[Fri Jul 20 13:42:48 2012] Detection parameters:
  Position = (396.2, 522.6) = 17 19 29.42 -36 7 39.8
  Extent = 0.5" x 0.5", rotation angle = 171 degrees
  Source counts = 96.0 +/- 9.9
  Background counts = 2.0
  Rate = 0.003 +/- 0.0003

[Fri Jul 20 13:42:48 2012] Off-axis axis estimate = 4.06'
[Fri Jul 20 13:59:00 2012] Using EEF radius (= 0.85 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 13:59:00 2012] Initial guess for spatial extent in simple fitting = 0.85"
[Fri Jul 20 13:59:00 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.009
[Fri Jul 20 13:59:00 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 0.85"
[Fri Jul 20 14:39:17 2012] fullrun_ccd1_acisf12382_pi14-548_cl_pass0_src3.ximg exists
[Fri Jul 20 14:39:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12382_pi14-548_cl_pass0_src3.csv
[Fri Jul 20 14:39:17 2012] fullrun_ccd1_acisf12382_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Jul 20 14:39:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12382_pi14-548_cl_pass0_src3.csv
[Fri Jul 20 14:39:17 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12382_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12382_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 14:39:17 2012] fullrun_ccd1_acisf12382_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Jul 20 14:39:17 2012] fullrun_ccd1_acisf12382_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jul 20 14:39:17 2012] Fit fullrun_ccd1_acisf12382_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jul 20 16:31:46 2012] Spatial fit model total counts = 92.788700, observed total counts = 99.000000
[Fri Jul 20 16:31:46 2012] Offset between fit and detection position for source 13 = 0.659305 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.659305 pixels
  Position = (396.6, 523.2) = 17 19 29.42 -36 7 39.7
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 93.0 +/- 9.6
  Background counts = 0.0
  Rate = 0.003 +/- 0.0003
[Fri Jul 20 16:31:46 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 16:31:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 16:31:46 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 16:31:46 2012] Source does appear to be extended
[Fri Jul 20 16:31:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 16:44:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 16:44:00 2012] Initial guess for spatial extent in simple fitting = 0.71"
[Fri Jul 20 16:44:00 2012] source mask rpix=1.4, npix_max = 15, mask sum = 12, frac = 0.795
[Fri Jul 20 16:44:00 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 0.71"
[Fri Jul 20 17:24:39 2012] fullrun_ccd1_acisf12382_pi14-548_cl_pass1_src3.ximg exists
[Fri Jul 20 17:24:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12382_pi14-548_cl_pass1_src3.csv
[Fri Jul 20 17:24:39 2012] fullrun_ccd1_acisf12382_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Jul 20 17:24:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12382_pi14-548_cl_pass1_src3.csv
[Fri Jul 20 17:24:39 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12382_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12382_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 17:24:39 2012] fullrun_ccd1_acisf12382_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Jul 20 17:24:39 2012] fullrun_ccd1_acisf12382_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jul 20 17:24:39 2012] Fit fullrun_ccd1_acisf12382_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jul 20 19:10:34 2012] Spatial fit model total counts = 93.864500, observed total counts = 99.000000
[Fri Jul 20 19:10:34 2012] Offset between fit and detection position for source 13 = 0.017386 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.017386 pixels
  Position = (396.5, 523.2) = 17 19 29.42 -36 7 39.7
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 94.0 +/- 9.7
  Background counts = 0.0
  Rate = 0.003 +/- 0.0003
[Fri Jul 20 19:10:34 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 19:10:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 19:10:34 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 19:10:34 2012] Source does appear to be extended
[Fri Jul 20 19:10:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 19:18:29 2012] Writing source region out to fullrun_ccd1_acisf12382_pi14-548_pass1_cl_src13_src.reg
[Fri Jul 20 19:18:29 2012] Extracting stamp from image fullrun_ccd1_acisf12382_pi14-548_cl_sm2.00.img.gz, (365, 491) - (428, 555)
[Fri Jul 20 19:18:29 2012] Writing fullrun_ccd1_acisf12382_pi14-548_pass1_cl_src13.gif
[Fri Jul 20 19:19:38 2012] Size of ../../acisf12382/products/events/fullrun_ccd1_acisf12382_pi14-548_pass1_cl_src13_src.evt.gz[events] = 95 counts
[Fri Jul 20 19:19:38 2012] Mean chipx,y = (312.67, 710.88)
[Fri Jul 20 19:19:38 2012] Mean tdetx,y = (4421.12, 4419.67)
[Fri Jul 20 19:19:38 2012] chipx,y range = (292.00-331.00, 693.00-728.00)
[Fri Jul 20 19:19:38 2012] Size of ../../acisf12382/products/events/fullrun_ccd1_acisf12382_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 16 counts
[Fri Jul 20 19:19:39 2012] Not generating rmf since there are only 93 counts
[Fri Jul 20 19:19:39 2012] arf not found, will run specextract
[Fri Jul 20 19:20:03 2012] ../../acisf12382/products/spectra/fullrun_ccd1_acisf12382_pi14-548_pass1_cl_src13.warf not found
[Fri Jul 20 19:20:03 2012] ../../acisf12382/products/spectra/fullrun_ccd1_acisf12382_pi14-548_pass1_cl_src13.wrmf not found
[Fri Jul 20 19:20:03 2012] Removal of ../../acisf12382/products/spectra/fullrun_ccd1_acisf12382_pi14-548_pass1_cl_src13.soff failed
[Fri Jul 20 19:47:31 2012] Spectrum 13 has only 94 counts, deleting rmf
[Fri Jul 20 19:47:31 2012] 183.66
[Fri Jul 20 20:46:37 2012] Updating aperture counts using extracted products
[Fri Jul 20 20:46:37 2012] Error reading totcts from fullrun_ccd1_acisf12382_pi14-548_pass1_cl_src13_src.pi.gz
[Fri Jul 20 20:46:37 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 20:46:37 2012] Using photon index=1.80, rate=0.00293, arf fullrun_ccd1_acisf12382_pi14-548_pass1_cl_src13.arf
[Fri Jul 20 20:46:37 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jul 20 20:46:37 2012] Updating source flux to 5e-14
[Fri Jul 20 20:46:48 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jul 20 20:46:49 2012] acisf12382/analysis//spectral/fullrun_ccd1_acisf12382_pi14-548_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete