[Fri Feb 17 07:39:45 2012] Detection parameters:
  Position = (426.6, 237.5) = 3 33 45.77 -25 54 57.5
  Extent = 1.6" x 1.1", rotation angle = 41 degrees
  Source counts = 145.3 +/- 12.6
  Background counts = 14.7
  Rate = 0.007 +/- 0.0006

[Fri Feb 17 07:39:45 2012] Off-axis axis estimate = 7.32'
[Fri Feb 17 08:10:56 2012] Using EEF radius (= 2.38 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 08:10:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 08:10:56 2012] Initial guess for spatial extent in simple fitting = 2.38"
[Fri Feb 17 08:10:56 2012] source mask rpix=4.8, npix_max = 113, mask sum = 121, frac = 1.064
[Fri Feb 17 08:10:56 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 2.38"
[Fri Feb 17 08:19:09 2012] fullrun_ccd6_acisf12362_pi14-548_cl_pass0_src1.ximg exists
[Fri Feb 17 08:19:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12362_pi14-548_cl_pass0_src1.csv
[Fri Feb 17 08:19:09 2012] fullrun_ccd6_acisf12362_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Feb 17 08:19:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12362_pi14-548_cl_pass0_src1.csv
[Fri Feb 17 08:19:09 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12362_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12362_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 08:19:09 2012] fullrun_ccd6_acisf12362_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 17 08:19:09 2012] fullrun_ccd6_acisf12362_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 17 08:19:09 2012] Fit fullrun_ccd6_acisf12362_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 17 08:28:09 2012] Spatial fit model total counts = 185.995000, observed total counts = 186.000000
[Fri Feb 17 08:28:09 2012] Offset between fit and detection position for source 10 = 1.154744 pixels
[Fri Feb 17 08:28:09 2012] 186.091640 total counts/ 8.918640 bgd. counts: snr = 59.326431
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.154744 pixels
  Position = (425.5, 237.1) = 3 33 45.83 -25 54 57.9
  Extent = 3.4 (2.9-3.9)", rotation angle = 0
  Source counts = 177.2 +/- 13.6
  Background counts = 8.9
  Rate = 0.009 +/- 0.0007
[Fri Feb 17 08:28:09 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 08:28:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 08:28:09 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 08:28:09 2012] Source does appear to be extended
[Fri Feb 17 08:28:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 08:43:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 08:43:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 08:43:54 2012] Initial guess for spatial extent in simple fitting = 3.35"
[Fri Feb 17 08:43:54 2012] source mask rpix=6.8, npix_max = 214, mask sum = 210, frac = 0.981
[Fri Feb 17 08:43:54 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 3.35"
[Fri Feb 17 08:51:02 2012] fullrun_ccd6_acisf12362_pi14-548_cl_pass1_src1.ximg exists
[Fri Feb 17 08:51:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12362_pi14-548_cl_pass1_src1.csv
[Fri Feb 17 08:51:02 2012] fullrun_ccd6_acisf12362_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Feb 17 08:51:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12362_pi14-548_cl_pass1_src1.csv
[Fri Feb 17 08:51:02 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12362_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12362_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 08:51:02 2012] fullrun_ccd6_acisf12362_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 17 08:51:02 2012] fullrun_ccd6_acisf12362_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 17 08:51:02 2012] Fit fullrun_ccd6_acisf12362_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 17 09:01:23 2012] Spatial fit model total counts = 197.000000, observed total counts = 197.000000
[Fri Feb 17 09:01:23 2012] Offset between fit and detection position for source 10 = 0.080088 pixels
[Fri Feb 17 09:01:23 2012] 197.019000 total counts/ 18.667000 bgd. counts: snr = 41.280098
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.080088 pixels
  Position = (425.6, 237.2) = 3 33 45.83 -25 54 57.9
  Extent = 3.3 (3.0-3.4)", rotation angle = 0
  Source counts = 178.4 +/- 14.0
  Background counts = 18.7
  Rate = 0.009 +/- 0.0007
[Fri Feb 17 09:01:23 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 09:01:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 09:01:23 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 09:01:23 2012] Source does appear to be extended
[Fri Feb 17 09:01:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 09:02:54 2012] Writing source region out to fullrun_ccd6_acisf12362_pi14-548_pass1_cl_src10_src.reg
[Fri Feb 17 09:02:54 2012] Extracting stamp from image fullrun_ccd6_acisf12362_pi14-548_cl_sm2.00.img.gz, (273, 84) - (579, 390)
[Fri Feb 17 09:02:54 2012] Writing fullrun_ccd6_acisf12362_pi14-548_pass1_cl_src10.gif
[Fri Feb 17 09:02:56 2012] Size of ../../acisf12362/products/events/fullrun_ccd6_acisf12362_pi14-548_pass1_cl_src10_src.evt.gz[events] = 193 counts
[Fri Feb 17 09:02:56 2012] Mean chipx,y = (391.58, 811.22)
[Fri Feb 17 09:02:56 2012] Mean tdetx,y = (3266.58, 2513.22)
[Fri Feb 17 09:02:56 2012] chipx,y range = (363.00-417.00, 774.00-846.00)
[Fri Feb 17 09:02:56 2012] Size of ../../acisf12362/products/events/fullrun_ccd6_acisf12362_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 156 counts
[Fri Feb 17 09:02:57 2012] rmf not found, will run specextract
[Fri Feb 17 09:02:57 2012] arf not found, will run specextract
[Fri Feb 17 09:03:36 2012] ../../acisf12362/products/spectra/fullrun_ccd6_acisf12362_pi14-548_pass1_cl_src10.warf not found
[Fri Feb 17 09:03:36 2012] ../../acisf12362/products/spectra/fullrun_ccd6_acisf12362_pi14-548_pass1_cl_src10.wrmf not found
[Fri Feb 17 09:03:36 2012] Removal of ../../acisf12362/products/spectra/fullrun_ccd6_acisf12362_pi14-548_pass1_cl_src10.soff failed
[Fri Feb 17 09:07:05 2012] Keeping rmf generated by specextract
[Fri Feb 17 09:07:05 2012] 155.068
[Fri Feb 17 09:11:35 2012] Updating aperture counts using extracted products
[Fri Feb 17 09:11:35 2012] Error reading totcts from fullrun_ccd6_acisf12362_pi14-548_pass1_cl_src10_src.pi.gz
[Fri Feb 17 09:11:35 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 09:11:35 2012] Using photon index=1.80, rate=0.00908, arf fullrun_ccd6_acisf12362_pi14-548_pass1_cl_src10.arf
[Fri Feb 17 09:11:35 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 09:11:35 2012] Updating source flux to 1.3e-13
[Fri Feb 17 09:11:50 2012] Reading fit data from acisf12362/analysis//spectral/fullrun_ccd6_acisf12362_pi14-548_pass1_cl_src10_pl.csv
[Fri Feb 17 09:11:50 2012] Spectral fit parameter nH value = 5.4809e+20
[Fri Feb 17 09:11:50 2012] Spectral fit parameter PhoIndex value = 1.55945
[Fri Feb 17 09:11:50 2012] Failed to get F(0.3-8.0) from acisf12362/analysis//spectral/fullrun_ccd6_acisf12362_pi14-548_pass1_cl_src10_pl.csv, possibly due to different flux energy range selected
[Fri Feb 17 09:11:50 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 09:11:50 2012] Using Nh = 5.5e+20, photon index=1.56, rate=0.00908, arf fullrun_ccd6_acisf12362_pi14-548_pass1_cl_src10.arf
[Fri Feb 17 09:11:50 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 09:11:50 2012] Updating source flux to 1.4e-13