[Thu May  2 13:29:59 2013] Detection parameters:
  Position = (435.1, 107.8) = 20 59 21.36 54 30 36.1
  Extent = 1.5" x 1.1", rotation angle = 177 degrees
  Source counts = 44.2 +/- 7.9
  Background counts = 17.8
  Rate = 0.002 +/- 0.0004

[Thu May  2 13:29:59 2013] Off-axis axis estimate = 10.66'
[Thu May  2 13:32:50 2013] Using EEF radius (= 5.05 ")to estimate initial spatial extent for simple fitting
[Thu May  2 13:32:50 2013] Initial guess for spatial extent in simple fitting = 5.05"
[Thu May  2 13:32:50 2013] source mask rpix=10.3, npix_max = 463, mask sum = 428, frac = 0.924
[Thu May  2 13:32:50 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 5.05"
[Thu May  2 13:50:34 2013] fullrun_ccd3_acisf12365_pi14-548_cl_pass0_src2.ximg exists
[Thu May  2 13:50:34 2013] fullrun_ccd3_acisf12365_pi14-548_cl_pass0_src2_1.ximg exists
[Thu May  2 13:50:34 2013] Fit fullrun_ccd3_acisf12365_pi14-548_cl_pass0_src2 appears to have run properly
[Thu May  2 13:50:34 2013] fullrun_ccd3_acisf12365_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Thu May  2 13:50:34 2013] fullrun_ccd3_acisf12365_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May  2 13:50:34 2013] Fit fullrun_ccd3_acisf12365_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Thu May  2 14:12:57 2013] Spatial fit model total counts = 85.571100, observed total counts = 85.000000
[Thu May  2 14:12:57 2013] Offset between fit and detection position for source 2 = 3.623018 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.623018 pixels
  Position = (438.7, 106.9) = 20 59 21.19 54 30 35.5
  Extent = 5.9 (4.7-7.3)", rotation angle = 0
  Source counts = 86.2 +/- 9.3
  Background counts = 0.0
  Rate = 0.005 +/- 0.0005
[Thu May  2 14:12:57 2013] Vigneting correction estimate = 1.000000
[Thu May  2 14:12:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 14:12:57 2013] Assessing source extent using major axis lower bound
[Thu May  2 14:12:57 2013] Source does appear to be extended
[Thu May  2 14:12:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 14:13:11 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 14:13:11 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  2 14:13:11 2013] Initial guess for spatial extent in simple fitting = 5.95"
[Thu May  2 14:13:11 2013] source mask rpix=12.1, npix_max = 633, mask sum = 527, frac = 0.832
[Thu May  2 14:13:11 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 5.95"
[Thu May  2 14:31:04 2013] fullrun_ccd3_acisf12365_pi14-548_cl_pass1_src2.ximg exists
[Thu May  2 14:31:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12365_pi14-548_cl_pass1_src2.csv
[Thu May  2 14:31:04 2013] fullrun_ccd3_acisf12365_pi14-548_cl_pass1_src2_1.ximg exists
[Thu May  2 14:31:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12365_pi14-548_cl_pass1_src2.csv
[Thu May  2 14:31:04 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12365_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12365_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 14:31:04 2013] fullrun_ccd3_acisf12365_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Thu May  2 14:31:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12365_pi14-548_cl_pass1_tfrozen_src2.csv
[Thu May  2 14:31:04 2013] fullrun_ccd3_acisf12365_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May  2 14:31:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12365_pi14-548_cl_pass1_tfrozen_src2.csv
[Thu May  2 14:31:04 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12365_pi14-548_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12365_pi14-548_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 14:51:42 2013] Warning, spatial fit 2 centroid is now closest to src. 4
[Thu May  2 14:51:42 2013] Vigneting correction estimate = 1.000000
[Thu May  2 14:51:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 14:51:42 2013] Assessing source extent using major axis lower bound
[Thu May  2 14:51:42 2013] Source does appear to be extended
[Thu May  2 14:51:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 14:51:56 2013] Writing source region out to fullrun_ccd3_acisf12365_pi14-548_pass1_cl_src2_src.reg
[Thu May  2 14:51:56 2013] Extracting stamp from image fullrun_ccd3_acisf12365_pi14-548_cl_sm2.00.img.gz, (167, 0) - (711, 379)
[Thu May  2 14:51:56 2013] Writing fullrun_ccd3_acisf12365_pi14-548_pass1_cl_src2.gif
[Thu May  2 14:52:35 2013] Size of ../../acisf12365/products/events/fullrun_ccd3_acisf12365_pi14-548_pass1_cl_src2_src.evt.gz[events] = 90 counts
[Thu May  2 14:52:35 2013] Mean chipx,y = (449.90, 1005.96)
[Thu May  2 14:52:35 2013] Mean tdetx,y = (4126.04, 3510.90)
[Thu May  2 14:52:35 2013] chipx,y range = (395.00-504.00, 962.00-1022.00)
[Thu May  2 14:52:35 2013] Size of ../../acisf12365/products/events/fullrun_ccd3_acisf12365_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 151 counts
[Thu May  2 14:52:36 2013] Not generating rmf since there are only 86 counts
[Thu May  2 14:52:36 2013] arf not found, will run specextract
[Thu May  2 14:53:07 2013] ../../acisf12365/products/spectra/fullrun_ccd3_acisf12365_pi14-548_pass1_cl_src2.warf not found
[Thu May  2 14:53:07 2013] ../../acisf12365/products/spectra/fullrun_ccd3_acisf12365_pi14-548_pass1_cl_src2.wrmf not found
[Thu May  2 14:53:07 2013] Removal of ../../acisf12365/products/spectra/fullrun_ccd3_acisf12365_pi14-548_pass1_cl_src2.soff failed
[Thu May  2 14:53:52 2013] Spectrum 2 has only 86 counts, deleting rmf
[Thu May  2 14:53:52 2013] 74.2043
[Thu May  2 15:06:54 2013] Updating aperture counts using extracted products
[Thu May  2 15:06:54 2013] Total counts from fullrun_ccd3_acisf12365_pi14-548_pass1_cl_src2_src.pi.gz = 90.00
[Thu May  2 15:06:54 2013] Total counts from fullrun_ccd3_acisf12365_pi14-548_pass1_cl_src2_bgd.pi.gz = 151.00
[Thu May  2 15:06:54 2013] Got source and background scale factors 0.000109, 0.001292
[Thu May  2 15:06:54 2013] User source parameters:
  Position = (438.7, 106.9) = 20 59 21.19 54 30 35.5
  Extent = 5.9 (4.7-7.3)", rotation angle = 0
  Source aperture counts = 77.2 +/- 10.5
  Background aperture counts = 12.8
  Rate = 0.004 +/- 0.0006

[Thu May  2 15:06:55 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 15:06:55 2013] Using photon index=1.80, rate=0.00473, arf fullrun_ccd3_acisf12365_pi14-548_pass1_cl_src2.arf
[Thu May  2 15:06:55 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May  2 15:06:55 2013] Updating source flux to 1.5e-13
[Thu May  2 15:07:02 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May  2 15:07:03 2013] acisf12365/analysis//spectral/fullrun_ccd3_acisf12365_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete