[Fri Jul 20 13:43:20 2012] Detection parameters:
  Position = (963.3, 520.9) = 17 19 59.23 -36 13 4.9
  Extent = 1.3" x 0.5", rotation angle = 85 degrees
  Source counts = 44.8 +/- 6.9
  Background counts = 2.2
  Rate = 0.001 +/- 0.0002

[Fri Jul 20 13:43:20 2012] Off-axis axis estimate = 4.65'
[Fri Jul 20 14:39:17 2012] Using EEF radius (= 1.05 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 14:39:17 2012] Initial guess for spatial extent in simple fitting = 1.05"
[Fri Jul 20 14:39:17 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.089
[Fri Jul 20 14:39:17 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 1.05"
[Fri Jul 20 15:02:37 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass0_src3.ximg exists
[Fri Jul 20 15:02:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12382_pi14-548_cl_pass0_src3.csv
[Fri Jul 20 15:02:37 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Jul 20 15:02:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12382_pi14-548_cl_pass0_src3.csv
[Fri Jul 20 15:02:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12382_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12382_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 15:02:37 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Jul 20 15:02:37 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jul 20 15:02:37 2012] Fit fullrun_ccd2_acisf12382_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jul 20 16:31:48 2012] Spatial fit model total counts = 52.293200, observed total counts = 53.000000
[Fri Jul 20 16:31:48 2012] Offset between fit and detection position for source 1 = 0.928273 pixels
[Fri Jul 20 16:31:48 2012] 53.421000 total counts/ 6.231000 bgd. counts: snr = 18.904757
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.928273 pixels
  Position = (964.2, 521.1) = 17 19 59.22 -36 13 5.0
  Extent = 1.2 (0.8-1.5)", rotation angle = 0
  Source counts = 47.2 +/- 7.3
  Background counts = 6.2
  Rate = 0.001 +/- 0.0002
[Fri Jul 20 16:31:48 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 16:31:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 16:31:48 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 16:31:48 2012] Source does appear to be extended
[Fri Jul 20 16:31:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 17:24:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 17:24:40 2012] Initial guess for spatial extent in simple fitting = 1.18"
[Fri Jul 20 17:24:40 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.071
[Fri Jul 20 17:24:40 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 1.18"
[Fri Jul 20 17:47:54 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass1_src3.ximg exists
[Fri Jul 20 17:47:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12382_pi14-548_cl_pass1_src3.csv
[Fri Jul 20 17:47:54 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Jul 20 17:47:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12382_pi14-548_cl_pass1_src3.csv
[Fri Jul 20 17:47:54 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12382_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12382_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 17:47:55 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Jul 20 17:47:55 2012] fullrun_ccd2_acisf12382_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jul 20 17:47:55 2012] Fit fullrun_ccd2_acisf12382_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jul 20 19:10:37 2012] Spatial fit model total counts = 52.624400, observed total counts = 53.000000
[Fri Jul 20 19:10:37 2012] Offset between fit and detection position for source 1 = 0.269906 pixels
[Fri Jul 20 19:10:37 2012] 53.667070 total counts/ 9.691070 bgd. counts: snr = 14.126347
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.269906 pixels
  Position = (964.1, 521.4) = 17 19 59.22 -36 13 4.9
  Extent = 1.1 (0.8-1.5)", rotation angle = 0
  Source counts = 44.0 +/- 7.3
  Background counts = 9.7
  Rate = 0.001 +/- 0.0002
[Fri Jul 20 19:10:37 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 19:10:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 19:10:37 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 19:10:37 2012] Source does appear to be extended
[Fri Jul 20 19:10:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 19:47:32 2012] Writing source region out to fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src1_src.reg
[Fri Jul 20 19:47:32 2012] Extracting stamp from image fullrun_ccd2_acisf12382_pi14-548_cl_sm2.00.img.gz, (915, 472) - (1013, 570)
[Fri Jul 20 19:47:32 2012] Writing fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src1.gif
[Fri Jul 20 19:48:37 2012] Size of ../../acisf12382/products/events/fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src1_src.evt.gz[events] = 53 counts
[Fri Jul 20 19:48:37 2012] Mean chipx,y = (154.79, 499.32)
[Fri Jul 20 19:48:37 2012] Mean tdetx,y = (3560.32, 3931.21)
[Fri Jul 20 19:48:37 2012] chipx,y range = (140.00-179.00, 481.00-522.00)
[Fri Jul 20 19:48:37 2012] Size of ../../acisf12382/products/events/fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 27 counts
[Fri Jul 20 19:48:38 2012] Not generating rmf since there are only 43 counts
[Fri Jul 20 19:48:38 2012] arf not found, will run specextract
[Fri Jul 20 19:49:03 2012] ../../acisf12382/products/spectra/fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src1.warf not found
[Fri Jul 20 19:49:03 2012] ../../acisf12382/products/spectra/fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src1.wrmf not found
[Fri Jul 20 19:49:03 2012] Removal of ../../acisf12382/products/spectra/fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src1.soff failed
[Fri Jul 20 20:02:45 2012] Spectrum 1 has only 44 counts, deleting rmf
[Fri Jul 20 20:02:45 2012] 182.309
[Fri Jul 20 20:46:38 2012] Updating aperture counts using extracted products
[Fri Jul 20 20:46:38 2012] Error reading totcts from fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Jul 20 20:46:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 20:46:38 2012] Using photon index=1.80, rate=0.00137, arf fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src1.arf
[Fri Jul 20 20:46:38 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jul 20 20:46:38 2012] Updating source flux to 2.4e-14
[Fri Jul 20 20:46:49 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jul 20 20:46:50 2012] acisf12382/analysis//spectral/fullrun_ccd2_acisf12382_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete