[Fri Jul 20 13:43:20 2012] Detection parameters:
  Position = (673.4, 410.9) = 17 20 11.02 -36 13 58.9
  Extent = 2.0" x 1.0", rotation angle = 124 degrees
  Source counts = 13.5 +/- 4.0
  Background counts = 2.5
  Rate = 0.0004 +/- 0.0001

[Fri Jul 20 13:43:20 2012] Off-axis axis estimate = 6.77'
[Fri Jul 20 14:39:17 2012] Using EEF radius (= 2.04 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 14:39:17 2012] Initial guess for spatial extent in simple fitting = 2.04"
[Fri Jul 20 14:39:17 2012] source mask rpix=4.2, npix_max = 86, mask sum = 90, frac = 1.040
[Fri Jul 20 14:39:17 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 2.04"
[Fri Jul 20 15:02:37 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass0_src15.ximg exists
[Fri Jul 20 15:02:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12382_pi14-548_cl_pass0_src15.csv
[Fri Jul 20 15:02:37 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass0_src15_1.ximg exists
[Fri Jul 20 15:02:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12382_pi14-548_cl_pass0_src15.csv
[Fri Jul 20 15:02:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12382_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12382_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 15:02:38 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Fri Jul 20 15:02:38 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Jul 20 15:02:38 2012] Fit fullrun_ccd2_acisf12382_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Jul 20 16:31:48 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 22.221026 pixels away
[Fri Jul 20 16:31:48 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 16:31:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 16:31:48 2012] Assessing source extent using major
[Fri Jul 20 16:31:48 2012] Source does appear to be extended
[Fri Jul 20 16:31:48 2012] Computing asymmetry using major and minor axis, asym = 1.99
[Fri Jul 20 16:31:48 2012] Source is asymmetric
[Fri Jul 20 17:24:40 2012] Using EEF radius (= 2.04 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 17:24:40 2012] Initial guess for spatial extent in simple fitting = 2.04"
[Fri Jul 20 17:24:40 2012] source mask rpix=4.2, npix_max = 86, mask sum = 90, frac = 1.040
[Fri Jul 20 17:24:40 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 2.04"
[Fri Jul 20 17:47:55 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass1_src15.ximg exists
[Fri Jul 20 17:47:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12382_pi14-548_cl_pass1_src15.csv
[Fri Jul 20 17:47:55 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass1_src15_1.ximg exists
[Fri Jul 20 17:47:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12382_pi14-548_cl_pass1_src15.csv
[Fri Jul 20 17:47:55 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12382_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12382_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 17:47:55 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Fri Jul 20 17:47:55 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Fri Jul 20 17:47:55 2012] Fit fullrun_ccd2_acisf12382_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Fri Jul 20 19:10:37 2012] Spatial fit model total counts = 13.991100, observed total counts = 18.000000
[Fri Jul 20 19:10:37 2012] Offset between fit and detection position for source 27 = 4.586627 pixels
[Fri Jul 20 19:10:37 2012] 14.162210 total counts/ 4.673010 bgd. counts: snr = 4.389664
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 4.586627 pixels
  Position = (671.9, 415.3) = 17 20 11.10 -36 13 57.0
  Extent = 1.5 (1.3-3.0)" x 0.6 (0.4-1.1)", rotation angle = 41 (23-54) degrees
  Source counts = 9.5 +/- 3.8
  Background counts = 4.7
  Rate = 0.0003 +/- 0.0001
[Fri Jul 20 19:10:37 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 19:10:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 19:10:37 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 19:10:37 2012] Source does appear to be extended
[Fri Jul 20 19:10:37 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.16
[Fri Jul 20 19:47:32 2012] Writing source region out to fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src27_src.reg
[Fri Jul 20 19:47:32 2012] Extracting stamp from image fullrun_ccd2_acisf12382_pi14-548_cl_sm2.00.img.gz, (603, 347) - (740, 484)
[Fri Jul 20 19:47:32 2012] Writing fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src27.gif
[Fri Jul 20 19:55:28 2012] Size of ../../acisf12382/products/events/fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src27_src.evt.gz[events] = 9 counts
[Fri Jul 20 19:55:28 2012] Mean chipx,y = (400.00, 309.00)
[Fri Jul 20 19:55:28 2012] Mean tdetx,y = (3370.00, 3686.00)
[Fri Jul 20 19:55:28 2012] chipx,y range = (384.00-415.00, 294.00-334.00)
[Fri Jul 20 19:55:28 2012] Size of ../../acisf12382/products/events/fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 35 counts
[Fri Jul 20 19:55:29 2012] Not generating rmf since there are only 9 counts
[Fri Jul 20 19:55:29 2012] arf not found, will run specextract
[Fri Jul 20 19:55:52 2012] ../../acisf12382/products/spectra/fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src27.warf not found
[Fri Jul 20 19:55:52 2012] ../../acisf12382/products/spectra/fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src27.wrmf not found
[Fri Jul 20 19:55:52 2012] Removal of ../../acisf12382/products/spectra/fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src27.soff failed
[Fri Jul 20 20:02:45 2012] Spectrum 27 has only 9 counts, deleting rmf
[Fri Jul 20 20:02:45 2012] 173.007
[Fri Jul 20 20:46:38 2012] Updating aperture counts using extracted products
[Fri Jul 20 20:46:38 2012] Error reading totcts from fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src27_src.pi.gz
[Fri Jul 20 20:46:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 20:46:38 2012] Using photon index=1.80, rate=0.000296, arf fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src27.arf
[Fri Jul 20 20:46:38 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jul 20 20:46:38 2012] Updating source flux to 5.3e-15
[Fri Jul 20 20:46:49 2012] Source 27 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jul 20 20:46:50 2012] acisf12382/analysis//spectral/fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete