[Sat May 11 00:40:19 2013] Detection parameters:
  Position = (749.0, 319.7) = 17 13 40.93 -37 6 10.5
  Extent = 0.5" x 0.5", rotation angle = 178 degrees
  Source counts = 12.3 +/- 3.6
  Background counts = 0.7
  Rate = 0.0005 +/- 0.0002

[Sat May 11 00:40:19 2013] Off-axis axis estimate = 0.81'
[Sat May 11 01:00:08 2013] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sat May 11 01:00:08 2013] Initial guess for spatial extent in simple fitting = 0.38"
[Sat May 11 01:00:08 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.921
[Sat May 11 01:00:08 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 0.38"
[Sat May 11 01:13:53 2013] fullrun_ccd7_acisf12370_pi14-548_cl_pass0_src10.ximg exists
[Sat May 11 01:13:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12370_pi14-548_cl_pass0_src10.csv
[Sat May 11 01:13:53 2013] fullrun_ccd7_acisf12370_pi14-548_cl_pass0_src10_1.ximg exists
[Sat May 11 01:13:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12370_pi14-548_cl_pass0_src10.csv
[Sat May 11 01:13:53 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12370_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12370_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 01:13:53 2013] fullrun_ccd7_acisf12370_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sat May 11 01:13:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12370_pi14-548_cl_pass0_tfrozen_src10.csv
[Sat May 11 01:13:53 2013] fullrun_ccd7_acisf12370_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sat May 11 01:13:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12370_pi14-548_cl_pass0_tfrozen_src10.csv
[Sat May 11 01:13:53 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12370_pi14-548_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12370_pi14-548_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 01:13:58 2013] Source 5 is offset by -0.486475 and -0.758169 pixels which is larger than
2 X fitted extent = 2.443260 x 0.390297, not incorporating fit results
[Sat May 11 01:13:58 2013] Vigneting correction estimate = 1.000000
[Sat May 11 01:13:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 01:13:58 2013] Assessing source extent using major
[Sat May 11 01:13:58 2013] Source does appear to be extended
[Sat May 11 01:13:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 01:34:11 2013] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sat May 11 01:34:11 2013] Initial guess for spatial extent in simple fitting = 0.38"
[Sat May 11 01:34:11 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.921
[Sat May 11 01:34:11 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 0.38"
[Sat May 11 01:48:19 2013] fullrun_ccd7_acisf12370_pi14-548_cl_pass1_src10.ximg exists
[Sat May 11 01:48:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12370_pi14-548_cl_pass1_src10.csv
[Sat May 11 01:48:19 2013] fullrun_ccd7_acisf12370_pi14-548_cl_pass1_src10_1.ximg exists
[Sat May 11 01:48:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12370_pi14-548_cl_pass1_src10.csv
[Sat May 11 01:48:19 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12370_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12370_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 01:48:19 2013] fullrun_ccd7_acisf12370_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sat May 11 01:48:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12370_pi14-548_cl_pass1_tfrozen_src10.csv
[Sat May 11 01:48:19 2013] fullrun_ccd7_acisf12370_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sat May 11 01:48:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12370_pi14-548_cl_pass1_tfrozen_src10.csv
[Sat May 11 01:48:19 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12370_pi14-548_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12370_pi14-548_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 01:48:23 2013] Source 5 is offset by -0.486475 and -0.758169 pixels which is larger than
2 X fitted extent = 2.443260 x 0.390297, not incorporating fit results
[Sat May 11 01:48:23 2013] Vigneting correction estimate = 1.000000
[Sat May 11 01:48:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 01:48:23 2013] Assessing source extent using major
[Sat May 11 01:48:23 2013] Source does appear to be extended
[Sat May 11 01:48:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 01:55:57 2013] Writing source region out to fullrun_ccd7_acisf12370_pi14-548_pass1_cl_src5_src.reg
[Sat May 11 01:55:57 2013] Extracting stamp from image fullrun_ccd7_acisf12370_pi14-548_cl_sm2.00.img.gz, (726, 297) - (772, 342)
[Sat May 11 01:55:57 2013] Writing fullrun_ccd7_acisf12370_pi14-548_pass1_cl_src5.gif
[Sat May 11 01:58:47 2013] Size of ../../acisf12370/products/events/fullrun_ccd7_acisf12370_pi14-548_pass1_cl_src5_src.evt.gz[events] = 13 counts
[Sat May 11 01:58:47 2013] Mean chipx,y = (203.85, 601.38)
[Sat May 11 01:58:47 2013] Mean tdetx,y = (4120.85, 2303.38)
[Sat May 11 01:58:47 2013] chipx,y range = (189.00-221.00, 586.00-618.00)
[Sat May 11 01:58:47 2013] Size of ../../acisf12370/products/events/fullrun_ccd7_acisf12370_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 8 counts
[Sat May 11 01:58:49 2013] Not generating rmf since there are only 12 counts
[Sat May 11 01:58:49 2013] arf not found, will run specextract
[Sat May 11 01:58:56 2013] ../../acisf12370/products/spectra/fullrun_ccd7_acisf12370_pi14-548_pass1_cl_src5.warf not found
[Sat May 11 01:58:56 2013] ../../acisf12370/products/spectra/fullrun_ccd7_acisf12370_pi14-548_pass1_cl_src5.wrmf not found
[Sat May 11 01:58:56 2013] Removal of ../../acisf12370/products/spectra/fullrun_ccd7_acisf12370_pi14-548_pass1_cl_src5.soff failed
[Sat May 11 02:02:28 2013] Spectrum 5 has only 12 counts, deleting rmf
[Sat May 11 02:02:28 2013] 234.014
[Sat May 11 02:02:33 2013] Updating aperture counts using extracted products
[Sat May 11 02:02:33 2013] Total counts from fullrun_ccd7_acisf12370_pi14-548_pass1_cl_src5_src.pi.gz = 13.00
[Sat May 11 02:02:33 2013] Total counts from fullrun_ccd7_acisf12370_pi14-548_pass1_cl_src5_bgd.pi.gz = 8.00
[Sat May 11 02:02:33 2013] Got source and background scale factors 0.000001, 0.000009
[Sat May 11 02:02:33 2013] User source parameters:
  Position = (749.0, 319.7) = 17 13 40.93 -37 6 10.5
  Extent = 0.5" x 0.5", rotation angle = 178
  Source aperture counts = 12.3 +/- 4.7
  Background aperture counts = 0.7
  Rate = 0.0005 +/- 0.0002

[Sat May 11 02:02:33 2013] Updating counts from extracted products
[Sat May 11 02:02:33 2013] Set source signif. to 12.32/0.82 = 15.00
[Sat May 11 02:02:34 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 02:02:34 2013] Using photon index=1.80, rate=0.000547, arf fullrun_ccd7_acisf12370_pi14-548_pass1_cl_src5.arf
[Sat May 11 02:02:34 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat May 11 02:02:34 2013] Updating source flux to 6.6e-15
[Sat May 11 02:02:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 11 02:02:41 2013] acisf12370/analysis//spectral/fullrun_ccd7_acisf12370_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete