[Wed Feb 29 01:47:38 2012] Detection parameters:
  Position = (541.8, 1065.9) = 11 15 24.04 -61 18 6.2
  Extent = 0.6" x 0.5", rotation angle = 110 degrees
  Source counts = 30.5 +/- 5.8
  Background counts = 3.5
  Rate = 0.0004 +/- 7e-05

[Wed Feb 29 01:47:48 2012] Off-axis axis estimate = 3.67'
[Wed Feb 29 05:01:41 2012] Using EEF radius (= 0.74 ")to estimate initial spatial extent for simple fitting
[Wed Feb 29 05:01:41 2012] Initial guess for spatial extent in simple fitting = 0.74"
[Wed Feb 29 05:01:41 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.003
[Wed Feb 29 05:01:41 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 0.74"
[Wed Feb 29 07:33:39 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src71.ximg exists
[Wed Feb 29 07:33:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src71.csv
[Wed Feb 29 07:33:39 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src71_1.ximg exists
[Wed Feb 29 07:33:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src71.csv
[Wed Feb 29 07:33:39 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 07:33:40 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass0_tfrozen_src71.ximg exists
[Wed Feb 29 07:33:40 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass0_tfrozen_src71_1.ximg exists
[Wed Feb 29 07:33:40 2012] Fit fullrun_ccd3_acisf12330_pi14-548_cl_pass0_tfrozen_src71 appears to have run properly
[Wed Feb 29 08:15:25 2012] Spatial fit model total counts = 45.999600, observed total counts = 46.000000
[Wed Feb 29 08:15:25 2012] Offset between fit and detection position for source 23 = 0.924919 pixels
[Wed Feb 29 08:15:25 2012] 45.260400 total counts/ 15.126700 bgd. counts: snr = 7.747835
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.924919 pixels
  Position = (542.3, 1066.7) = 11 15 24.04 -61 18 6.0
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 30.1 +/- 6.7
  Background counts = 15.1
  Rate = 0.0003 +/- 8e-05
[Wed Feb 29 08:15:26 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 08:15:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 08:15:26 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 08:15:26 2012] Source does appear to be extended
[Wed Feb 29 08:15:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 10:57:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 29 10:57:52 2012] Initial guess for spatial extent in simple fitting = 0.60"
[Wed Feb 29 10:57:52 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.754
[Wed Feb 29 10:57:52 2012] Giving source the simple spatial ID 66 for pass 1, mean size = 0.60"
[Wed Feb 29 13:24:22 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass1_src66.ximg exists
[Wed Feb 29 13:24:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12330_pi14-548_cl_pass1_src66.csv
[Wed Feb 29 13:24:22 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass1_src66_1.ximg exists
[Wed Feb 29 13:24:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12330_pi14-548_cl_pass1_src66.csv
[Wed Feb 29 13:24:22 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12330_pi14-548_cl_pass1_src66_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12330_pi14-548_cl_pass1_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 13:24:23 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass1_tfrozen_src66.ximg exists
[Wed Feb 29 13:24:23 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass1_tfrozen_src66_1.ximg exists
[Wed Feb 29 13:24:23 2012] Fit fullrun_ccd3_acisf12330_pi14-548_cl_pass1_tfrozen_src66 appears to have run properly
[Wed Feb 29 14:05:52 2012] Spatial fit model total counts = 43.995100, observed total counts = 44.000000
[Wed Feb 29 14:05:52 2012] Offset between fit and detection position for source 23 = 0.001808 pixels
[Wed Feb 29 14:05:52 2012] 43.223700 total counts/ 13.062000 bgd. counts: snr = 8.345473
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.001808 pixels
  Position = (542.3, 1066.7) = 11 15 24.04 -61 18 6.0
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 30.2 +/- 6.6
  Background counts = 13.1
  Rate = 0.0004 +/- 8e-05
[Wed Feb 29 14:05:52 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 14:05:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 14:05:52 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 14:05:52 2012] Source does appear to be extended
[Wed Feb 29 14:05:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 15:46:43 2012] Writing source region out to fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src23_src.reg
[Wed Feb 29 15:46:43 2012] Extracting stamp from image fullrun_ccd3_acisf12330_pi14-548_cl_sm2.00.img.gz, (515, 1039) - (570, 1094)
[Wed Feb 29 15:46:43 2012] Writing fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src23.gif
[Wed Feb 29 16:27:21 2012] Size of ../../acisf12330/products/events/fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src23_src.evt.gz[events] = 33 counts
[Wed Feb 29 16:27:21 2012] Mean chipx,y = (890.24, 589.30)
[Wed Feb 29 16:27:21 2012] Mean tdetx,y = (4542.70, 3951.24)
[Wed Feb 29 16:27:21 2012] chipx,y range = (874.00-907.00, 569.00-601.00)
[Wed Feb 29 16:27:21 2012] Size of ../../acisf12330/products/events/fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 32 counts
[Wed Feb 29 16:27:23 2012] Not generating rmf since there are only 30 counts
[Wed Feb 29 16:27:23 2012] arf not found, will run specextract
[Wed Feb 29 16:27:46 2012] ../../acisf12330/products/spectra/fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src23.warf not found
[Wed Feb 29 16:27:46 2012] ../../acisf12330/products/spectra/fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src23.wrmf not found
[Wed Feb 29 16:27:46 2012] Removal of ../../acisf12330/products/spectra/fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src23.soff failed
[Wed Feb 29 16:40:16 2012] Spectrum 23 has only 30 counts, deleting rmf
[Wed Feb 29 16:40:16 2012] 195.044
[Wed Feb 29 16:41:22 2012] Updating aperture counts using extracted products
[Wed Feb 29 16:41:22 2012] Error reading totcts from fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src23_src.pi.gz
[Wed Feb 29 16:41:23 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 29 16:41:23 2012] Using photon index=1.80, rate=0.00035, arf fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src23.arf
[Wed Feb 29 16:41:23 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 29 16:41:23 2012] Updating source flux to 5.5e-15
[Wed Feb 29 16:41:51 2012] Source 23 has fewer than 100.000000 counts, skipping spectral fitting