[Fri Jul 20 13:43:20 2012] Detection parameters:
  Position = (1187.2, 917.0) = 17 19 50.13 -36 9 50.1
  Extent = 0.5" x 0.5", rotation angle = 77 degrees
  Source counts = 31.2 +/- 5.7
  Background counts = 0.8
  Rate = 0.001 +/- 0.0002

[Fri Jul 20 13:43:20 2012] Off-axis axis estimate = 0.92'
[Fri Jul 20 14:39:17 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 14:39:17 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Jul 20 14:39:17 2012] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.617
[Fri Jul 20 14:39:17 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 0.38"
[Fri Jul 20 15:02:37 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass0_src4.ximg exists
[Fri Jul 20 15:02:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12382_pi14-548_cl_pass0_src4.csv
[Fri Jul 20 15:02:37 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass0_src4_1.ximg exists
[Fri Jul 20 15:02:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12382_pi14-548_cl_pass0_src4.csv
[Fri Jul 20 15:02:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12382_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12382_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 15:02:37 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Fri Jul 20 15:02:37 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jul 20 15:02:37 2012] Fit fullrun_ccd2_acisf12382_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Jul 20 16:31:48 2012] Spatial fit model total counts = 42.000000, observed total counts = 42.000000
[Fri Jul 20 16:31:48 2012] Offset between fit and detection position for source 6 = 0.642891 pixels
[Fri Jul 20 16:31:48 2012] 41.384000 total counts/ 12.648200 bgd. counts: snr = 8.079955
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.642891 pixels
  Position = (1187.7, 917.4) = 17 19 50.13 -36 9 50.1
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 28.7 +/- 6.4
  Background counts = 12.6
  Rate = 0.0009 +/- 0.0002
[Fri Jul 20 16:31:48 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 16:31:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 16:31:48 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 16:31:48 2012] Source does appear to be extended
[Fri Jul 20 16:31:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 17:24:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 17:24:40 2012] Initial guess for spatial extent in simple fitting = 0.45"
[Fri Jul 20 17:24:40 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.120
[Fri Jul 20 17:24:40 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 0.45"
[Fri Jul 20 17:47:54 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass1_src4.ximg exists
[Fri Jul 20 17:47:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12382_pi14-548_cl_pass1_src4.csv
[Fri Jul 20 17:47:54 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass1_src4_1.ximg exists
[Fri Jul 20 17:47:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12382_pi14-548_cl_pass1_src4.csv
[Fri Jul 20 17:47:54 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12382_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12382_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 17:47:55 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Fri Jul 20 17:47:55 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jul 20 17:47:55 2012] Fit fullrun_ccd2_acisf12382_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Jul 20 19:10:37 2012] Spatial fit model total counts = 42.000000, observed total counts = 42.000000
[Fri Jul 20 19:10:37 2012] Offset between fit and detection position for source 6 = 0.000010 pixels
[Fri Jul 20 19:10:37 2012] 41.383900 total counts/ 12.648000 bgd. counts: snr = 8.080047
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.000010 pixels
  Position = (1187.7, 917.4) = 17 19 50.13 -36 9 50.1
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 28.7 +/- 6.4
  Background counts = 12.6
  Rate = 0.0009 +/- 0.0002
[Fri Jul 20 19:10:37 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 19:10:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 19:10:37 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 19:10:37 2012] Source does appear to be extended
[Fri Jul 20 19:10:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 19:47:32 2012] Writing source region out to fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src6_src.reg
[Fri Jul 20 19:47:32 2012] Extracting stamp from image fullrun_ccd2_acisf12382_pi14-548_cl_sm2.00.img.gz, (1167, 897) - (1208, 938)
[Fri Jul 20 19:47:32 2012] Writing fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src6.gif
[Fri Jul 20 19:49:10 2012] Size of ../../acisf12382/products/events/fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src6_src.evt.gz[events] = 31 counts
[Fri Jul 20 19:49:10 2012] Mean chipx,y = (67.23, 949.97)
[Fri Jul 20 19:49:10 2012] Mean tdetx,y = (4010.97, 4018.77)
[Fri Jul 20 19:49:10 2012] chipx,y range = (52.00-86.00, 933.00-968.00)
[Fri Jul 20 19:49:10 2012] Size of ../../acisf12382/products/events/fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 20 counts
[Fri Jul 20 19:49:12 2012] Not generating rmf since there are only 28 counts
[Fri Jul 20 19:49:12 2012] arf not found, will run specextract
[Fri Jul 20 19:49:40 2012] ../../acisf12382/products/spectra/fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src6.warf not found
[Fri Jul 20 19:49:40 2012] ../../acisf12382/products/spectra/fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src6.wrmf not found
[Fri Jul 20 19:49:40 2012] Removal of ../../acisf12382/products/spectra/fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src6.soff failed
[Fri Jul 20 20:02:45 2012] Spectrum 6 has only 29 counts, deleting rmf
[Fri Jul 20 20:02:45 2012] 201.686
[Fri Jul 20 20:46:38 2012] Updating aperture counts using extracted products
[Fri Jul 20 20:46:38 2012] Error reading totcts from fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src6_src.pi.gz
[Fri Jul 20 20:46:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 20:46:38 2012] Using photon index=1.80, rate=0.000897, arf fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src6.arf
[Fri Jul 20 20:46:38 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jul 20 20:46:38 2012] Updating source flux to 1.4e-14
[Fri Jul 20 20:46:49 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jul 20 20:46:50 2012] acisf12382/analysis//spectral/fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete