[Fri Jul 20 13:43:54 2012] Detection parameters:
  Position = (643.0, 287.4) = 17 19 59.72 -36 6 56.7
  Extent = 0.5" x 0.5", rotation angle = 43 degrees
  Source counts = 19.1 +/- 4.5
  Background counts = 0.9
  Rate = 0.0006 +/- 0.0001

[Fri Jul 20 13:43:55 2012] Off-axis axis estimate = 3.05'
[Fri Jul 20 15:02:38 2012] Using EEF radius (= 0.59 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 15:02:38 2012] Initial guess for spatial extent in simple fitting = 0.59"
[Fri Jul 20 15:02:38 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.041
[Fri Jul 20 15:02:38 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 0.59"
[Fri Jul 20 16:15:10 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass0_src30.ximg exists
[Fri Jul 20 16:15:10 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass0_src30_1.ximg exists
[Fri Jul 20 16:15:10 2012] Fit fullrun_ccd3_acisf12382_pi14-548_cl_pass0_src30 appears to have run properly
[Fri Jul 20 16:15:11 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Fri Jul 20 16:15:11 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Fri Jul 20 16:15:11 2012] Fit fullrun_ccd3_acisf12382_pi14-548_cl_pass0_tfrozen_src30 appears to have run properly
[Fri Jul 20 16:31:56 2012] Spatial fit model total counts = 20.315700, observed total counts = 22.000000
[Fri Jul 20 16:31:56 2012] Offset between fit and detection position for source 25 = 0.970768 pixels
[Fri Jul 20 16:31:56 2012] 19.298490 total counts/ 1.196590 bgd. counts: snr = 16.548227
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.970768 pixels
  Position = (643.6, 288.1) = 17 19 59.71 -36 6 56.5
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 18.1 +/- 4.4
  Background counts = 1.2
  Rate = 0.0006 +/- 0.0001
[Fri Jul 20 16:31:56 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 16:31:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 16:31:56 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 16:31:56 2012] Source does appear to be extended
[Fri Jul 20 16:31:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 17:47:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 17:47:55 2012] Initial guess for spatial extent in simple fitting = 0.48"
[Fri Jul 20 17:47:55 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.024
[Fri Jul 20 17:47:55 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 0.48"
[Fri Jul 20 18:51:43 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass1_src29.ximg exists
[Fri Jul 20 18:51:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12382_pi14-548_cl_pass1_src29.csv
[Fri Jul 20 18:51:43 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass1_src29_1.ximg exists
[Fri Jul 20 18:51:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12382_pi14-548_cl_pass1_src29.csv
[Fri Jul 20 18:51:43 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12382_pi14-548_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12382_pi14-548_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 18:51:44 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass1_tfrozen_src29.ximg exists
[Fri Jul 20 18:51:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12382_pi14-548_cl_pass1_tfrozen_src29.csv
[Fri Jul 20 18:51:44 2012] fullrun_ccd3_acisf12382_pi14-548_cl_pass1_tfrozen_src29_1.ximg exists
[Fri Jul 20 18:51:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12382_pi14-548_cl_pass1_tfrozen_src29.csv
[Fri Jul 20 18:51:44 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12382_pi14-548_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12382_pi14-548_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 19:10:43 2012] Spatial fit model total counts = 19.363300, observed total counts = 22.000000
[Fri Jul 20 19:10:43 2012] Offset between fit and detection position for source 25 = 0.007370 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.007370 pixels
  Position = (643.6, 288.1) = 17 19 59.71 -36 6 56.5
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 18.1 +/- 4.3
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Fri Jul 20 19:10:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 19:10:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 19:10:43 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 19:10:43 2012] Source does appear to be extended
[Fri Jul 20 19:10:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 20:02:46 2012] Writing source region out to fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src25_src.reg
[Fri Jul 20 20:02:46 2012] Extracting stamp from image fullrun_ccd3_acisf12382_pi14-548_cl_sm2.00.img.gz, (622, 266) - (666, 310)
[Fri Jul 20 20:02:46 2012] Writing fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src25.gif
[Fri Jul 20 20:18:16 2012] Size of ../../acisf12382/products/events/fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src25_src.evt.gz[events] = 19 counts
[Fri Jul 20 20:18:16 2012] Mean chipx,y = (616.05, 857.74)
[Fri Jul 20 20:18:16 2012] Mean tdetx,y = (4274.26, 3677.05)
[Fri Jul 20 20:18:16 2012] chipx,y range = (601.00-637.00, 843.00-877.00)
[Fri Jul 20 20:18:16 2012] Size of ../../acisf12382/products/events/fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src25_bgd.evt.gz[events] = 4 counts
[Fri Jul 20 20:18:17 2012] Not generating rmf since there are only 18 counts
[Fri Jul 20 20:18:17 2012] arf not found, will run specextract
[Fri Jul 20 20:18:44 2012] ../../acisf12382/products/spectra/fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src25.warf not found
[Fri Jul 20 20:18:44 2012] ../../acisf12382/products/spectra/fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src25.wrmf not found
[Fri Jul 20 20:18:44 2012] Removal of ../../acisf12382/products/spectra/fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src25.soff failed
[Fri Jul 20 20:45:56 2012] Spectrum 25 has only 18 counts, deleting rmf
[Fri Jul 20 20:45:56 2012] 191.493
[Fri Jul 20 20:46:39 2012] Updating aperture counts using extracted products
[Fri Jul 20 20:46:39 2012] Error reading totcts from fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src25_src.pi.gz
[Fri Jul 20 20:46:39 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 20:46:39 2012] Using photon index=1.80, rate=0.000566, arf fullrun_ccd3_acisf12382_pi14-548_pass1_cl_src25.arf
[Fri Jul 20 20:46:39 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jul 20 20:46:39 2012] Updating source flux to 9.3e-15
[Fri Jul 20 20:46:50 2012] Source 25 has fewer than 100.000000 counts, skipping spectral fitting