[Wed May  8 10:31:16 2013] Detection parameters:
  Position = (852.7, 938.7) = 17 35 35.33 -40 11 21.0
  Extent = 0.5" x 0.5", rotation angle = 31 degrees
  Source counts = 10.9 +/- 3.5
  Background counts = 1.1
  Rate = 0.0004 +/- 0.0001

[Wed May  8 10:31:16 2013] Off-axis axis estimate = 1.08'
[Wed May  8 12:58:29 2013] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed May  8 12:58:29 2013] Initial guess for spatial extent in simple fitting = 0.38"
[Wed May  8 12:58:29 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.388
[Wed May  8 12:58:29 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 0.38"
[Wed May  8 13:19:47 2013] fullrun_ccd7_acisf12367_pi14-548_cl_pass0_src19.ximg exists
[Wed May  8 13:19:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12367_pi14-548_cl_pass0_src19.csv
[Wed May  8 13:19:47 2013] fullrun_ccd7_acisf12367_pi14-548_cl_pass0_src19_1.ximg exists
[Wed May  8 13:19:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12367_pi14-548_cl_pass0_src19.csv
[Wed May  8 13:19:47 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12367_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12367_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 13:19:47 2013] fullrun_ccd7_acisf12367_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Wed May  8 13:19:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12367_pi14-548_cl_pass0_tfrozen_src19.csv
[Wed May  8 13:19:47 2013] fullrun_ccd7_acisf12367_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Wed May  8 13:19:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12367_pi14-548_cl_pass0_tfrozen_src19.csv
[Wed May  8 13:19:47 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12367_pi14-548_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12367_pi14-548_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 13:19:54 2013] Spatial fit model total counts = 12.596500, observed total counts = 16.000000
[Wed May  8 13:19:54 2013] Offset between fit and detection position for source 18 = 0.428425 pixels
[Wed May  8 13:19:54 2013] 12.574310 total counts/ 1.383210 bgd. counts: snr = 9.515437
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.428425 pixels
  Position = (852.9, 939.0) = 17 35 35.34 -40 11 21.1
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 11.2 +/- 3.5
  Background counts = 1.4
  Rate = 0.0004 +/- 0.0001
[Wed May  8 13:19:54 2013] Vigneting correction estimate = 1.000000
[Wed May  8 13:19:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 13:19:54 2013] Assessing source extent using major axis lower bound
[Wed May  8 13:19:54 2013] Source does appear to be extended
[Wed May  8 13:19:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 14:52:13 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  8 14:52:13 2013] Initial guess for spatial extent in simple fitting = 0.49"
[Wed May  8 14:52:13 2013] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.015
[Wed May  8 14:52:13 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 0.49"
[Wed May  8 15:13:32 2013] fullrun_ccd7_acisf12367_pi14-548_cl_pass1_src18.ximg exists
[Wed May  8 15:13:32 2013] fullrun_ccd7_acisf12367_pi14-548_cl_pass1_src18_1.ximg exists
[Wed May  8 15:13:32 2013] Fit fullrun_ccd7_acisf12367_pi14-548_cl_pass1_src18 appears to have run properly
[Wed May  8 15:13:32 2013] fullrun_ccd7_acisf12367_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Wed May  8 15:13:32 2013] fullrun_ccd7_acisf12367_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Wed May  8 15:13:32 2013] Fit fullrun_ccd7_acisf12367_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Wed May  8 15:13:39 2013] Spatial fit model total counts = 17.461800, observed total counts = 18.000000
[Wed May  8 15:13:39 2013] Offset between fit and detection position for source 18 = 0.104110 pixels
[Wed May  8 15:13:39 2013] 18.060480 total counts/ 8.073100 bgd. counts: snr = 3.515049
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.104110 pixels
  Position = (852.9, 938.9) = 17 35 35.34 -40 11 21.1
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 10.0 +/- 4.2
  Background counts = 8.1
  Rate = 0.0003 +/- 0.0001
[Wed May  8 15:13:39 2013] Vigneting correction estimate = 1.000000
[Wed May  8 15:13:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 15:13:39 2013] Assessing source extent using major axis lower bound
[Wed May  8 15:13:39 2013] Source does appear to be extended
[Wed May  8 15:13:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 15:21:39 2013] Writing source region out to fullrun_ccd7_acisf12367_pi14-548_pass1_cl_src18_src.reg
[Wed May  8 15:21:39 2013] Extracting stamp from image fullrun_ccd7_acisf12367_pi14-548_cl_sm2.00.img.gz, (832, 918) - (874, 960)
[Wed May  8 15:21:39 2013] Writing fullrun_ccd7_acisf12367_pi14-548_pass1_cl_src18.gif
[Wed May  8 15:26:51 2013] Size of ../../acisf12367/products/events/fullrun_ccd7_acisf12367_pi14-548_pass1_cl_src18_src.evt.gz[events] = 12 counts
[Wed May  8 15:26:51 2013] Mean chipx,y = (159.50, 365.50)
[Wed May  8 15:26:51 2013] Mean tdetx,y = (4076.50, 2067.50)
[Wed May  8 15:26:51 2013] chipx,y range = (141.00-171.00, 352.00-383.00)
[Wed May  8 15:26:51 2013] Size of ../../acisf12367/products/events/fullrun_ccd7_acisf12367_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 14 counts
[Wed May  8 15:26:52 2013] Not generating rmf since there are only 9 counts
[Wed May  8 15:26:52 2013] arf not found, will run specextract
[Wed May  8 15:26:59 2013] ../../acisf12367/products/spectra/fullrun_ccd7_acisf12367_pi14-548_pass1_cl_src18.warf not found
[Wed May  8 15:26:59 2013] ../../acisf12367/products/spectra/fullrun_ccd7_acisf12367_pi14-548_pass1_cl_src18.wrmf not found
[Wed May  8 15:26:59 2013] Removal of ../../acisf12367/products/spectra/fullrun_ccd7_acisf12367_pi14-548_pass1_cl_src18.soff failed
[Wed May  8 15:30:51 2013] Spectrum 18 has only 10 counts, deleting rmf
[Wed May  8 15:30:51 2013] 231.14
[Wed May  8 15:30:57 2013] Updating aperture counts using extracted products
[Wed May  8 15:30:57 2013] Total counts from fullrun_ccd7_acisf12367_pi14-548_pass1_cl_src18_src.pi.gz = 12.00
[Wed May  8 15:30:57 2013] Total counts from fullrun_ccd7_acisf12367_pi14-548_pass1_cl_src18_bgd.pi.gz = 14.00
[Wed May  8 15:30:57 2013] Got source and background scale factors 0.000001, 0.000008
[Wed May  8 15:30:57 2013] User source parameters:
  Position = (852.9, 938.9) = 17 35 35.34 -40 11 21.1
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source aperture counts = 10.8 +/- 4.6
  Background aperture counts = 1.2
  Rate = 0.0004 +/- 0.0002

[Wed May  8 15:30:59 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 15:30:59 2013] Using photon index=1.80, rate=0.00033, arf fullrun_ccd7_acisf12367_pi14-548_pass1_cl_src18.arf
[Wed May  8 15:30:59 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  8 15:30:59 2013] Updating source flux to 3e-15
[Wed May  8 15:31:12 2013] Source 18 has fewer than 100.000000 counts, skipping spectral fitting