02:46 2012] Extracting stamp from image fullrun_ccd3_acisf12382_pi14-548_cl_sm2.00.img.gz, (820, 322) - (866, 369)
[Fri Jul 20 20:02:46 2012] Writing fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src27.gif
[Fri Jul 20 20:27:13 2012] Size of ../../acisf12382/products/events/fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src27_src.evt.gz[events] = 13 counts
[Fri Jul 20 20:27:13 2012] Mean chipx,y = (794.31, 743.00)
[Fri Jul 20 20:27:13 2012] Mean tdetx,y = (4389.00, 3855.31)
[Fri Jul 20 20:27:13 2012] chipx,y range = (777.00-808.00, 725.00-761.00)
[Fri Jul 20 20:27:13 2012] Size of ../../acisf12382/products/events/fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 5 counts
[Fri Jul 20 20:27:15 2012] Not generating rmf since there are only 13 counts
[Fri Jul 20 20:27:15 2012] arf not found, will run specextract
[Fri Jul 20 20:27:46 2012] ../../acisf12382/products/spectra/fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src27.warf not found
[Fri Jul 20 20:27:46 2012] ../../acisf12382/products/spectra/fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src27.wrmf not found
[Fri Jul 20 20:27:46 2012] Removal of ../../acisf12382/products/spectra/fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src27.soff failed
[Fri Jul 20 20:45:56 2012] Spectrum 27 has only 13 counts, deleting rmf
[Fri Jul 20 20:45:56 2012] 197.33
[Fri Jul 20 20:46:39 2012] Updating aperture counts using extracted products
[Fri Jul 20 20:46:39 2012] Error reading totcts from fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src27_src.pi.gz
[Fri Jul 20 20:46:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 20:46:40 2012] Using photon index=1.80, rate=0.000418, arf fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src27.arf
[Fri Jul 20 20:46:40 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jul 20 20:46:40 2012] Updating source flux to 6.6e-15
[Fri Jul 20 20:46:50 2012] Source 27 has fewer than 100.000000 counts, skipping spectral fitting