[Wed May 15 20:02:49 2013] Detection parameters:
  Position = (412.5, 249.2) = 19 14 22.38 -2 43 29.1
  Extent = 1.0" x 0.5", rotation angle = 66 degrees
  Source counts = 11.4 +/- 3.5
  Background counts = 0.6
  Rate = 0.0004 +/- 0.0001

[Wed May 15 20:02:49 2013] Off-axis axis estimate = 3.37'
[Wed May 15 22:14:30 2013] Using EEF radius (= 0.66 ")to estimate initial spatial extent for simple fitting
[Wed May 15 22:14:30 2013] Initial guess for spatial extent in simple fitting = 0.66"
[Wed May 15 22:14:30 2013] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.882
[Wed May 15 22:14:30 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 0.66"
[Wed May 15 22:28:51 2013] fullrun_ccd6_acisf12372_pi14-548_cl_pass0_src7.ximg exists
[Wed May 15 22:28:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12372_pi14-548_cl_pass0_src7.csv
[Wed May 15 22:28:51 2013] fullrun_ccd6_acisf12372_pi14-548_cl_pass0_src7_1.ximg exists
[Wed May 15 22:28:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12372_pi14-548_cl_pass0_src7.csv
[Wed May 15 22:28:51 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12372_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12372_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 22:28:51 2013] fullrun_ccd6_acisf12372_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Wed May 15 22:28:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12372_pi14-548_cl_pass0_tfrozen_src7.csv
[Wed May 15 22:28:51 2013] fullrun_ccd6_acisf12372_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Wed May 15 22:28:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12372_pi14-548_cl_pass0_tfrozen_src7.csv
[Wed May 15 22:28:51 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12372_pi14-548_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12372_pi14-548_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 22:43:40 2013] Spatial fit model total counts = 11.385400, observed total counts = 13.000000
[Wed May 15 22:43:40 2013] Offset between fit and detection position for source 7 = 1.289854 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 1.289854 pixels
  Position = (413.3, 250.2) = 19 14 22.37 -2 43 28.9
  Extent = 1.2 (0.7-1.5)" x 0.3 (0.2-0.5)", rotation angle = 111 (96-123) degrees
  Source counts = 10.7 +/- 3.3
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Wed May 15 22:43:40 2013] Vigneting correction estimate = 1.000000
[Wed May 15 22:43:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 22:43:40 2013] Assessing source extent using major axis lower bound
[Wed May 15 22:43:40 2013] Source does appear to be extended
[Wed May 15 22:43:40 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.50
[Wed May 15 22:43:40 2013] Source is asymmetric
[Thu May 16 00:18:53 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 16 00:18:53 2013] Initial guess for spatial extent in simple fitting = 0.75"
[Thu May 16 00:18:53 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.984
[Thu May 16 00:18:53 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 0.75"
[Thu May 16 00:34:48 2013] fullrun_ccd6_acisf12372_pi14-548_cl_pass1_src7.ximg exists
[Thu May 16 00:34:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12372_pi14-548_cl_pass1_src7.csv
[Thu May 16 00:34:48 2013] fullrun_ccd6_acisf12372_pi14-548_cl_pass1_src7_1.ximg exists
[Thu May 16 00:34:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12372_pi14-548_cl_pass1_src7.csv
