[Wed Feb 29 01:47:48 2012] Detection parameters:
  Position = (986.7, 300.3) = 11 14 53.61 -61 24 22.9
  Extent = 2.2" x 1.5", rotation angle = 26 degrees
  Source counts = 525.6 +/- 24.7
  Background counts = 86.4
  Rate = 0.006 +/- 0.0003

[Wed Feb 29 01:47:48 2012] Off-axis axis estimate = 9.07'
[Wed Feb 29 05:01:40 2012] Using EEF radius (= 3.64 ")to estimate initial spatial extent for simple fitting
[Wed Feb 29 05:01:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 29 05:01:40 2012] Initial guess for spatial extent in simple fitting = 3.64"
[Wed Feb 29 05:01:40 2012] source mask rpix=7.4, npix_max = 249, mask sum = 256, frac = 1.028
[Wed Feb 29 05:01:40 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 3.64"
[Wed Feb 29 07:33:38 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src4.ximg exists
[Wed Feb 29 07:33:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src4.csv
[Wed Feb 29 07:33:38 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src4_1.ximg exists
[Wed Feb 29 07:33:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src4.csv
[Wed Feb 29 07:33:38 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 07:33:39 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Wed Feb 29 07:33:39 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Feb 29 07:33:39 2012] Fit fullrun_ccd3_acisf12330_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Feb 29 08:15:25 2012] Spatial fit model total counts = 609.994000, observed total counts = 610.000000
[Wed Feb 29 08:15:25 2012] Offset between fit and detection position for source 199 = 0.697740 pixels
[Wed Feb 29 08:15:25 2012] 611.454000 total counts/ 138.830000 bgd. counts: snr = 40.111981
Spatial fit parameters:
  Offset between fit and detection position for source 199 = 0.697740 pixels
  Position = (987.3, 300.7) = 11 14 53.61 -61 24 22.9
  Extent = 2.6 (2.3-2.8)", rotation angle = 0
  Source counts = 472.6 +/- 24.7
  Background counts = 138.8
  Rate = 0.005 +/- 0.0003
[Wed Feb 29 08:15:26 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 08:15:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 08:15:26 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 08:15:26 2012] Source does appear to be extended
[Wed Feb 29 08:15:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 10:57:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 29 10:57:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 29 10:57:52 2012] Initial guess for spatial extent in simple fitting = 2.60"
[Wed Feb 29 10:57:52 2012] source mask rpix=5.3, npix_max = 134, mask sum = 144, frac = 1.073
[Wed Feb 29 10:57:52 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 2.60"
[Wed Feb 29 13:24:22 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass1_src4.ximg exists
[Wed Feb 29 13:24:22 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass1_src4_1.ximg exists
[Wed Feb 29 13:24:22 2012] Fit fullrun_ccd3_acisf12330_pi14-548_cl_pass1_src4 appears to have run properly
[Wed Feb 29 13:24:23 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Wed Feb 29 13:24:23 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Feb 29 13:24:23 2012] Fit fullrun_ccd3_acisf12330_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Feb 29 14:05:52 2012] Spatial fit model total counts = 553.001000, observed total counts = 553.000000
[Wed Feb 29 14:05:52 2012] Offset between fit and detection position for source 199 = 0.441408 pixels
[Wed Feb 29 14:05:52 2012] 552.923000 total counts/ 168.078000 bgd. counts: snr = 29.684546
Spatial fit parameters:
  Offset between fit and detection position for source 199 = 0.441408 pixels
  Position = (987.7, 300.7) = 11 14 53.58 -61 24 22.9
  Extent = 2.1 (1.9-2.3)", rotation angle = 0
  Source counts = 384.8 +/- 23.5
  Background counts = 168.1
  Rate = 0.004 +/- 0.0003
[Wed Feb 29 14:05:52 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 14:05:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 14:05:52 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 14:05:52 2012] Source does appear to be extended
[Wed Feb 29 14:05:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 15:46:42 2012] Writing source region out to fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src199_src.reg
[Wed Feb 29 15:46:42 2012] Extracting stamp from image fullrun_ccd3_acisf12330_pi14-548_cl_sm2.00.img.gz, (891, 204) - (1084, 397)
[Wed Feb 29 15:46:42 2012] Writing fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src199.gif
[Wed Feb 29 15:48:41 2012] Size of ../../acisf12330/products/events/fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src199_src.evt.gz[events] = 554 counts
[Wed Feb 29 15:48:41 2012] Mean chipx,y = (20.89, 420.81)
[Wed Feb 29 15:48:41 2012] Mean tdetx,y = (4711.19, 3081.89)
[Wed Feb 29 15:48:41 2012] chipx,y range = (2.00-50.00, 388.00-452.00)
[Wed Feb 29 15:48:41 2012] Size of ../../acisf12330/products/events/fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src199_bgd.evt.gz[events] = 223 counts
[Wed Feb 29 15:48:42 2012] rmf not found, will run specextract
[Wed Feb 29 15:48:42 2012] arf not found, will run specextract
[Wed Feb 29 15:49:05 2012] ../../acisf12330/products/spectra/fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src199.warf not found
[Wed Feb 29 15:49:05 2012] ../../acisf12330/products/spectra/fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src199.wrmf not found
[Wed Feb 29 15:49:05 2012] Removal of ../../acisf12330/products/spectra/fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src199.soff failed
[Wed Feb 29 16:40:15 2012] Keeping rmf generated by specextract
[Wed Feb 29 16:40:15 2012] 159.235
[Wed Feb 29 16:41:21 2012] Updating aperture counts using extracted products
[Wed Feb 29 16:41:21 2012] Error reading totcts from fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src199_src.pi.gz
[Wed Feb 29 16:41:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 29 16:41:22 2012] Using photon index=1.80, rate=0.00447, arf fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src199.arf
[Wed Feb 29 16:41:22 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 29 16:41:22 2012] Updating source flux to 8.3e-14