[Wed Feb 29 01:47:33 2012] Detection parameters:
  Position = (404.3, 401.9) = 11 14 39.27 -61 17 53.3
  Extent = 1.2" x 0.5", rotation angle = 43 degrees
  Source counts = 17.4 +/- 4.5
  Background counts = 2.6
  Rate = 0.0002 +/- 5e-05

[Wed Feb 29 01:47:35 2012] Off-axis axis estimate = 3.83'
[Wed Feb 29 03:52:53 2012] Using EEF radius (= 0.78 ")to estimate initial spatial extent for simple fitting
[Wed Feb 29 03:52:53 2012] Initial guess for spatial extent in simple fitting = 0.78"
[Wed Feb 29 03:52:53 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.917
[Wed Feb 29 03:52:53 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 0.78"
[Wed Feb 29 05:01:40 2012] fullrun_ccd2_acisf12330_pi14-548_cl_pass0_src34.ximg exists
[Wed Feb 29 05:01:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12330_pi14-548_cl_pass0_src34.csv
[Wed Feb 29 05:01:40 2012] fullrun_ccd2_acisf12330_pi14-548_cl_pass0_src34_1.ximg exists
[Wed Feb 29 05:01:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12330_pi14-548_cl_pass0_src34.csv
[Wed Feb 29 05:01:40 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12330_pi14-548_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12330_pi14-548_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 05:01:40 2012] fullrun_ccd2_acisf12330_pi14-548_cl_pass0_tfrozen_src34.ximg exists
[Wed Feb 29 05:01:40 2012] fullrun_ccd2_acisf12330_pi14-548_cl_pass0_tfrozen_src34_1.ximg exists
[Wed Feb 29 05:01:40 2012] Fit fullrun_ccd2_acisf12330_pi14-548_cl_pass0_tfrozen_src34 appears to have run properly
[Wed Feb 29 08:15:12 2012] Source 36 is offset by -6.055114 and -7.504821 pixels which is larger than
2 X fitted extent = 0.794366 x 0.794366, not incorporating fit results
[Wed Feb 29 08:15:12 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 08:15:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 08:15:12 2012] Assessing source extent using major
[Wed Feb 29 08:15:12 2012] Source does appear to be extended
[Wed Feb 29 08:15:12 2012] Computing asymmetry using major and minor axis, asym = 2.45
[Wed Feb 29 08:15:12 2012] Source is asymmetric
[Wed Feb 29 10:03:46 2012] Using EEF radius (= 0.78 ")to estimate initial spatial extent for simple fitting
[Wed Feb 29 10:03:46 2012] Initial guess for spatial extent in simple fitting = 0.78"
[Wed Feb 29 10:03:46 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.917
[Wed Feb 29 10:03:46 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 0.78"
[Wed Feb 29 10:57:52 2012] fullrun_ccd2_acisf12330_pi14-548_cl_pass1_src33.ximg exists
[Wed Feb 29 10:57:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12330_pi14-548_cl_pass1_src33.csv
[Wed Feb 29 10:57:52 2012] fullrun_ccd2_acisf12330_pi14-548_cl_pass1_src33_1.ximg exists
[Wed Feb 29 10:57:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12330_pi14-548_cl_pass1_src33.csv
[Wed Feb 29 10:57:52 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12330_pi14-548_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12330_pi14-548_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 10:57:52 2012] fullrun_ccd2_acisf12330_pi14-548_cl_pass1_tfrozen_src33.ximg exists
[Wed Feb 29 10:57:52 2012] fullrun_ccd2_acisf12330_pi14-548_cl_pass1_tfrozen_src33_1.ximg exists
[Wed Feb 29 10:57:52 2012] Fit fullrun_ccd2_acisf12330_pi14-548_cl_pass1_tfrozen_src33 appears to have run properly
[Wed Feb 29 14:05:39 2012] Spatial fit model total counts = 26.856600, observed total counts = 27.000000
[Wed Feb 29 14:05:39 2012] Offset between fit and detection position for source 36 = 0.328939 pixels
[Wed Feb 29 14:05:39 2012] 27.314000 total counts/ 15.534000 bgd. counts: snr = 2.988847
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.328939 pixels
  Position = (404.0, 402.0) = 11 14 39.32 -61 17 53.5
  Extent = 0.8 (0.4-1.6)", rotation angle = 0
  Source counts = 11.8 +/- 5.2
  Background counts = 15.5
  Rate = 0.0001 +/- 6e-05
[Wed Feb 29 14:05:39 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 14:05:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 14:05:39 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 14:05:39 2012] Source does appear to be extended
[Wed Feb 29 14:05:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 15:15:54 2012] Writing source region out to fullrun_ccd2_acisf12330_pi14-548_pass1_cl_src36_src.reg
[Wed Feb 29 15:15:54 2012] Extracting stamp from image fullrun_ccd2_acisf12330_pi14-548_cl_sm2.00.img.gz, (369, 367) - (439, 437)
[Wed Feb 29 15:15:54 2012] Writing fullrun_ccd2_acisf12330_pi14-548_pass1_cl_src36.gif
[Wed Feb 29 15:35:29 2012] Size of ../../acisf12330/products/events/fullrun_ccd2_acisf12330_pi14-548_pass1_cl_src36_src.evt.gz[events] = 21 counts
[Wed Feb 29 15:35:29 2012] Mean chipx,y = (536.43, 974.67)
[Wed Feb 29 15:35:29 2012] Mean tdetx,y = (4035.67, 3549.57)
[Wed Feb 29 15:35:29 2012] chipx,y range = (523.00-556.00, 955.00-991.00)
[Wed Feb 29 15:35:29 2012] Size of ../../acisf12330/products/events/fullrun_ccd2_acisf12330_pi14-548_pass1_cl_src36_bgd.evt.gz[events] = 41 counts
[Wed Feb 29 15:35:30 2012] Not generating rmf since there are only 11 counts
[Wed Feb 29 15:35:30 2012] arf not found, will run specextract
[Wed Feb 29 15:36:08 2012] ../../acisf12330/products/spectra/fullrun_ccd2_acisf12330_pi14-548_pass1_cl_src36.warf not found
[Wed Feb 29 15:36:08 2012] ../../acisf12330/products/spectra/fullrun_ccd2_acisf12330_pi14-548_pass1_cl_src36.wrmf not found
[Wed Feb 29 15:36:08 2012] Removal of ../../acisf12330/products/spectra/fullrun_ccd2_acisf12330_pi14-548_pass1_cl_src36.soff failed
[Wed Feb 29 15:46:41 2012] Spectrum 36 has only 12 counts, deleting rmf
[Wed Feb 29 15:46:41 2012] 148.088
[Wed Feb 29 16:41:20 2012] Updating aperture counts using extracted products
[Wed Feb 29 16:41:20 2012] Error reading totcts from fullrun_ccd2_acisf12330_pi14-548_pass1_cl_src36_src.pi.gz
[Wed Feb 29 16:41:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 29 16:41:21 2012] Using photon index=1.80, rate=0.000137, arf fullrun_ccd2_acisf12330_pi14-548_pass1_cl_src36.arf
[Wed Feb 29 16:41:21 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 29 16:41:21 2012] Updating source flux to 2.8e-15
[Wed Feb 29 16:41:41 2012] Flag b found in src. 36 procflags, skipping spectral fitting
[Wed Feb 29 16:41:41 2012] Source 36 has fewer than 100.000000 counts, skipping spectral fitting