[Fri Jul 20 13:42:16 2012] Detection parameters:
  Position = (629.8, 1066.3) = 17 19 32.71 -36 11 10.6
  Extent = 0.5" x 0.5", rotation angle = 176 degrees
  Source counts = 12.5 +/- 3.6
  Background counts = 0.5
  Rate = 0.0004 +/- 0.0001

[Fri Jul 20 13:42:17 2012] Off-axis axis estimate = 3.87'
[Fri Jul 20 13:47:41 2012] Using EEF radius (= 0.79 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 13:47:41 2012] Initial guess for spatial extent in simple fitting = 0.79"
[Fri Jul 20 13:47:41 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.899
[Fri Jul 20 13:47:41 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 0.79"
[Fri Jul 20 13:59:00 2012] fullrun_ccd0_acisf12382_pi14-548_cl_pass0_src3.ximg exists
[Fri Jul 20 13:59:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12382_pi14-548_cl_pass0_src3.csv
[Fri Jul 20 13:59:00 2012] fullrun_ccd0_acisf12382_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Jul 20 13:59:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12382_pi14-548_cl_pass0_src3.csv
[Fri Jul 20 13:59:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12382_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12382_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 13:59:00 2012] fullrun_ccd0_acisf12382_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Jul 20 13:59:00 2012] fullrun_ccd0_acisf12382_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jul 20 13:59:00 2012] Fit fullrun_ccd0_acisf12382_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jul 20 16:31:42 2012] Spatial fit model total counts = 13.851100, observed total counts = 14.000000
[Fri Jul 20 16:31:42 2012] Offset between fit and detection position for source 6 = 0.531428 pixels
[Fri Jul 20 16:31:42 2012] 13.702240 total counts/ 1.496740 bgd. counts: snr = 9.976596
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.531428 pixels
  Position = (630.0, 1066.8) = 17 19 32.72 -36 11 10.6
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 12.2 +/- 3.7
  Background counts = 1.5
  Rate = 0.0004 +/- 0.0001
[Fri Jul 20 16:31:42 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 16:31:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 16:31:42 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 16:31:42 2012] Source does appear to be extended
[Fri Jul 20 16:31:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 16:32:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 16:32:19 2012] Initial guess for spatial extent in simple fitting = 0.48"
[Fri Jul 20 16:32:19 2012] source mask rpix=1.0, npix_max = 8, mask sum = 6, frac = 0.698
[Fri Jul 20 16:32:19 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 0.48"
[Fri Jul 20 16:44:00 2012] fullrun_ccd0_acisf12382_pi14-548_cl_pass1_src3.ximg exists
[Fri Jul 20 16:44:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12382_pi14-548_cl_pass1_src3.csv
[Fri Jul 20 16:44:00 2012] fullrun_ccd0_acisf12382_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Jul 20 16:44:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12382_pi14-548_cl_pass1_src3.csv
[Fri Jul 20 16:44:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12382_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12382_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 16:44:00 2012] fullrun_ccd0_acisf12382_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Jul 20 16:44:00 2012] fullrun_ccd0_acisf12382_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jul 20 16:44:00 2012] Fit fullrun_ccd0_acisf12382_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jul 20 19:10:30 2012] Spatial fit model total counts = 13.378800, observed total counts = 14.000000
[Fri Jul 20 19:10:30 2012] Offset between fit and detection position for source 6 = 0.025507 pixels
[Fri Jul 20 19:10:30 2012] 13.224410 total counts/ 1.305510 bgd. counts: snr = 10.431483
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.025507 pixels
  Position = (630.0, 1066.8) = 17 19 32.72 -36 11 10.6
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 11.9 +/- 3.6
  Background counts = 1.3
  Rate = 0.0004 +/- 0.0001
[Fri Jul 20 19:10:30 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 19:10:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 19:10:30 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 19:10:30 2012] Source does appear to be extended
[Fri Jul 20 19:10:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 19:11:08 2012] Writing source region out to fullrun_ccd0_acisf12382_pi14-548_pass1_cl_src6_src.reg
[Fri Jul 20 19:11:08 2012] Extracting stamp from image fullrun_ccd0_acisf12382_pi14-548_cl_sm2.00.img.gz, (607, 1043) - (653, 1090)
[Fri Jul 20 19:11:08 2012] Writing fullrun_ccd0_acisf12382_pi14-548_pass1_cl_src6.gif
[Fri Jul 20 19:13:31 2012] Size of ../../acisf12382/products/events/fullrun_ccd0_acisf12382_pi14-548_pass1_cl_src6_src.evt.gz[events] = 13 counts
[Fri Jul 20 19:13:31 2012] Mean chipx,y = (661.46, 928.92)
[Fri Jul 20 19:13:31 2012] Mean tdetx,y = (3989.92, 4470.54)
[Fri Jul 20 19:13:31 2012] chipx,y range = (649.00-672.00, 912.00-943.00)
[Fri Jul 20 19:13:31 2012] Size of ../../acisf12382/products/events/fullrun_ccd0_acisf12382_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 6 counts
[Fri Jul 20 19:13:32 2012] Not generating rmf since there are only 11 counts
[Fri Jul 20 19:13:32 2012] arf not found, will run specextract
[Fri Jul 20 19:14:00 2012] ../../acisf12382/products/spectra/fullrun_ccd0_acisf12382_pi14-548_pass1_cl_src6.warf not found
[Fri Jul 20 19:14:00 2012] ../../acisf12382/products/spectra/fullrun_ccd0_acisf12382_pi14-548_pass1_cl_src6.wrmf not found
[Fri Jul 20 19:14:00 2012] Removal of ../../acisf12382/products/spectra/fullrun_ccd0_acisf12382_pi14-548_pass1_cl_src6.soff failed
[Fri Jul 20 19:18:29 2012] Spectrum 6 has only 12 counts, deleting rmf
[Fri Jul 20 19:18:29 2012] 177.961
[Fri Jul 20 20:46:36 2012] Updating aperture counts using extracted products
[Fri Jul 20 20:46:36 2012] Error reading totcts from fullrun_ccd0_acisf12382_pi14-548_pass1_cl_src6_src.pi.gz
[Fri Jul 20 20:46:37 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 20:46:37 2012] Using photon index=1.80, rate=0.000372, arf fullrun_ccd0_acisf12382_pi14-548_pass1_cl_src6.arf
[Fri Jul 20 20:46:37 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jul 20 20:46:37 2012] Updating source flux to 6.5e-15
[Fri Jul 20 20:46:45 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jul 20 20:46:48 2012] acisf12382/analysis//spectral/fullrun_ccd0_acisf12382_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete