[Wed May 22 11:59:32 2013] Detection parameters:
  Position = (968.4, 1017.6) = 11 14 37.64 54 50 10.8
  Extent = 2.9" x 2.5", rotation angle = 9 degrees
  Source counts = 22.8 +/- 6.9
  Background counts = 25.2
  Rate = 0.001 +/- 0.0004

[Wed May 22 11:59:32 2013] Off-axis axis estimate = 10.86'
[Wed May 22 12:29:29 2013] Using EEF radius (= 5.24 ")to estimate initial spatial extent for simple fitting
[Wed May 22 12:29:29 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 22 12:29:29 2013] Initial guess for spatial extent in simple fitting = 5.24"
[Wed May 22 12:29:29 2013] source mask rpix=10.7, npix_max = 497, mask sum = 529, frac = 1.064
[Wed May 22 12:29:29 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 5.24"
[Wed May 22 12:39:09 2013] fullrun_ccd5_acisf12366_pi14-548_cl_pass0_src1.ximg exists
[Wed May 22 12:39:09 2013] fullrun_ccd5_acisf12366_pi14-548_cl_pass0_src1_1.ximg exists
[Wed May 22 12:39:09 2013] Fit fullrun_ccd5_acisf12366_pi14-548_cl_pass0_src1 appears to have run properly
[Wed May 22 12:39:09 2013] fullrun_ccd5_acisf12366_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed May 22 12:39:09 2013] fullrun_ccd5_acisf12366_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 22 12:39:09 2013] Fit fullrun_ccd5_acisf12366_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May 22 12:51:27 2013] Spatial fit model total counts = 211.947000, observed total counts = 212.000000
[Wed May 22 12:51:27 2013] Offset between fit and detection position for source 1 = 7.044117 pixels
[Wed May 22 12:51:27 2013] 212.505800 total counts/ 52.889800 bgd. counts: snr = 21.947773
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 7.044117 pixels
  Position = (967.6, 1010.6) = 11 14 37.71 54 50 7.1
  Extent = 10.5 (10.4-21.0)" x 7.3 (5.1-9.2)", rotation angle = 25 (7-48) degrees
  Source counts = 159.6 +/- 14.6
  Background counts = 52.9
  Rate = 0.008 +/- 0.0008
[Wed May 22 12:51:27 2013] Vigneting correction estimate = 1.000000
[Wed May 22 12:51:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 12:51:27 2013] Assessing source extent using major axis lower bound
[Wed May 22 12:51:27 2013] Source does appear to be extended
[Wed May 22 12:51:27 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.13
[Wed May 22 13:21:26 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 22 13:21:26 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 22 13:21:26 2013] Initial guess for spatial extent in simple fitting = 8.90"
[Wed May 22 13:21:26 2013] source mask rpix=18.1, npix_max = 1382, mask sum = 1369, frac = 0.990
[Wed May 22 13:21:26 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 8.90"
[Wed May 22 13:39:42 2013] fullrun_ccd5_acisf12366_pi14-548_cl_pass1_src1.ximg exists
[Wed May 22 13:39:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf12366_pi14-548_cl_pass1_src1.csv
[Wed May 22 13:39:42 2013] fullrun_ccd5_acisf12366_pi14-548_cl_pass1_src1_1.ximg exists
[Wed May 22 13:39:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf12366_pi14-548_cl_pass1_src1.csv
[Wed May 22 13:39:43 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd5_acisf12366_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd5_acisf12366_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 13:39:43 2013] fullrun_ccd5_acisf12366_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed May 22 13:39:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf12366_pi14-548_cl_pass1_tfrozen_src1.csv
[Wed May 22 13:39:43 2013] fullrun_ccd5_acisf12366_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 22 13:39:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf12366_pi14-548_cl_pass1_tfrozen_src1.csv
[Wed May 22 13:39:43 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd5_acisf12366_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd5_acisf12366_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 13:51:30 2013] Spatial fit model total counts = 474.986000, observed total counts = 419.000000
[Wed May 22 13:51:30 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 22 13:51:30 2013] Vigneting correction estimate = 1.000000
[Wed May 22 13:51:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 13:51:30 2013] Assessing source extent using major axis lower bound
[Wed May 22 13:51:30 2013] Source does appear to be extended
[Wed May 22 13:51:30 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.13
[Wed May 22 13:54:09 2013] Writing source region out to fullrun_ccd5_acisf12366_pi14-548_pass1_cl_src1_src.reg
[Wed May 22 13:54:09 2013] Extracting stamp from image fullrun_ccd5_acisf12366_pi14-548_cl_sm2.00.img.gz, (488, 531) - (1161, 1161)
[Wed May 22 13:54:09 2013] Writing fullrun_ccd5_acisf12366_pi14-548_pass1_cl_src1.gif
[Wed May 22 13:54:11 2013] Size of ../../acisf12366/products/events/fullrun_ccd5_acisf12366_pi14-548_pass1_cl_src1_src.evt.gz[events] = 362 counts
[Wed May 22 13:54:11 2013] Mean chipx,y = (980.05, 851.07)
[Wed May 22 13:54:11 2013] Mean tdetx,y = (2813.05, 2553.07)
[Wed May 22 13:54:11 2013] chipx,y range = (907.00-1023.00, 767.00-939.00)
[Wed May 22 13:54:11 2013] Size of ../../acisf12366/products/events/fullrun_ccd5_acisf12366_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 2493 counts
[Wed May 22 13:54:12 2013] rmf not found, will run specextract
[Wed May 22 13:54:12 2013] arf not found, will run specextract
[Wed May 22 13:54:20 2013] ../../acisf12366/products/spectra/fullrun_ccd5_acisf12366_pi14-548_pass1_cl_src1.warf not found
[Wed May 22 13:54:20 2013] ../../acisf12366/products/spectra/fullrun_ccd5_acisf12366_pi14-548_pass1_cl_src1.wrmf not found
[Wed May 22 13:54:20 2013] Removal of ../../acisf12366/products/spectra/fullrun_ccd5_acisf12366_pi14-548_pass1_cl_src1.soff failed
[Wed May 22 13:54:27 2013] Keeping rmf generated by specextract
[Wed May 22 13:54:27 2013] 154.747
[Wed May 22 14:00:39 2013] Updating aperture counts using extracted products
[Wed May 22 14:00:39 2013] Total counts from fullrun_ccd5_acisf12366_pi14-548_pass1_cl_src1_src.pi.gz = 362.00
[Wed May 22 14:00:39 2013] Total counts from fullrun_ccd5_acisf12366_pi14-548_pass1_cl_src1_bgd.pi.gz = 2493.00
[Wed May 22 14:00:39 2013] Got source and background scale factors 0.000237, 0.004014
[Wed May 22 14:00:39 2013] User source parameters:
  Position = (967.6, 1010.6) = 11 14 37.71 54 50 7.1
  Extent = 10.5 (10.4-21.0)" x 7.3 (5.1-9.2)", rotation angle = 25 (7-48) degrees
  Source aperture counts = 214.6 +/- 20.0
  Background aperture counts = 147.4
  Rate = 0.01 +/- 0.001

[Wed May 22 14:00:39 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 14:00:39 2013] Using photon index=1.80, rate=0.00829, arf fullrun_ccd5_acisf12366_pi14-548_pass1_cl_src1.arf
[Wed May 22 14:00:39 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May 22 14:00:39 2013] Updating source flux to 8.6e-14
[Wed May 22 14:00:50 2013] Flag p found in src. 1 procflags, skipping spectral fitting
[Wed May 22 14:00:55 2013] Reading fit data from acisf12366/analysis//spectral/fullrun_ccd5_acisf12366_pi14-548_pass1_cl_src1_pl.csv
[Wed May 22 14:00:55 2013] Spectral fit parameter nH value = 3.10989e+14
[Wed May 22 14:00:55 2013] Spectral fit parameter PhoIndex value = 1.76765
[Wed May 22 14:00:55 2013] Failed to get F(0.3-8.0) from acisf12366/analysis//spectral/fullrun_ccd5_acisf12366_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed May 22 14:00:55 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 14:00:55 2013] Using Nh = 3.1e+14, photon index=1.77, rate=0.00829, arf fullrun_ccd5_acisf12366_pi14-548_pass1_cl_src1.arf
[Wed May 22 14:00:55 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May 22 14:00:55 2013] Updating source flux to 8.7e-14