[Wed Feb 29 01:47:23 2012] Detection parameters:
  Position = (922.4, 359.5) = 11 14 49.55 -61 11 51.0
  Extent = 0.5" x 0.5", rotation angle = 156 degrees
  Source counts = 41.0 +/- 6.6
  Background counts = 2.0
  Rate = 0.0005 +/- 8e-05

[Wed Feb 29 01:47:25 2012] Off-axis axis estimate = 3.92'
[Wed Feb 29 01:53:06 2012] Using EEF radius (= 0.80 ")to estimate initial spatial extent for simple fitting
[Wed Feb 29 01:53:06 2012] Initial guess for spatial extent in simple fitting = 0.80"
[Wed Feb 29 01:53:06 2012] source mask rpix=1.6, npix_max = 18, mask sum = 22, frac = 1.205
[Wed Feb 29 01:53:06 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 0.80"
[Wed Feb 29 02:48:07 2012] fullrun_ccd0_acisf12330_pi14-548_cl_pass0_src12.ximg exists
[Wed Feb 29 02:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12330_pi14-548_cl_pass0_src12.csv
[Wed Feb 29 02:48:07 2012] fullrun_ccd0_acisf12330_pi14-548_cl_pass0_src12_1.ximg exists
[Wed Feb 29 02:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12330_pi14-548_cl_pass0_src12.csv
[Wed Feb 29 02:48:07 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12330_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12330_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 02:48:07 2012] fullrun_ccd0_acisf12330_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Wed Feb 29 02:48:07 2012] fullrun_ccd0_acisf12330_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Feb 29 02:48:07 2012] Fit fullrun_ccd0_acisf12330_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Wed Feb 29 08:14:58 2012] Spatial fit model total counts = 64.468300, observed total counts = 57.000000
[Wed Feb 29 08:14:58 2012] Offset between fit and detection position for source 12 = 1.192782 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 1.192782 pixels
  Position = (923.0, 360.5) = 11 14 49.54 -61 11 50.8
  Extent = 1.2" x 0.8", rotation angle = 81
  Source counts = 62.9 +/- 7.9
  Background counts = 0.0
  Rate = 0.0007 +/- 9e-05
[Wed Feb 29 08:14:58 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 08:14:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 08:14:58 2012] Assessing source extent using major
[Wed Feb 29 08:14:58 2012] Source does appear to be extended
[Wed Feb 29 08:14:58 2012] Computing asymmetry using major and minor axis, asym = 1.62
[Wed Feb 29 08:14:58 2012] Source is asymmetric
[Wed Feb 29 08:15:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 29 08:15:55 2012] Initial guess for spatial extent in simple fitting = 1.00"
[Wed Feb 29 08:15:55 2012] source mask rpix=2.0, npix_max = 25, mask sum = 22, frac = 0.852
[Wed Feb 29 08:15:55 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 1.00"
[Wed Feb 29 09:06:14 2012] fullrun_ccd0_acisf12330_pi14-548_cl_pass1_src12.ximg exists
[Wed Feb 29 09:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12330_pi14-548_cl_pass1_src12.csv
[Wed Feb 29 09:06:14 2012] fullrun_ccd0_acisf12330_pi14-548_cl_pass1_src12_1.ximg exists
[Wed Feb 29 09:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12330_pi14-548_cl_pass1_src12.csv
[Wed Feb 29 09:06:14 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12330_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12330_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 09:06:14 2012] fullrun_ccd0_acisf12330_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Wed Feb 29 09:06:14 2012] fullrun_ccd0_acisf12330_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Wed Feb 29 09:06:14 2012] Fit fullrun_ccd0_acisf12330_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Wed Feb 29 14:05:26 2012] Spatial fit model total counts = 53.867600, observed total counts = 56.000000
[Wed Feb 29 14:05:26 2012] Offset between fit and detection position for source 12 = 0.128308 pixels
[Wed Feb 29 14:05:26 2012] 52.389987 total counts/ 0.278287 bgd. counts: snr = 98.784494
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.128308 pixels
  Position = (923.0, 360.6) = 11 14 49.54 -61 11 50.7
  Extent = 0.9 (0.7-1.0)", rotation angle = 0
  Source counts = 52.1 +/- 7.2
  Background counts = 0.3
  Rate = 0.0006 +/- 8e-05
[Wed Feb 29 14:05:26 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 14:05:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 14:05:26 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 14:05:26 2012] Source does appear to be extended
[Wed Feb 29 14:05:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 14:06:20 2012] Writing source region out to fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src12_src.reg
[Wed Feb 29 14:06:20 2012] Extracting stamp from image fullrun_ccd0_acisf12330_pi14-548_cl_sm2.00.img.gz, (882, 319) - (965, 402)
[Wed Feb 29 14:06:20 2012] Writing fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src12.gif
[Wed Feb 29 14:12:32 2012] Size of ../../acisf12330/products/events/fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src12_src.evt.gz[events] = 53 counts
[Wed Feb 29 14:12:32 2012] Mean chipx,y = (932.45, 603.25)
[Wed Feb 29 14:12:32 2012] Mean tdetx,y = (3664.25, 4199.55)
[Wed Feb 29 14:12:32 2012] chipx,y range = (914.00-949.00, 586.00-623.00)
[Wed Feb 29 14:12:32 2012] Size of ../../acisf12330/products/events/fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 65 counts
[Wed Feb 29 14:12:33 2012] Not generating rmf since there are only 52 counts
[Wed Feb 29 14:12:33 2012] arf not found, will run specextract
[Wed Feb 29 14:13:01 2012] ../../acisf12330/products/spectra/fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src12.warf not found
[Wed Feb 29 14:13:01 2012] ../../acisf12330/products/spectra/fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src12.wrmf not found
[Wed Feb 29 14:13:01 2012] Removal of ../../acisf12330/products/spectra/fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src12.soff failed
[Wed Feb 29 14:36:18 2012] Spectrum 12 has only 52 counts, deleting rmf
[Wed Feb 29 14:36:18 2012] 182.568
[Wed Feb 29 16:41:17 2012] Updating aperture counts using extracted products
[Wed Feb 29 16:41:17 2012] Error reading totcts from fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src12_src.pi.gz
[Wed Feb 29 16:41:18 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 29 16:41:18 2012] Using photon index=1.80, rate=0.000605, arf fullrun_ccd0_acisf12330_pi14-548_pass1_cl_src12.arf
[Wed Feb 29 16:41:18 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 29 16:41:18 2012] Updating source flux to 1e-14
[Wed Feb 29 16:41:29 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting