[Wed Feb 29 01:47:44 2012] Detection parameters:
  Position = (793.4, 1347.3) = 11 15 6.85 -61 15 47.8
  Extent = 0.5" x 0.5", rotation angle = 133 degrees
  Source counts = 52.0 +/- 9.8
  Background counts = 44.0
  Rate = 0.0006 +/- 0.0001

[Wed Feb 29 01:47:48 2012] Off-axis axis estimate = 0.58'
[Wed Feb 29 05:01:40 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Wed Feb 29 05:01:40 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Wed Feb 29 05:01:40 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.351
[Wed Feb 29 05:01:40 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 0.39"
[Wed Feb 29 07:33:39 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src41.ximg exists
[Wed Feb 29 07:33:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src41.csv
[Wed Feb 29 07:33:39 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src41_1.ximg exists
[Wed Feb 29 07:33:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src41.csv
[Wed Feb 29 07:33:39 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 07:33:40 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass0_tfrozen_src41.ximg exists
[Wed Feb 29 07:33:40 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass0_tfrozen_src41_1.ximg exists
[Wed Feb 29 07:33:40 2012] Fit fullrun_ccd3_acisf12330_pi14-548_cl_pass0_tfrozen_src41 appears to have run properly
[Wed Feb 29 08:15:25 2012] Spatial fit model total counts = 557.243000, observed total counts = 554.000000
[Wed Feb 29 08:15:25 2012] Offset between fit and detection position for source 129 = 0.773531 pixels
[Wed Feb 29 08:15:25 2012] 463.204900 total counts/ 433.109000 bgd. counts: snr = 1.446135
Spatial fit parameters:
  Offset between fit and detection position for source 129 = 0.773531 pixels
  Position = (794.1, 1347.5) = 11 15 6.83 -61 15 48.0
  Extent = 0.3 (0.1-0.4)", rotation angle = 0
  Source counts = 30.1 +/- 21.5
  Background counts = 433.1
  Rate = 0.0003 +/- 0.0002
  Deleting source due to low Poisson probability