[Wed Feb 29 01:47:24 2012] Detection parameters:
  Position = (505.4, 229.9) = 11 15 17.95 -61 12 54.8
  Extent = 0.7" x 0.5", rotation angle = 129 degrees
  Source counts = 25.1 +/- 5.3
  Background counts = 2.9
  Rate = 0.0003 +/- 6e-05

[Wed Feb 29 01:47:25 2012] Off-axis axis estimate = 3.03'
[Wed Feb 29 01:53:06 2012] Using EEF radius (= 0.59 ")to estimate initial spatial extent for simple fitting
[Wed Feb 29 01:53:06 2012] Initial guess for spatial extent in simple fitting = 0.59"
[Wed Feb 29 01:53:06 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.050
[Wed Feb 29 01:53:06 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 0.59"
[Wed Feb 29 02:48:07 2012] fullrun_ccd0_acisf12330_pi14-548_cl_pass0_src25.ximg exists
[Wed Feb 29 02:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12330_pi14-548_cl_pass0_src25.csv
[Wed Feb 29 02:48:07 2012] fullrun_ccd0_acisf12330_pi14-548_cl_pass0_src25_1.ximg exists
[Wed Feb 29 02:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12330_pi14-548_cl_pass0_src25.csv
[Wed Feb 29 02:48:07 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12330_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12330_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 02:48:08 2012] fullrun_ccd0_acisf12330_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Wed Feb 29 02:48:08 2012] fullrun_ccd0_acisf12330_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Wed Feb 29 02:48:08 2012] Fit fullrun_ccd0_acisf12330_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Wed Feb 29 08:14:58 2012] Spatial fit model total counts = 41.867000, observed total counts = 43.000000
[Wed Feb 29 08:14:58 2012] Offset between fit and detection position for source 27 = 0.819163 pixels
[Wed Feb 29 08:14:58 2012] 42.179500 total counts/ 16.802400 bgd. counts: snr = 6.190936
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.819163 pixels
  Position = (505.9, 230.5) = 11 15 17.94 -61 12 54.7
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source counts = 25.4 +/- 6.5
  Background counts = 16.8
  Rate = 0.0003 +/- 8e-05
[Wed Feb 29 08:14:58 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 08:14:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 08:14:58 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 08:14:58 2012] Source does appear to be extended
[Wed Feb 29 08:14:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 08:15:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 29 08:15:55 2012] Initial guess for spatial extent in simple fitting = 0.65"
[Wed Feb 29 08:15:55 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.907
[Wed Feb 29 08:15:55 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 0.65"
[Wed Feb 29 09:06:14 2012] fullrun_ccd0_acisf12330_pi14-548_cl_pass1_src25.ximg exists
[Wed Feb 29 09:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12330_pi14-548_cl_pass1_src25.csv
[Wed Feb 29 09:06:14 2012] fullrun_ccd0_acisf12330_pi14-548_cl_pass1_src25_1.ximg exists
[Wed Feb 29 09:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12330_pi14-548_cl_pass1_src25.csv
[Wed Feb 29 09:06:14 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12330_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12330_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 09:06:14 2012] fullrun_ccd0_acisf12330_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Wed Feb 29 09:06:14 2012] fullrun_ccd0_acisf12330_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Wed Feb 29 09:06:14 2012] Fit fullrun_ccd0_acisf12330_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Wed Feb 29 14:05:26 2012] Spatial fit model total counts = 42.441000, observed total counts = 43.000000
[Wed Feb 29 14:05:26 2012] Offset between fit and detection position for source 27 = 0.016917 pixels
[Wed Feb 29 14:05:26 2012] 42.763500 total counts/ 17.308100 bgd. counts: snr = 6.118645
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.016917 pixels
  Position = (505.9, 230.5) = 11 15 17.94 -61 12 54.7
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source counts = 25.5 +/- 6.5
  Background counts = 17.3
  Rate = 0.0003 +/- 8e-05
[Wed Feb 29 14:05:26 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 14:05:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 14:05:26 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 14:05:26 2012] Source does appear to be extended
[Wed Feb 29 14:05:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 14:06:20 2012] Writing source region out to fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src27_src.reg
[Wed Feb 29 14:06:20 2012] Extracting stamp from image fullrun_ccd0_acisf12330_pi14-548_cl_sm2.00.img.gz, (477, 202) - (535, 259)
[Wed Feb 29 14:06:20 2012] Writing fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src27.gif
[Wed Feb 29 14:20:13 2012] Size of ../../acisf12330/products/events/fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src27_src.evt.gz[events] = 32 counts
[Wed Feb 29 14:20:13 2012] Mean chipx,y = (756.12, 1005.00)
[Wed Feb 29 14:20:13 2012] Mean tdetx,y = (4066.00, 4375.88)
[Wed Feb 29 14:20:13 2012] chipx,y range = (737.00-774.00, 988.00-1022.00)
[Wed Feb 29 14:20:13 2012] Size of ../../acisf12330/products/events/fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 42 counts
[Wed Feb 29 14:20:14 2012] Not generating rmf since there are only 25 counts
[Wed Feb 29 14:20:14 2012] arf not found, will run specextract
[Wed Feb 29 14:20:50 2012] ../../acisf12330/products/spectra/fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src27.warf not found
[Wed Feb 29 14:20:50 2012] ../../acisf12330/products/spectra/fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src27.wrmf not found
[Wed Feb 29 14:20:50 2012] Removal of ../../acisf12330/products/spectra/fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src27.soff failed
[Wed Feb 29 14:36:18 2012] Spectrum 27 has only 25 counts, deleting rmf
[Wed Feb 29 14:36:18 2012] 185.587
[Wed Feb 29 16:41:17 2012] Updating aperture counts using extracted products
[Wed Feb 29 16:41:17 2012] Error reading totcts from fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src27_src.pi.gz
[Wed Feb 29 16:41:18 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 29 16:41:18 2012] Using photon index=1.80, rate=0.000296, arf fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src27.arf
[Wed Feb 29 16:41:18 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 29 16:41:18 2012] Updating source flux to 4.9e-15
[Wed Feb 29 16:41:29 2012] Source 27 has fewer than 100.000000 counts, skipping spectral fitting