[Thu May 16 00:34:48 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12372_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12372_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 00:34:48 2013] fullrun_ccd6_acisf12372_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Thu May 16 00:34:48 2013] fullrun_ccd6_acisf12372_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Thu May 16 00:34:48 2013] Fit fullrun_ccd6_acisf12372_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Thu May 16 00:47:55 2013] Spatial fit model total counts = 11.406100, observed total counts = 13.000000
[Thu May 16 00:47:55 2013] Offset between fit and detection position for source 7 = 0.114151 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.114151 pixels
  Position = (413.3, 250.1) = 19 14 22.37 -2 43 28.9
  Extent = 1.1 (0.8-1.5)" x 0.3 (0.2-0.5)", rotation angle = 110 (96-123) degrees
  Source counts = 10.7 +/- 3.3
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Thu May 16 00:47:55 2013] Vigneting correction estimate = 1.000000
[Thu May 16 00:47:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 00:47:55 2013] Assessing source extent using major axis lower bound
[Thu May 16 00:47:55 2013] Source does appear to be extended
[Thu May 16 00:47:55 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.54
[Thu May 16 00:47:55 2013] Source is asymmetric
[Thu May 16 00:50:38 2013] Writing source region out to fullrun_ccd6_acisf12372_pi14-548_pass1_cl_src7_src.reg
[Thu May 16 00:50:38 2013] Extracting stamp from image fullrun_ccd6_acisf12372_pi14-548_cl_sm2.00.img.gz, (361, 198) - (466, 302)
[Thu May 16 00:50:38 2013] Writing fullrun_ccd6_acisf12372_pi14-548_pass1_cl_src7.gif
[Thu May 16 00:54:55 2013] Size of ../../acisf12372/products/events/fullrun_ccd6_acisf12372_pi14-548_pass1_cl_src7_src.evt.gz[events] = 11 counts
[Thu May 16 00:54:55 2013] Mean chipx,y = (919.73, 221.00)
[Thu May 16 00:54:55 2013] Mean tdetx,y = (3794.73, 1923.00)
[Thu May 16 00:54:55 2013] chipx,y range = (901.00-937.00, 208.00-237.00)
[Thu May 16 00:54:55 2013] Size of ../../acisf12372/products/events/fullrun_ccd6_acisf12372_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 31 counts
[Thu May 16 00:54:56 2013] Not generating rmf since there are only 10 counts
[Thu May 16 00:54:56 2013] arf not found, will run specextract
[Thu May 16 00:55:23 2013] ../../acisf12372/products/spectra/fullrun_ccd6_acisf12372_pi14-548_pass1_cl_src7.warf not found
[Thu May 16 00:55:23 2013] ../../acisf12372/products/spectra/fullrun_ccd6_acisf12372_pi14-548_pass1_cl_src7.wrmf not found
[Thu May 16 00:55:23 2013] Removal of ../../acisf12372/products/spectra/fullrun_ccd6_acisf12372_pi14-548_pass1_cl_src7.soff failed
[Thu May 16 00:58:17 2013] Spectrum 7 has only 11 counts, deleting rmf
[Thu May 16 00:58:17 2013] 201.328
[Thu May 16 01:03:34 2013] Updating aperture counts using extracted products
[Thu May 16 01:03:34 2013] Total counts from fullrun_ccd6_acisf12372_pi14-548_pass1_cl_src7_src.pi.gz = 11.00
[Thu May 16 01:03:34 2013] Total counts from fullrun_ccd6_acisf12372_pi14-548_pass1_cl_src7_bgd.pi.gz = 31.00
[Thu May 16 01:03:34 2013] Got source and background scale factors 0.000001, 0.000048
[Thu May 16 01:03:34 2013] User source parameters:
  Position = (413.3, 250.1) = 19 14 22.37 -2 43 28.9
  Extent = 1.1 (0.8-1.5)" x 0.3 (0.2-0.5)", rotation angle = 110 (96-123) degrees
  Source aperture counts = 10.2 +/- 4.4
  Background aperture counts = 0.8
  Rate = 0.0003 +/- 0.0002

[Thu May 16 01:03:35 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 16 01:03:35 2013] Using photon index=1.80, rate=0.000364, arf fullrun_ccd6_acisf12372_pi14-548_pass1_cl_src7.arf
[Thu May 16 01:03:35 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May 16 01:03:35 2013] Updating source flux to 4.1e-15
[Thu May 16 01:03:42 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 16 01:03:43 2013] acisf12372/analysis//spectral/fullrun_ccd6_acisf12372_pi14-548_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete