[Wed Feb 22 14:01:18 2012] Detection parameters:
  Position = (1150.3, 704.9) = 11 15 26.81 -61 14 8.6
  Extent = 1.3" x 0.5", rotation angle = 69 degrees
  Source counts = 21.0 +/- 5.6
  Background counts = 10.0
  Rate = 0.0001 +/- 4e-05

[Wed Feb 22 14:01:19 2012] Off-axis axis estimate = 3.09'
[Wed Feb 22 16:04:31 2012] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 16:04:31 2012] Initial guess for spatial extent in simple fitting = 0.60"
[Wed Feb 22 16:04:31 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.018
[Wed Feb 22 16:04:31 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 0.60"
[Wed Feb 22 17:57:09 2012] fullrun_ccd1_acisf12329_pi14-548_cl_pass0_src51.ximg exists
[Wed Feb 22 17:57:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12329_pi14-548_cl_pass0_src51.csv
[Wed Feb 22 17:57:09 2012] fullrun_ccd1_acisf12329_pi14-548_cl_pass0_src51_1.ximg exists
[Wed Feb 22 17:57:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12329_pi14-548_cl_pass0_src51.csv
[Wed Feb 22 17:57:09 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12329_pi14-548_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12329_pi14-548_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 17:57:10 2012] fullrun_ccd1_acisf12329_pi14-548_cl_pass0_tfrozen_src51.ximg exists
[Wed Feb 22 17:57:10 2012] fullrun_ccd1_acisf12329_pi14-548_cl_pass0_tfrozen_src51_1.ximg exists
[Wed Feb 22 17:57:10 2012] Fit fullrun_ccd1_acisf12329_pi14-548_cl_pass0_tfrozen_src51 appears to have run properly
[Wed Feb 22 22:21:46 2012] Source 111 is offset by -4.593269 and 3.722419 pixels which is larger than
2 X fitted extent = 0.608427 x 0.608427, not incorporating fit results
[Wed Feb 22 22:21:46 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 22:21:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 22:21:46 2012] Assessing source extent using major
[Wed Feb 22 22:21:46 2012] Source does appear to be extended
[Wed Feb 22 22:21:46 2012] Computing asymmetry using major and minor axis, asym = 2.54
[Wed Feb 22 22:21:46 2012] Source is asymmetric
[Thu Feb 23 00:00:11 2012] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 00:00:11 2012] Initial guess for spatial extent in simple fitting = 0.60"
[Thu Feb 23 00:00:11 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.018
[Thu Feb 23 00:00:11 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 0.60"
[Thu Feb 23 01:46:37 2012] fullrun_ccd1_acisf12329_pi14-548_cl_pass1_src50.ximg exists
[Thu Feb 23 01:46:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12329_pi14-548_cl_pass1_src50.csv
[Thu Feb 23 01:46:37 2012] fullrun_ccd1_acisf12329_pi14-548_cl_pass1_src50_1.ximg exists
[Thu Feb 23 01:46:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12329_pi14-548_cl_pass1_src50.csv
[Thu Feb 23 01:46:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12329_pi14-548_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12329_pi14-548_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 01:46:38 2012] fullrun_ccd1_acisf12329_pi14-548_cl_pass1_tfrozen_src50.ximg exists
[Thu Feb 23 01:46:38 2012] fullrun_ccd1_acisf12329_pi14-548_cl_pass1_tfrozen_src50_1.ximg exists
[Thu Feb 23 01:46:38 2012] Fit fullrun_ccd1_acisf12329_pi14-548_cl_pass1_tfrozen_src50 appears to have run properly
[Thu Feb 23 06:48:30 2012] Spatial fit model total counts = 43.995500, observed total counts = 44.000000
[Thu Feb 23 06:48:30 2012] Offset between fit and detection position for source 111 = 0.859057 pixels
[Thu Feb 23 06:48:30 2012] 44.356400 total counts/ 23.868800 bgd. counts: snr = 4.193492
Spatial fit parameters:
  Offset between fit and detection position for source 111 = 0.859057 pixels
  Position = (1151.0, 705.2) = 11 15 26.79 -61 14 8.6
  Extent = 1.0 (0.5-1.5)", rotation angle = 0
  Source counts = 20.5 +/- 6.7
  Background counts = 23.9
  Rate = 0.0001 +/- 5e-05
[Thu Feb 23 06:48:30 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 06:48:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 06:48:30 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 06:48:30 2012] Source does appear to be extended
[Thu Feb 23 06:48:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 07:38:49 2012] Writing source region out to fullrun_ccd1_acisf12329_pi14-548_pass1_cl_src111_src.reg
[Thu Feb 23 07:38:49 2012] Extracting stamp from image fullrun_ccd1_acisf12329_pi14-548_cl_sm2.00.img.gz, (1105, 660) - (1197, 751)
[Thu Feb 23 07:38:49 2012] Writing fullrun_ccd1_acisf12329_pi14-548_pass1_cl_src111.gif
[Thu Feb 23 08:06:16 2012] Size of ../../acisf12329/products/events/fullrun_ccd1_acisf12329_pi14-548_pass1_cl_src111_src.evt.gz[events] = 41 counts
[Thu Feb 23 08:06:16 2012] Mean chipx,y = (231.83, 849.10)
[Thu Feb 23 08:06:16 2012] Mean tdetx,y = (4282.90, 4338.83)
[Thu Feb 23 08:06:16 2012] chipx,y range = (213.00-247.00, 827.00-870.00)
[Thu Feb 23 08:06:16 2012] Size of ../../acisf12329/products/events/fullrun_ccd1_acisf12329_pi14-548_pass1_cl_src111_bgd.evt.gz[events] = 239 counts
[Thu Feb 23 08:06:18 2012] Not generating rmf since there are only 20 counts
[Thu Feb 23 08:06:18 2012] arf not found, will run specextract
[Thu Feb 23 08:06:50 2012] ../../acisf12329/products/spectra/fullrun_ccd1_acisf12329_pi14-548_pass1_cl_src111.warf not found
[Thu Feb 23 08:06:50 2012] ../../acisf12329/products/spectra/fullrun_ccd1_acisf12329_pi14-548_pass1_cl_src111.wrmf not found
[Thu Feb 23 08:06:50 2012] Removal of ../../acisf12329/products/spectra/fullrun_ccd1_acisf12329_pi14-548_pass1_cl_src111.soff failed
[Thu Feb 23 08:40:26 2012] Spectrum 111 has only 20 counts, deleting rmf
[Thu Feb 23 08:40:26 2012] 200.168
[Thu Feb 23 10:32:40 2012] Updating aperture counts using extracted products
[Thu Feb 23 10:32:40 2012] Error reading totcts from fullrun_ccd1_acisf12329_pi14-548_pass1_cl_src111_src.pi.gz
[Thu Feb 23 10:32:41 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 10:32:41 2012] Using photon index=1.80, rate=0.000141, arf fullrun_ccd1_acisf12329_pi14-548_pass1_cl_src111.arf
[Thu Feb 23 10:32:41 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Feb 23 10:32:41 2012] Updating source flux to 2.1e-15
[Thu Feb 23 10:33:17 2012] Flag b found in src. 111 procflags, skipping spectral fitting
[Thu Feb 23 10:33:17 2012] Source 111 has fewer than 100.000000 counts, skipping spectral fitting