[Wed Feb 29 01:47:37 2012] Detection parameters:
  Position = (784.7, 1366.4) = 11 15 7.44 -61 15 38.4
  Extent = 0.8" x 0.5", rotation angle = 166 degrees
  Source counts = 12945.9 +/- 116.1
  Background counts = 529.1
  Rate = 0.2 +/- 0.001

[Wed Feb 29 01:47:48 2012] Off-axis axis estimate = 0.54'
[Wed Feb 29 05:01:40 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Wed Feb 29 05:01:40 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Wed Feb 29 05:01:40 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.344
[Wed Feb 29 05:01:40 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.39"
[Wed Feb 29 07:33:38 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src1.ximg exists
[Wed Feb 29 07:33:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src1.csv
[Wed Feb 29 07:33:38 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Feb 29 07:33:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src1.csv
[Wed Feb 29 07:33:38 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12330_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 07:33:39 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Feb 29 07:33:39 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Feb 29 07:33:39 2012] Fit fullrun_ccd3_acisf12330_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Feb 29 08:15:25 2012] Spatial fit model total counts = 14840.200000, observed total counts = 14860.000000
[Wed Feb 29 08:15:25 2012] Offset between fit and detection position for source 1 = 0.790791 pixels
[Wed Feb 29 08:15:25 2012] 14836.250000 total counts/ 704.250000 bgd. counts: snr = 532.525245
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.790791 pixels
  Position = (785.3, 1366.8) = 11 15 7.43 -61 15 38.4
  Extent = 1.2 (1.2-1.2)", rotation angle = 0
  Source counts = 14132.0 +/- 121.8
  Background counts = 704.2
  Rate = 0.2 +/- 0.001
[Wed Feb 29 08:15:26 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 08:15:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 08:15:26 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 08:15:26 2012] Source does appear to be extended
[Wed Feb 29 08:15:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 10:57:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 29 10:57:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 29 10:57:52 2012] Initial guess for spatial extent in simple fitting = 1.15"
[Wed Feb 29 10:57:52 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.111
[Wed Feb 29 10:57:52 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 1.15"
[Wed Feb 29 13:24:22 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass1_src1.ximg exists
[Wed Feb 29 13:24:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12330_pi14-548_cl_pass1_src1.csv
[Wed Feb 29 13:24:22 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Feb 29 13:24:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12330_pi14-548_cl_pass1_src1.csv
[Wed Feb 29 13:24:22 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12330_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12330_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 13:24:23 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Feb 29 13:24:23 2012] fullrun_ccd3_acisf12330_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Feb 29 13:24:23 2012] Fit fullrun_ccd3_acisf12330_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Feb 29 14:05:51 2012] Spatial fit model total counts = 15771.200000, observed total counts = 15810.000000
[Wed Feb 29 14:05:51 2012] Offset between fit and detection position for source 1 = 0.042307 pixels
[Wed Feb 29 14:05:51 2012] 15788.730000 total counts/ 1571.230000 bgd. counts: snr = 358.676857
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.042307 pixels
  Position = (785.4, 1366.8) = 11 15 7.43 -61 15 38.4
  Extent = 1.2 (1.2-1.2)", rotation angle = 0
  Source counts = 14217.5 +/- 125.7
  Background counts = 1571.2
  Rate = 0.2 +/- 0.001
[Wed Feb 29 14:05:52 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 14:05:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 14:05:52 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 14:05:52 2012] Source does appear to be extended
[Wed Feb 29 14:05:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 15:46:41 2012] Writing source region out to fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src1_src.reg
[Wed Feb 29 15:46:41 2012] Extracting stamp from image fullrun_ccd3_acisf12330_pi14-548_cl_sm2.00.img.gz, (729, 1310) - (842, 1423)
[Wed Feb 29 15:46:41 2012] Writing fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src1.gif
[Wed Feb 29 15:46:47 2012] Size of ../../acisf12330/products/events/fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src1_src.evt.gz[events] = 15792 counts
[Wed Feb 29 15:46:47 2012] Mean chipx,y = (960.14, 966.58)
[Wed Feb 29 15:46:47 2012] Mean tdetx,y = (4165.42, 4021.14)
[Wed Feb 29 15:46:47 2012] chipx,y range = (934.00-989.00, 941.00-993.00)
[Wed Feb 29 15:46:47 2012] Size of ../../acisf12330/products/events/fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 1397 counts
[Wed Feb 29 15:46:48 2012] rmf not found, will run specextract
[Wed Feb 29 15:46:48 2012] arf not found, will run specextract
[Wed Feb 29 15:47:18 2012] ../../acisf12330/products/spectra/fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src1.warf not found
[Wed Feb 29 15:47:18 2012] ../../acisf12330/products/spectra/fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src1.wrmf not found
[Wed Feb 29 15:47:18 2012] Removal of ../../acisf12330/products/spectra/fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src1.soff failed
[Wed Feb 29 16:40:15 2012] Keeping rmf generated by specextract
[Wed Feb 29 16:40:15 2012] 202.435
[Wed Feb 29 16:41:21 2012] Updating aperture counts using extracted products
[Wed Feb 29 16:41:21 2012] Error reading totcts from fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Feb 29 16:41:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 29 16:41:22 2012] Using photon index=1.80, rate=0.165, arf fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src1.arf
[Wed Feb 29 16:41:22 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 29 16:41:22 2012] Updating source flux to 2.5e-12
[Wed Feb 29 16:42:50 2012] Reading fit data from acisf12330/analysis//spectral/fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src1_pl.csv
[Wed Feb 29 16:42:50 2012] Spectral fit parameter nH value = 7.77186e+21
[Wed Feb 29 16:42:50 2012] Spectral fit parameter PhoIndex value = 2.48019
[Wed Feb 29 16:42:50 2012] Failed to get F(0.3-8.0) from acisf12330/analysis//spectral/fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Feb 29 16:42:50 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 29 16:42:50 2012] Using Nh = 7.8e+21, photon index=2.48, rate=0.165, arf fullrun_ccd3_acisf12330_pi14-548_pass1_cl_src1.arf
[Wed Feb 29 16:42:50 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 29 16:42:50 2012] Updating source flux to 1.7e-12