[Mon May 13 00:20:17 2013] Detection parameters:
  Position = (765.4, 1150.6) = 19 18 38.14 6 30 52.9
  Extent = 0.7" x 0.5", rotation angle = 71 degrees
  Source counts = 26.5 +/- 5.2
  Background counts = 0.5
  Rate = 0.0009 +/- 0.0002

[Mon May 13 00:20:17 2013] Off-axis axis estimate = 2.73'
[Mon May 13 00:33:04 2013] Using EEF radius (= 0.53 ")to estimate initial spatial extent for simple fitting
[Mon May 13 00:33:04 2013] Initial guess for spatial extent in simple fitting = 0.53"
[Mon May 13 00:33:04 2013] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.907
[Mon May 13 00:33:04 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 0.53"
[Mon May 13 00:47:59 2013] fullrun_ccd6_acisf12368_pi14-548_cl_pass0_src3.ximg exists
[Mon May 13 00:47:59 2013] fullrun_ccd6_acisf12368_pi14-548_cl_pass0_src3_1.ximg exists
[Mon May 13 00:47:59 2013] Fit fullrun_ccd6_acisf12368_pi14-548_cl_pass0_src3 appears to have run properly
[Mon May 13 00:47:59 2013] fullrun_ccd6_acisf12368_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon May 13 00:47:59 2013] fullrun_ccd6_acisf12368_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon May 13 00:47:59 2013] Fit fullrun_ccd6_acisf12368_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon May 13 00:55:25 2013] Spatial fit model total counts = 27.446800, observed total counts = 28.000000
[Mon May 13 00:55:25 2013] Offset between fit and detection position for source 10 = 1.053076 pixels
[Mon May 13 00:55:25 2013] 26.905695 total counts/ 0.873795 bgd. counts: snr = 27.848454
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.053076 pixels
  Position = (766.1, 1151.5) = 19 18 38.14 6 30 53.0
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 26.0 +/- 5.2
  Background counts = 0.9
  Rate = 0.0009 +/- 0.0002
[Mon May 13 00:55:25 2013] Vigneting correction estimate = 1.000000
[Mon May 13 00:55:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 00:55:25 2013] Assessing source extent using major axis lower bound
[Mon May 13 00:55:25 2013] Source does appear to be extended
[Mon May 13 00:55:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 01:04:23 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 01:04:23 2013] Initial guess for spatial extent in simple fitting = 0.67"
[Mon May 13 01:04:23 2013] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.868
[Mon May 13 01:04:23 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 0.67"
[Mon May 13 01:18:13 2013] fullrun_ccd6_acisf12368_pi14-548_cl_pass1_src3.ximg exists
[Mon May 13 01:18:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12368_pi14-548_cl_pass1_src3.csv
[Mon May 13 01:18:13 2013] fullrun_ccd6_acisf12368_pi14-548_cl_pass1_src3_1.ximg exists
[Mon May 13 01:18:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12368_pi14-548_cl_pass1_src3.csv
[Mon May 13 01:18:13 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12368_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12368_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 01:18:13 2013] fullrun_ccd6_acisf12368_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon May 13 01:18:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12368_pi14-548_cl_pass1_tfrozen_src3.csv
[Mon May 13 01:18:13 2013] fullrun_ccd6_acisf12368_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon May 13 01:18:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12368_pi14-548_cl_pass1_tfrozen_src3.csv
[Mon May 13 01:18:13 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12368_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12368_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 01:24:20 2013] Spatial fit model total counts = 25.575000, observed total counts = 28.000000
[Mon May 13 01:24:20 2013] Offset between fit and detection position for source 10 = 0.080899 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.080899 pixels
  Position = (766.2, 1151.4) = 19 18 38.14 6 30 53.0
  Extent = 0.8 (0.6-1.1)" x 0.5 (0.4-0.7)", rotation angle = 90 (57-127) degrees
  Source counts = 24.6 +/- 5.0
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Mon May 13 01:24:20 2013] Vigneting correction estimate = 1.000000
[Mon May 13 01:24:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 01:24:20 2013] Assessing source extent using major axis lower bound
[Mon May 13 01:24:20 2013] Source does appear to be extended
[Mon May 13 01:24:20 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.78
[Mon May 13 01:27:27 2013] Writing source region out to fullrun_ccd6_acisf12368_pi14-548_pass1_cl_src10_src.reg
[Mon May 13 01:27:27 2013] Extracting stamp from image fullrun_ccd6_acisf12368_pi14-548_cl_sm2.00.img.gz, (728, 1114) - (804, 1189)
[Mon May 13 01:27:27 2013] Writing fullrun_ccd6_acisf12368_pi14-548_pass1_cl_src10.gif
[Mon May 13 01:28:34 2013] Size of ../../acisf12368/products/events/fullrun_ccd6_acisf12368_pi14-548_pass1_cl_src10_src.evt.gz[events] = 26 counts
[Mon May 13 01:28:34 2013] Mean chipx,y = (946.96, 342.04)
[Mon May 13 01:28:34 2013] Mean tdetx,y = (3821.96, 2044.04)
[Mon May 13 01:28:34 2013] chipx,y range = (928.00-965.00, 326.00-363.00)
[Mon May 13 01:28:34 2013] Size of ../../acisf12368/products/events/fullrun_ccd6_acisf12368_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 9 counts
[Mon May 13 01:28:35 2013] Not generating rmf since there are only 24 counts
[Mon May 13 01:28:35 2013] arf not found, will run specextract
[Mon May 13 01:29:02 2013] ../../acisf12368/products/spectra/fullrun_ccd6_acisf12368_pi14-548_pass1_cl_src10.warf not found
[Mon May 13 01:29:02 2013] ../../acisf12368/products/spectra/fullrun_ccd6_acisf12368_pi14-548_pass1_cl_src10.wrmf not found
[Mon May 13 01:29:02 2013] Removal of ../../acisf12368/products/spectra/fullrun_ccd6_acisf12368_pi14-548_pass1_cl_src10.soff failed
[Mon May 13 01:38:03 2013] Spectrum 10 has only 25 counts, deleting rmf
[Mon May 13 01:38:03 2013] 205.411
[Mon May 13 01:42:21 2013] Updating aperture counts using extracted products
[Mon May 13 01:42:21 2013] Total counts from fullrun_ccd6_acisf12368_pi14-548_pass1_cl_src10_src.pi.gz = 26.00
[Mon May 13 01:42:21 2013] Total counts from fullrun_ccd6_acisf12368_pi14-548_pass1_cl_src10_bgd.pi.gz = 9.00
[Mon May 13 01:42:21 2013] Got source and background scale factors 0.000001, 0.000025
[Mon May 13 01:42:21 2013] User source parameters:
  Position = (766.2, 1151.4) = 19 18 38.14 6 30 53.0
  Extent = 0.8 (0.6-1.1)" x 0.5 (0.4-0.7)", rotation angle = 90 (57-127) degrees
  Source aperture counts = 25.5 +/- 6.2
  Background aperture counts = 0.5
  Rate = 0.0009 +/- 0.0002

[Mon May 13 01:42:23 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 01:42:23 2013] Using photon index=1.80, rate=0.000872, arf fullrun_ccd6_acisf12368_pi14-548_pass1_cl_src10.arf
[Mon May 13 01:42:23 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May 13 01:42:23 2013] Updating source flux to 1e-14
[Mon May 13 01:42:34 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 01:42:35 2013] acisf12368/analysis//spectral/fullrun_ccd6_acisf12368_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete