[Fri Jul 20 13:43:20 2012] Detection parameters:
  Position = (941.2, 1005.6) = 17 20 0.12 -36 9 6.4
  Extent = 0.6" x 0.5", rotation angle = 77 degrees
  Source counts = 11.4 +/- 3.5
  Background counts = 0.6
  Rate = 0.0004 +/- 0.0001

[Fri Jul 20 13:43:20 2012] Off-axis axis estimate = 2.36'
[Fri Jul 20 14:39:17 2012] Using EEF radius (= 0.47 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 14:39:17 2012] Initial guess for spatial extent in simple fitting = 0.47"
[Fri Jul 20 14:39:17 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.057
[Fri Jul 20 14:39:17 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 0.47"
[Fri Jul 20 15:02:37 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass0_src17.ximg exists
[Fri Jul 20 15:02:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12382_pi14-548_cl_pass0_src17.csv
[Fri Jul 20 15:02:37 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass0_src17_1.ximg exists
[Fri Jul 20 15:02:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12382_pi14-548_cl_pass0_src17.csv
[Fri Jul 20 15:02:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12382_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12382_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 15:02:38 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Fri Jul 20 15:02:38 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Jul 20 15:02:38 2012] Fit fullrun_ccd2_acisf12382_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Jul 20 16:31:48 2012] Spatial fit model total counts = 13.178900, observed total counts = 14.000000
[Fri Jul 20 16:31:48 2012] Offset between fit and detection position for source 10 = 0.996249 pixels
[Fri Jul 20 16:31:48 2012] 12.984820 total counts/ 2.849920 bgd. counts: snr = 6.003481
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.996249 pixels
  Position = (941.8, 1006.4) = 17 20 0.11 -36 9 6.3
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 10.1 +/- 3.6
  Background counts = 2.8
  Rate = 0.0003 +/- 0.0001
[Fri Jul 20 16:31:48 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 16:31:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 16:31:48 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 16:31:48 2012] Source does appear to be extended
[Fri Jul 20 16:31:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 17:24:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 17:24:40 2012] Initial guess for spatial extent in simple fitting = 0.55"
[Fri Jul 20 17:24:40 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.870
[Fri Jul 20 17:24:40 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 0.55"
[Fri Jul 20 17:47:55 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass1_src17.ximg exists
[Fri Jul 20 17:47:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12382_pi14-548_cl_pass1_src17.csv
[Fri Jul 20 17:47:55 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass1_src17_1.ximg exists
[Fri Jul 20 17:47:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12382_pi14-548_cl_pass1_src17.csv
[Fri Jul 20 17:47:55 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12382_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12382_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 17:47:55 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Fri Jul 20 17:47:55 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Jul 20 17:47:55 2012] Fit fullrun_ccd2_acisf12382_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Jul 20 19:10:37 2012] Spatial fit model total counts = 14.936400, observed total counts = 15.000000
[Fri Jul 20 19:10:37 2012] Offset between fit and detection position for source 10 = 0.139466 pixels
[Fri Jul 20 19:10:37 2012] 14.521980 total counts/ 4.047380 bgd. counts: snr = 5.206555
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.139466 pixels
  Position = (941.9, 1006.5) = 17 20 0.11 -36 9 6.2
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 10.5 +/- 3.8
  Background counts = 4.0
  Rate = 0.0003 +/- 0.0001
[Fri Jul 20 19:10:37 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 19:10:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 19:10:37 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 19:10:37 2012] Source does appear to be extended
[Fri Jul 20 19:10:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 19:47:32 2012] Writing source region out to fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src10_src.reg
[Fri Jul 20 19:47:32 2012] Extracting stamp from image fullrun_ccd2_acisf12382_pi14-548_cl_sm2.00.img.gz, (918, 983) - (966, 1030)
[Fri Jul 20 19:47:32 2012] Writing fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src10.gif
[Fri Jul 20 19:56:34 2012] Size of ../../acisf12382/products/events/fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src10_src.evt.gz[events] = 11 counts
[Fri Jul 20 19:56:34 2012] Mean chipx,y = (336.09, 958.73)
[Fri Jul 20 19:56:34 2012] Mean tdetx,y = (4019.73, 3749.91)
[Fri Jul 20 19:56:34 2012] chipx,y range = (316.00-347.00, 942.00-971.00)
[Fri Jul 20 19:56:34 2012] Size of ../../acisf12382/products/events/fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 5 counts
[Fri Jul 20 19:56:35 2012] Not generating rmf since there are only 10 counts
[Fri Jul 20 19:56:35 2012] arf not found, will run specextract
[Fri Jul 20 19:57:06 2012] ../../acisf12382/products/spectra/fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src10.warf not found
[Fri Jul 20 19:57:06 2012] ../../acisf12382/products/spectra/fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src10.wrmf not found
[Fri Jul 20 19:57:06 2012] Removal of ../../acisf12382/products/spectra/fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src10.soff failed
[Fri Jul 20 20:02:45 2012] Spectrum 10 has only 10 counts, deleting rmf
[Fri Jul 20 20:02:45 2012] 194.005
[Fri Jul 20 20:46:38 2012] Updating aperture counts using extracted products
[Fri Jul 20 20:46:38 2012] Error reading totcts from fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src10_src.pi.gz
[Fri Jul 20 20:46:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 20:46:38 2012] Using photon index=1.80, rate=0.000327, arf fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src10.arf
[Fri Jul 20 20:46:38 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jul 20 20:46:38 2012] Updating source flux to 5.3e-15
[Fri Jul 20 20:46:49 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jul 20 20:46:50 2012] acisf12382/analysis//spectral/fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete