[Wed Feb 22 14:01:26 2012] Detection parameters:
  Position = (89.0, 840.5) = 11 15 0.18 -61 14 37.9
  Extent = 0.5" x 0.5", rotation angle = 36 degrees
  Source counts = 14.3 +/- 4.9
  Background counts = 9.7
  Rate = 0.0001 +/- 3e-05

[Wed Feb 22 14:01:28 2012] Off-axis axis estimate = 0.87'
[Wed Feb 22 17:57:11 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 17:57:11 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Feb 22 17:57:11 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.924
[Wed Feb 22 17:57:11 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 0.38"
[Wed Feb 22 19:31:25 2012] fullrun_ccd2_acisf12329_pi14-548_cl_pass0_src73.ximg exists
[Wed Feb 22 19:31:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12329_pi14-548_cl_pass0_src73.csv
[Wed Feb 22 19:31:25 2012] fullrun_ccd2_acisf12329_pi14-548_cl_pass0_src73_1.ximg exists
[Wed Feb 22 19:31:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12329_pi14-548_cl_pass0_src73.csv
[Wed Feb 22 19:31:25 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12329_pi14-548_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12329_pi14-548_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 19:31:26 2012] fullrun_ccd2_acisf12329_pi14-548_cl_pass0_tfrozen_src73.ximg exists
[Wed Feb 22 19:31:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12329_pi14-548_cl_pass0_tfrozen_src73.csv
[Wed Feb 22 19:31:26 2012] fullrun_ccd2_acisf12329_pi14-548_cl_pass0_tfrozen_src73_1.ximg exists
[Wed Feb 22 19:31:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12329_pi14-548_cl_pass0_tfrozen_src73.csv
[Wed Feb 22 19:31:26 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12329_pi14-548_cl_pass0_tfrozen_src73_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12329_pi14-548_cl_pass0_tfrozen_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 22:21:58 2012] Source 58 is offset by -3.137520 and 1.986565 pixels which is larger than
2 X fitted extent = 0.387004 x 0.387004, not incorporating fit results
[Wed Feb 22 22:21:58 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 22:21:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 22:21:58 2012] Assessing source extent using major
[Wed Feb 22 22:21:58 2012] Source does appear to be extended
[Wed Feb 22 22:21:58 2012] Computing asymmetry using major and minor axis, asym = 1.04
[Thu Feb 23 01:46:38 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 01:46:38 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Thu Feb 23 01:46:38 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.924
[Thu Feb 23 01:46:38 2012] Giving source the simple spatial ID 72 for pass 1, mean size = 0.38"
[Thu Feb 23 03:14:58 2012] fullrun_ccd2_acisf12329_pi14-548_cl_pass1_src72.ximg exists
[Thu Feb 23 03:14:58 2012] fullrun_ccd2_acisf12329_pi14-548_cl_pass1_src72_1.ximg exists
[Thu Feb 23 03:14:58 2012] Fit fullrun_ccd2_acisf12329_pi14-548_cl_pass1_src72 appears to have run properly
[Thu Feb 23 03:14:59 2012] fullrun_ccd2_acisf12329_pi14-548_cl_pass1_tfrozen_src72.ximg exists
[Thu Feb 23 03:14:59 2012] fullrun_ccd2_acisf12329_pi14-548_cl_pass1_tfrozen_src72_1.ximg exists
[Thu Feb 23 03:14:59 2012] Fit fullrun_ccd2_acisf12329_pi14-548_cl_pass1_tfrozen_src72 appears to have run properly
[Thu Feb 23 06:48:42 2012] Source 58 is offset by 3.054512 and 2.596016 pixels which is larger than
2 X fitted extent = 0.387004 x 0.387004, not incorporating fit results
[Thu Feb 23 06:48:42 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 06:48:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 06:48:42 2012] Assessing source extent using major
[Thu Feb 23 06:48:42 2012] Source does appear to be extended
[Thu Feb 23 06:48:42 2012] Computing asymmetry using major and minor axis, asym = 1.04
[Thu Feb 23 08:40:29 2012] Writing source region out to fullrun_ccd2_acisf12329_pi14-548_pass1_cl_src58_src.reg
[Thu Feb 23 08:40:29 2012] Extracting stamp from image fullrun_ccd2_acisf12329_pi14-548_cl_sm2.00.img.gz, (66, 817) - (112, 864)
[Thu Feb 23 08:40:29 2012] Writing fullrun_ccd2_acisf12329_pi14-548_pass1_cl_src58.gif
[Thu Feb 23 09:26:37 2012] Size of ../../acisf12329/products/events/fullrun_ccd2_acisf12329_pi14-548_pass1_cl_src58_src.evt.gz[events] = 28 counts
[Thu Feb 23 09:26:37 2012] Mean chipx,y = (33.04, 944.46)
[Thu Feb 23 09:26:37 2012] Mean tdetx,y = (4005.46, 4052.96)
[Thu Feb 23 09:26:37 2012] chipx,y range = (15.00-51.00, 925.00-964.00)
[Thu Feb 23 09:26:37 2012] Size of ../../acisf12329/products/events/fullrun_ccd2_acisf12329_pi14-548_pass1_cl_src58_bgd.evt.gz[events] = 279 counts
[Thu Feb 23 09:26:38 2012] Not generating rmf since there are only 14 counts
[Thu Feb 23 09:26:38 2012] arf not found, will run specextract
[Thu Feb 23 09:27:07 2012] ../../acisf12329/products/spectra/fullrun_ccd2_acisf12329_pi14-548_pass1_cl_src58.warf not found
[Thu Feb 23 09:27:07 2012] ../../acisf12329/products/spectra/fullrun_ccd2_acisf12329_pi14-548_pass1_cl_src58.wrmf not found
[Thu Feb 23 09:27:07 2012] Removal of ../../acisf12329/products/spectra/fullrun_ccd2_acisf12329_pi14-548_pass1_cl_src58.soff failed
[Thu Feb 23 09:38:31 2012] Spectrum 58 has only 14 counts, deleting rmf
[Thu Feb 23 09:38:31 2012] 195.812
[Thu Feb 23 10:32:43 2012] Updating aperture counts using extracted products
[Thu Feb 23 10:32:43 2012] Error reading totcts from fullrun_ccd2_acisf12329_pi14-548_pass1_cl_src58_src.pi.gz
[Thu Feb 23 10:32:44 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 10:32:44 2012] Using photon index=1.80, rate=9.82e-05, arf fullrun_ccd2_acisf12329_pi14-548_pass1_cl_src58.arf
[Thu Feb 23 10:32:44 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Feb 23 10:32:44 2012] Updating source flux to 1.5e-15
[Thu Feb 23 10:33:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting