[Wed Feb 29 01:47:40 2012] Detection parameters:
  Position = (712.1, 1215.5) = 11 15 12.40 -61 16 52.6
  Extent = 0.6" x 0.5", rotation angle = 102 degrees
  Source counts = 32.4 +/- 6.3
  Background counts = 7.6
  Rate = 0.0004 +/- 7e-05

[Wed Feb 29 01:47:48 2012] Off-axis axis estimate = 1.84'
[Wed Feb 29 05:01:41 2012] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Wed Feb 29 05:01:41 2012] Initial guess for spatial extent in simple fitting = 0.41"
[Wed Feb 29 05:01:41 2012] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.831
[Wed Feb 29 05:01:41 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 0.41"
[Wed Feb 29 07:33:39 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src63.ximg exists
[Wed Feb 29 07:33:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src63.csv
[Wed Feb 29 07:33:39 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src63_1.ximg exists
[Wed Feb 29 07:33:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src63.csv
[Wed Feb 29 07:33:39 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 07:33:40 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass0_tfrozen_src63.ximg exists
[Wed Feb 29 07:33:40 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass0_tfrozen_src63_1.ximg exists
[Wed Feb 29 07:33:40 2012] Fit fullrun_ccd3_acisf12330_pi14-548_cl_pass0_tfrozen_src63 appears to have run properly
[Wed Feb 29 08:15:25 2012] Spatial fit model total counts = 78.999900, observed total counts = 79.000000
[Wed Feb 29 08:15:25 2012] Offset between fit and detection position for source 54 = 1.008834 pixels
[Wed Feb 29 08:15:25 2012] 76.906800 total counts/ 47.690400 bgd. counts: snr = 4.230690
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 1.008834 pixels
  Position = (712.8, 1216.2) = 11 15 12.38 -61 16 52.5
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 29.2 +/- 8.8
  Background counts = 47.7
  Rate = 0.0003 +/- 0.0001
[Wed Feb 29 08:15:26 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 08:15:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 08:15:26 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 08:15:26 2012] Source does appear to be extended
[Wed Feb 29 08:15:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 10:57:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 29 10:57:52 2012] Initial guess for spatial extent in simple fitting = 0.47"
[Wed Feb 29 10:57:52 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.057
[Wed Feb 29 10:57:52 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 0.47"
[Wed Feb 29 13:24:22 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass1_src59.ximg exists
[Wed Feb 29 13:24:22 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12330_pi14-548_cl_pass1_src59.csv
[Wed Feb 29 13:24:22 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass1_src59_1.ximg exists
[Wed Feb 29 13:24:22 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12330_pi14-548_cl_pass1_src59.csv
[Wed Feb 29 13:24:22 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12330_pi14-548_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12330_pi14-548_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 13:24:23 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass1_tfrozen_src59.ximg exists
[Wed Feb 29 13:24:23 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass1_tfrozen_src59_1.ximg exists
[Wed Feb 29 13:24:23 2012] Fit fullrun_ccd3_acisf12330_pi14-548_cl_pass1_tfrozen_src59 appears to have run properly
[Wed Feb 29 14:05:52 2012] Spatial fit model total counts = 79.999900, observed total counts = 80.000000
[Wed Feb 29 14:05:52 2012] Offset between fit and detection position for source 54 = 0.032759 pixels
[Wed Feb 29 14:05:52 2012] 61.245200 total counts/ 29.684000 bgd. counts: snr = 5.792850
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 0.032759 pixels
  Position = (712.8, 1216.2) = 11 15 12.38 -61 16 52.5
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 31.6 +/- 7.8
  Background counts = 29.7
  Rate = 0.0004 +/- 9e-05
[Wed Feb 29 14:05:52 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 14:05:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 14:05:52 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 14:05:52 2012] Source does appear to be extended
[Wed Feb 29 14:05:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 15:46:43 2012] Writing source region out to fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src54_src.reg
[Wed Feb 29 15:46:43 2012] Extracting stamp from image fullrun_ccd3_acisf12330_pi14-548_cl_sm2.00.img.gz, (690, 1193) - (736, 1239)
[Wed Feb 29 15:46:43 2012] Writing fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src54.gif
[Wed Feb 29 16:22:05 2012] Size of ../../acisf12330/products/events/fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src54_src.evt.gz[events] = 38 counts
[Wed Feb 29 16:22:05 2012] Mean chipx,y = (896.63, 810.53)
[Wed Feb 29 16:22:05 2012] Mean tdetx,y = (4321.47, 3957.63)
[Wed Feb 29 16:22:05 2012] chipx,y range = (877.00-911.00, 796.00-829.00)
[Wed Feb 29 16:22:05 2012] Size of ../../acisf12330/products/events/fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src54_bgd.evt.gz[events] = 64 counts
[Wed Feb 29 16:22:06 2012] Not generating rmf since there are only 31 counts
[Wed Feb 29 16:22:06 2012] arf not found, will run specextract
[Wed Feb 29 16:22:32 2012] ../../acisf12330/products/spectra/fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src54.warf not found
[Wed Feb 29 16:22:32 2012] ../../acisf12330/products/spectra/fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src54.wrmf not found
[Wed Feb 29 16:22:32 2012] Removal of ../../acisf12330/products/spectra/fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src54.soff failed
[Wed Feb 29 16:40:16 2012] Spectrum 54 has only 32 counts, deleting rmf
[Wed Feb 29 16:40:16 2012] 200.917
[Wed Feb 29 16:41:22 2012] Updating aperture counts using extracted products
[Wed Feb 29 16:41:22 2012] Error reading totcts from fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src54_src.pi.gz
[Wed Feb 29 16:41:23 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 29 16:41:23 2012] Using photon index=1.80, rate=0.000367, arf fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src54.arf
[Wed Feb 29 16:41:23 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 29 16:41:23 2012] Updating source flux to 5.6e-15
[Wed Feb 29 16:41:51 2012] Source 54 has fewer than 100.000000 counts, skipping spectral fitting