[Fri Jul 20 13:42:16 2012] Detection parameters:
  Position = (792.6, 972.3) = 17 19 26.09 -36 11 56.7
  Extent = 1.1" x 0.5", rotation angle = 9 degrees
  Source counts = 13.2 +/- 3.7
  Background counts = 0.8
  Rate = 0.0004 +/- 0.0001

[Fri Jul 20 13:42:17 2012] Off-axis axis estimate = 5.41'
[Fri Jul 20 13:47:41 2012] Using EEF radius (= 1.35 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 13:47:41 2012] Initial guess for spatial extent in simple fitting = 1.35"
[Fri Jul 20 13:47:41 2012] source mask rpix=2.7, npix_max = 42, mask sum = 49, frac = 1.163
[Fri Jul 20 13:47:41 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 1.35"
[Fri Jul 20 13:59:00 2012] fullrun_ccd0_acisf12382_pi14-548_cl_pass0_src6.ximg exists
[Fri Jul 20 13:59:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12382_pi14-548_cl_pass0_src6.csv
[Fri Jul 20 13:59:00 2012] fullrun_ccd0_acisf12382_pi14-548_cl_pass0_src6_1.ximg exists
[Fri Jul 20 13:59:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12382_pi14-548_cl_pass0_src6.csv
[Fri Jul 20 13:59:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12382_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12382_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 13:59:00 2012] fullrun_ccd0_acisf12382_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Fri Jul 20 13:59:00 2012] fullrun_ccd0_acisf12382_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jul 20 13:59:00 2012] Fit fullrun_ccd0_acisf12382_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Jul 20 16:31:42 2012] Spatial fit model total counts = 20.528200, observed total counts = 22.000000
[Fri Jul 20 16:31:42 2012] Offset between fit and detection position for source 11 = 1.624631 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.624631 pixels
  Position = (794.1, 971.9) = 17 19 26.05 -36 11 57.2
  Extent = 1.4 (1.1-1.8)", rotation angle = 0
  Source counts = 19.6 +/- 4.4
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Fri Jul 20 16:31:42 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 16:31:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 16:31:42 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 16:31:42 2012] Source does appear to be extended
[Fri Jul 20 16:31:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 16:32:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 16:32:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 20 16:32:19 2012] Initial guess for spatial extent in simple fitting = 1.45"
[Fri Jul 20 16:32:19 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.031
[Fri Jul 20 16:32:19 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 1.45"
[Fri Jul 20 16:44:00 2012] fullrun_ccd0_acisf12382_pi14-548_cl_pass1_src6.ximg exists
[Fri Jul 20 16:44:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12382_pi14-548_cl_pass1_src6.csv
[Fri Jul 20 16:44:00 2012] fullrun_ccd0_acisf12382_pi14-548_cl_pass1_src6_1.ximg exists
[Fri Jul 20 16:44:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12382_pi14-548_cl_pass1_src6.csv
[Fri Jul 20 16:44:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12382_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12382_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 16:44:00 2012] fullrun_ccd0_acisf12382_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Fri Jul 20 16:44:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12382_pi14-548_cl_pass1_tfrozen_src6.csv
[Fri Jul 20 16:44:00 2012] fullrun_ccd0_acisf12382_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Jul 20 16:44:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12382_pi14-548_cl_pass1_tfrozen_src6.csv
[Fri Jul 20 16:44:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12382_pi14-548_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12382_pi14-548_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 19:10:30 2012] Spatial fit model total counts = 19.129800, observed total counts = 22.000000
[Fri Jul 20 19:10:30 2012] Offset between fit and detection position for source 11 = 0.042087 pixels
[Fri Jul 20 19:10:30 2012] 18.260355 total counts/ 0.000555 bgd. counts: snr = 775.317974
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.042087 pixels
  Position = (794.1, 971.8) = 17 19 26.05 -36 11 57.2
  Extent = 1.4 (1.0-1.8)", rotation angle = 0
  Source counts = 18.3 +/- 4.3
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Fri Jul 20 19:10:30 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 19:10:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 19:10:30 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 19:10:30 2012] Source does appear to be extended
[Fri Jul 20 19:10:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 19:11:08 2012] Writing source region out to fullrun_ccd0_acisf12382_pi14-548_pass1_cl_src11_src.reg
[Fri Jul 20 19:11:08 2012] Extracting stamp from image fullrun_ccd0_acisf12382_pi14-548_cl_sm2.00.img.gz, (731, 908) - (857, 1035)
[Fri Jul 20 19:11:08 2012] Writing fullrun_ccd0_acisf12382_pi14-548_pass1_cl_src11.gif
[Fri Jul 20 19:16:26 2012] Size of ../../acisf12382/products/events/fullrun_ccd0_acisf12382_pi14-548_pass1_cl_src11_src.evt.gz[events] = 20 counts
[Fri Jul 20 19:16:26 2012] Mean chipx,y = (473.40, 889.10)
[Fri Jul 20 19:16:26 2012] Mean tdetx,y = (3950.10, 4658.60)
[Fri Jul 20 19:16:26 2012] chipx,y range = (453.00-494.00, 873.00-903.00)
[Fri Jul 20 19:16:26 2012] Size of ../../acisf12382/products/events/fullrun_ccd0_acisf12382_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 32 counts
[Fri Jul 20 19:16:27 2012] Not generating rmf since there are only 18 counts
[Fri Jul 20 19:16:27 2012] arf not found, will run specextract
[Fri Jul 20 19:16:53 2012] ../../acisf12382/products/spectra/fullrun_ccd0_acisf12382_pi14-548_pass1_cl_src11.warf not found
[Fri Jul 20 19:16:53 2012] ../../acisf12382/products/spectra/fullrun_ccd0_acisf12382_pi14-548_pass1_cl_src11.wrmf not found
[Fri Jul 20 19:16:53 2012] Removal of ../../acisf12382/products/spectra/fullrun_ccd0_acisf12382_pi14-548_pass1_cl_src11.soff failed
[Fri Jul 20 19:18:29 2012] Spectrum 11 has only 18 counts, deleting rmf
[Fri Jul 20 19:18:29 2012] 180.149
[Fri Jul 20 20:46:37 2012] Updating aperture counts using extracted products
[Fri Jul 20 20:46:37 2012] Error reading totcts from fullrun_ccd0_acisf12382_pi14-548_pass1_cl_src11_src.pi.gz
[Fri Jul 20 20:46:37 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 20:46:37 2012] Using photon index=1.80, rate=0.00057, arf fullrun_ccd0_acisf12382_pi14-548_pass1_cl_src11.arf
[Fri Jul 20 20:46:37 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jul 20 20:46:37 2012] Updating source flux to 9.8e-15
[Fri Jul 20 20:46:45 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jul 20 20:46:48 2012] acisf12382/analysis//spectral/fullrun_ccd0_acisf12382_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete