[Wed Feb 29 01:47:23 2012] Detection parameters:
  Position = (716.0, 99.6) = 11 15 3.60 -61 13 58.9
  Extent = 0.7" x 0.6", rotation angle = 31 degrees
  Source counts = 16.4 +/- 4.7
  Background counts = 5.6
  Rate = 0.0002 +/- 5e-05

[Wed Feb 29 01:47:25 2012] Off-axis axis estimate = 1.41'
[Wed Feb 29 01:53:06 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Wed Feb 29 01:53:06 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Wed Feb 29 01:53:06 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.903
[Wed Feb 29 01:53:06 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 0.39"
[Wed Feb 29 02:48:07 2012] fullrun_ccd0_acisf12330_pi14-548_cl_pass0_src18.ximg exists
[Wed Feb 29 02:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12330_pi14-548_cl_pass0_src18.csv
[Wed Feb 29 02:48:07 2012] fullrun_ccd0_acisf12330_pi14-548_cl_pass0_src18_1.ximg exists
[Wed Feb 29 02:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12330_pi14-548_cl_pass0_src18.csv
[Wed Feb 29 02:48:07 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12330_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12330_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 02:48:08 2012] fullrun_ccd0_acisf12330_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Wed Feb 29 02:48:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12330_pi14-548_cl_pass0_tfrozen_src18.csv
[Wed Feb 29 02:48:08 2012] fullrun_ccd0_acisf12330_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Feb 29 02:48:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12330_pi14-548_cl_pass0_tfrozen_src18.csv
[Wed Feb 29 02:48:08 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12330_pi14-548_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12330_pi14-548_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 08:14:58 2012] Spatial fit model total counts = 24.583000, observed total counts = 27.000000
[Wed Feb 29 08:14:58 2012] Offset between fit and detection position for source 18 = 0.276369 pixels
[Wed Feb 29 08:14:58 2012] 24.986275 total counts/ 0.558675 bgd. counts: snr = 32.681440
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.276369 pixels
  Position = (716.2, 99.7) = 11 15 3.62 -61 13 59.1
  Extent = 1.0 (0.5-1.2)", rotation angle = 0
  Source counts = 24.4 +/- 5.0
  Background counts = 0.6
  Rate = 0.0003 +/- 6e-05
[Wed Feb 29 08:14:58 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 08:14:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 08:14:58 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 08:14:58 2012] Source does appear to be extended
[Wed Feb 29 08:14:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 08:15:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 29 08:15:55 2012] Initial guess for spatial extent in simple fitting = 1.00"
[Wed Feb 29 08:15:55 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.974
[Wed Feb 29 08:15:55 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 1.00"
[Wed Feb 29 09:06:14 2012] fullrun_ccd0_acisf12330_pi14-548_cl_pass1_src18.ximg exists
[Wed Feb 29 09:06:14 2012] fullrun_ccd0_acisf12330_pi14-548_cl_pass1_src18_1.ximg exists
[Wed Feb 29 09:06:14 2012] Fit fullrun_ccd0_acisf12330_pi14-548_cl_pass1_src18 appears to have run properly
[Wed Feb 29 09:06:14 2012] fullrun_ccd0_acisf12330_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Wed Feb 29 09:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12330_pi14-548_cl_pass1_tfrozen_src18.csv
[Wed Feb 29 09:06:14 2012] fullrun_ccd0_acisf12330_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Wed Feb 29 09:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12330_pi14-548_cl_pass1_tfrozen_src18.csv
[Wed Feb 29 09:06:14 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12330_pi14-548_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12330_pi14-548_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 14:05:26 2012] Spatial fit model total counts = 24.806000, observed total counts = 27.000000
[Wed Feb 29 14:05:26 2012] Offset between fit and detection position for source 18 = 0.056552 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.056552 pixels
  Position = (716.2, 99.7) = 11 15 3.62 -61 13 59.1
  Extent = 1.0 (0.6-1.2)", rotation angle = 0
  Source counts = 25.3 +/- 5.0
  Background counts = 0.0
  Rate = 0.0003 +/- 6e-05
[Wed Feb 29 14:05:26 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 14:05:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 14:05:26 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 14:05:26 2012] Source does appear to be extended
[Wed Feb 29 14:05:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 14:06:20 2012] Writing source region out to fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src18_src.reg
[Wed Feb 29 14:06:20 2012] Extracting stamp from image fullrun_ccd0_acisf12330_pi14-548_cl_sm2.00.img.gz, (670, 53) - (762, 146)
[Wed Feb 29 14:06:20 2012] Writing fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src18.gif
[Wed Feb 29 14:15:47 2012] Size of ../../acisf12330/products/events/fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src18_src.evt.gz[events] = 26 counts
[Wed Feb 29 14:15:47 2012] Mean chipx,y = (991.27, 933.46)
[Wed Feb 29 14:15:47 2012] Mean tdetx,y = (3994.46, 4140.73)
[Wed Feb 29 14:15:47 2012] chipx,y range = (977.00-1007.00, 914.00-948.00)
[Wed Feb 29 14:15:47 2012] Size of ../../acisf12330/products/events/fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 156 counts
[Wed Feb 29 14:15:48 2012] Not generating rmf since there are only 25 counts
[Wed Feb 29 14:15:48 2012] arf not found, will run specextract
[Wed Feb 29 14:16:14 2012] ../../acisf12330/products/spectra/fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src18.warf not found
[Wed Feb 29 14:16:14 2012] ../../acisf12330/products/spectra/fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src18.wrmf not found
[Wed Feb 29 14:16:14 2012] Removal of ../../acisf12330/products/spectra/fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src18.soff failed
[Wed Feb 29 14:36:18 2012] Spectrum 18 has only 25 counts, deleting rmf
[Wed Feb 29 14:36:18 2012] 171.557
[Wed Feb 29 16:41:17 2012] Updating aperture counts using extracted products
[Wed Feb 29 16:41:17 2012] Error reading totcts from fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src18_src.pi.gz
[Wed Feb 29 16:41:18 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 29 16:41:18 2012] Using photon index=1.80, rate=0.000294, arf fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src18.arf
[Wed Feb 29 16:41:18 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 29 16:41:18 2012] Updating source flux to 5.3e-15
[Wed Feb 29 16:41:29 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting