[Wed Feb 22 14:01:36 2012] Detection parameters:
  Position = (744.9, 1213.6) = 11 15 11.65 -61 16 43.8
  Extent = 0.6" x 0.5", rotation angle = 168 degrees
  Source counts = 62.7 +/- 8.7
  Background counts = 12.3
  Rate = 0.0004 +/- 6e-05

[Wed Feb 22 14:01:46 2012] Off-axis axis estimate = 1.65'
[Wed Feb 22 19:31:26 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 19:31:26 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Wed Feb 22 19:31:26 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.867
[Wed Feb 22 19:31:26 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 0.40"
[Wed Feb 22 22:05:45 2012] fullrun_ccd3_acisf12329_pi14-548_cl_pass0_src52.ximg exists
[Wed Feb 22 22:05:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12329_pi14-548_cl_pass0_src52.csv
[Wed Feb 22 22:05:45 2012] fullrun_ccd3_acisf12329_pi14-548_cl_pass0_src52_1.ximg exists
[Wed Feb 22 22:05:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12329_pi14-548_cl_pass0_src52.csv
[Wed Feb 22 22:05:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12329_pi14-548_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12329_pi14-548_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 22:05:46 2012] fullrun_ccd3_acisf12329_pi14-548_cl_pass0_tfrozen_src52.ximg exists
[Wed Feb 22 22:05:46 2012] fullrun_ccd3_acisf12329_pi14-548_cl_pass0_tfrozen_src52_1.ximg exists
[Wed Feb 22 22:05:46 2012] Fit fullrun_ccd3_acisf12329_pi14-548_cl_pass0_tfrozen_src52 appears to have run properly
[Wed Feb 22 22:22:12 2012] Source 99 is offset by -0.033919 and -4.640025 pixels which is larger than
2 X fitted extent = 4.599553 x 4.599553, not incorporating fit results
[Wed Feb 22 22:22:13 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 22:22:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 22:22:13 2012] Assessing source extent using major
[Wed Feb 22 22:22:13 2012] Source does appear to be extended
[Wed Feb 22 22:22:13 2012] Computing asymmetry using major and minor axis, asym = 1.31
[Thu Feb 23 03:14:59 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 03:14:59 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Thu Feb 23 03:14:59 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.867
[Thu Feb 23 03:14:59 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 0.40"
[Thu Feb 23 06:29:26 2012] fullrun_ccd3_acisf12329_pi14-548_cl_pass1_src51.ximg exists
[Thu Feb 23 06:29:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12329_pi14-548_cl_pass1_src51.csv
[Thu Feb 23 06:29:26 2012] fullrun_ccd3_acisf12329_pi14-548_cl_pass1_src51_1.ximg exists
[Thu Feb 23 06:29:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12329_pi14-548_cl_pass1_src51.csv
[Thu Feb 23 06:29:26 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12329_pi14-548_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12329_pi14-548_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 06:29:27 2012] fullrun_ccd3_acisf12329_pi14-548_cl_pass1_tfrozen_src51.ximg exists
[Thu Feb 23 06:29:27 2012] fullrun_ccd3_acisf12329_pi14-548_cl_pass1_tfrozen_src51_1.ximg exists
[Thu Feb 23 06:29:27 2012] Fit fullrun_ccd3_acisf12329_pi14-548_cl_pass1_tfrozen_src51 appears to have run properly
[Thu Feb 23 06:48:56 2012] Spatial fit model total counts = 271.015000, observed total counts = 277.000000
[Thu Feb 23 06:48:56 2012] Offset between fit and detection position for source 99 = 0.858301 pixels
[Thu Feb 23 06:48:56 2012] 294.312300 total counts/ 253.214000 bgd. counts: snr = 2.582736
Spatial fit parameters:
  Offset between fit and detection position for source 99 = 0.858301 pixels
  Position = (745.3, 1214.4) = 11 15 11.65 -61 16 43.7
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 41.1 +/- 17.2
  Background counts = 253.2
  Rate = 0.0003 +/- 0.0001
[Thu Feb 23 06:48:56 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 06:48:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 06:48:56 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 06:48:56 2012] Source does appear to be extended
[Thu Feb 23 06:48:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 09:38:34 2012] Writing source region out to fullrun_ccd3_acisf12329_pi14-548_pass1_cl_src99_src.reg
[Thu Feb 23 09:38:34 2012] Extracting stamp from image fullrun_ccd3_acisf12329_pi14-548_cl_sm2.00.img.gz, (726, 1195) - (765, 1234)
[Thu Feb 23 09:38:34 2012] Writing fullrun_ccd3_acisf12329_pi14-548_pass1_cl_src99.gif
[Thu Feb 23 10:09:38 2012] Size of ../../acisf12329/products/events/fullrun_ccd3_acisf12329_pi14-548_pass1_cl_src99_src.evt.gz[events] = 66 counts
[Thu Feb 23 10:09:38 2012] Mean chipx,y = (892.55, 836.12)
[Thu Feb 23 10:09:38 2012] Mean tdetx,y = (4295.88, 3953.55)
[Thu Feb 23 10:09:38 2012] chipx,y range = (874.00-910.00, 818.00-853.00)
[Thu Feb 23 10:09:38 2012] Size of ../../acisf12329/products/events/fullrun_ccd3_acisf12329_pi14-548_pass1_cl_src99_bgd.evt.gz[events] = 34 counts
[Thu Feb 23 10:09:39 2012] Not generating rmf since there are only 41 counts
[Thu Feb 23 10:09:39 2012] arf not found, will run specextract
[Thu Feb 23 10:10:12 2012] ../../acisf12329/products/spectra/fullrun_ccd3_acisf12329_pi14-548_pass1_cl_src99.warf not found
[Thu Feb 23 10:10:12 2012] ../../acisf12329/products/spectra/fullrun_ccd3_acisf12329_pi14-548_pass1_cl_src99.wrmf not found
[Thu Feb 23 10:10:12 2012] Removal of ../../acisf12329/products/spectra/fullrun_ccd3_acisf12329_pi14-548_pass1_cl_src99.soff failed
[Thu Feb 23 10:31:52 2012] Spectrum 99 has only 41 counts, deleting rmf
[Thu Feb 23 10:31:52 2012] 200.98
[Thu Feb 23 10:32:45 2012] Updating aperture counts using extracted products
[Thu Feb 23 10:32:45 2012] Error reading totcts from fullrun_ccd3_acisf12329_pi14-548_pass1_cl_src99_src.pi.gz
[Thu Feb 23 10:32:46 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 10:32:46 2012] Using photon index=1.80, rate=0.000283, arf fullrun_ccd3_acisf12329_pi14-548_pass1_cl_src99.arf
[Thu Feb 23 10:32:46 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Feb 23 10:32:46 2012] Updating source flux to 4.3e-15
[Thu Feb 23 10:33:55 2012] Flag b found in src. 99 procflags, skipping spectral fitting
[Thu Feb 23 10:33:55 2012] Source 99 has fewer than 100.000000 counts, skipping spectral fitting