[Fri Feb 17 07:40:08 2012] Detection parameters:
  Position = (239.9, 425.3) = 3 33 14.77 -25 53 7.6
  Extent = 0.5" x 0.5", rotation angle = 176 degrees
  Source counts = 225.5 +/- 15.1
  Background counts = 2.5
  Rate = 0.01 +/- 0.0008

[Fri Feb 17 07:40:08 2012] Off-axis axis estimate = 1.00'
[Fri Feb 17 08:19:09 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 08:19:09 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Feb 17 08:19:09 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.927
[Fri Feb 17 08:19:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.38"
[Fri Feb 17 08:28:06 2012] fullrun_ccd7_acisf12362_pi14-548_cl_pass0_src1.ximg exists
[Fri Feb 17 08:28:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12362_pi14-548_cl_pass0_src1.csv
[Fri Feb 17 08:28:06 2012] fullrun_ccd7_acisf12362_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Feb 17 08:28:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12362_pi14-548_cl_pass0_src1.csv
[Fri Feb 17 08:28:06 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12362_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12362_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 08:28:06 2012] fullrun_ccd7_acisf12362_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 17 08:28:06 2012] fullrun_ccd7_acisf12362_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 17 08:28:06 2012] Fit fullrun_ccd7_acisf12362_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 17 08:28:10 2012] Spatial fit model total counts = 230.000000, observed total counts = 230.000000
[Fri Feb 17 08:28:10 2012] Offset between fit and detection position for source 2 = 0.708824 pixels
[Fri Feb 17 08:28:10 2012] 230.121400 total counts/ 13.211400 bgd. counts: snr = 59.676749
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.708824 pixels
  Position = (240.4, 425.8) = 3 33 14.77 -25 53 7.6
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 216.9 +/- 15.2
  Background counts = 13.2
  Rate = 0.01 +/- 0.0008
[Fri Feb 17 08:28:10 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 08:28:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 08:28:10 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 08:28:10 2012] Source does appear to be extended
[Fri Feb 17 08:28:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 08:51:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 08:51:02 2012] Initial guess for spatial extent in simple fitting = 0.42"
[Fri Feb 17 08:51:02 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.224
[Fri Feb 17 08:51:02 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.42"
[Fri Feb 17 09:01:20 2012] fullrun_ccd7_acisf12362_pi14-548_cl_pass1_src1.ximg exists
[Fri Feb 17 09:01:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12362_pi14-548_cl_pass1_src1.csv
[Fri Feb 17 09:01:20 2012] fullrun_ccd7_acisf12362_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Feb 17 09:01:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12362_pi14-548_cl_pass1_src1.csv
[Fri Feb 17 09:01:20 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12362_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12362_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 09:01:20 2012] fullrun_ccd7_acisf12362_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 17 09:01:20 2012] fullrun_ccd7_acisf12362_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 17 09:01:20 2012] Fit fullrun_ccd7_acisf12362_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 17 09:01:25 2012] Spatial fit model total counts = 230.000000, observed total counts = 230.000000
[Fri Feb 17 09:01:25 2012] Offset between fit and detection position for source 2 = 0.002671 pixels
[Fri Feb 17 09:01:25 2012] 229.849400 total counts/ 12.847400 bgd. counts: snr = 60.541909
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.002671 pixels
  Position = (240.4, 425.8) = 3 33 14.77 -25 53 7.6
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 217.0 +/- 15.2
  Background counts = 12.8
  Rate = 0.01 +/- 0.0008
[Fri Feb 17 09:01:25 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 09:01:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 09:01:25 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 09:01:25 2012] Source does appear to be extended
[Fri Feb 17 09:01:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 09:07:05 2012] Writing source region out to fullrun_ccd7_acisf12362_pi14-548_pass1_cl_src2_src.reg
[Fri Feb 17 09:07:05 2012] Extracting stamp from image fullrun_ccd7_acisf12362_pi14-548_cl_sm2.00.img.gz, (221, 407) - (259, 445)
[Fri Feb 17 09:07:05 2012] Writing fullrun_ccd7_acisf12362_pi14-548_pass1_cl_src2.gif
[Fri Feb 17 09:07:07 2012] Size of ../../acisf12362/products/events/fullrun_ccd7_acisf12362_pi14-548_pass1_cl_src2_src.evt.gz[events] = 218 counts
[Fri Feb 17 09:07:07 2012] Mean chipx,y = (206.22, 617.76)
[Fri Feb 17 09:07:07 2012] Mean tdetx,y = (4123.22, 2319.76)
[Fri Feb 17 09:07:07 2012] chipx,y range = (189.00-225.00, 600.00-634.00)
[Fri Feb 17 09:07:07 2012] Size of ../../acisf12362/products/events/fullrun_ccd7_acisf12362_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 13 counts
[Fri Feb 17 09:07:08 2012] rmf not found, will run specextract
[Fri Feb 17 09:07:08 2012] arf not found, will run specextract
[Fri Feb 17 09:07:16 2012] ../../acisf12362/products/spectra/fullrun_ccd7_acisf12362_pi14-548_pass1_cl_src2.warf not found
[Fri Feb 17 09:07:16 2012] ../../acisf12362/products/spectra/fullrun_ccd7_acisf12362_pi14-548_pass1_cl_src2.wrmf not found
[Fri Feb 17 09:07:16 2012] Removal of ../../acisf12362/products/spectra/fullrun_ccd7_acisf12362_pi14-548_pass1_cl_src2.soff failed
[Fri Feb 17 09:11:33 2012] Keeping rmf generated by specextract
[Fri Feb 17 09:11:33 2012] 234.06
[Fri Feb 17 09:11:35 2012] Updating aperture counts using extracted products
[Fri Feb 17 09:11:35 2012] Error reading totcts from fullrun_ccd7_acisf12362_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Feb 17 09:11:35 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 09:11:35 2012] Using photon index=1.80, rate=0.011, arf fullrun_ccd7_acisf12362_pi14-548_pass1_cl_src2.arf
[Fri Feb 17 09:11:35 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 09:11:35 2012] Updating source flux to 8.3e-14
[Fri Feb 17 09:11:57 2012] Reading fit data from acisf12362/analysis//spectral/fullrun_ccd7_acisf12362_pi14-548_pass1_cl_src2_pl.csv
[Fri Feb 17 09:11:57 2012] Spectral fit parameter nH value = 1.7103e+14
[Fri Feb 17 09:11:57 2012] Spectral fit parameter PhoIndex value = 1.64762
[Fri Feb 17 09:11:57 2012] Failed to get F(0.3-8.0) from acisf12362/analysis//spectral/fullrun_ccd7_acisf12362_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Feb 17 09:11:57 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 09:11:57 2012] Using Nh = 1.7e+14, photon index=1.65, rate=0.011, arf fullrun_ccd7_acisf12362_pi14-548_pass1_cl_src2.arf
[Fri Feb 17 09:11:57 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 09:11:57 2012] Updating source flux to 8.8e-14