[Wed Feb 22 14:01:08 2012] Detection parameters:
  Position = (666.9, 79.5) = 11 15 4.82 -61 14 8.4
  Extent = 0.8" x 0.5", rotation angle = 94 degrees
  Source counts = 35.1 +/- 6.7
  Background counts = 9.9
  Rate = 0.0002 +/- 5e-05

[Wed Feb 22 14:01:11 2012] Off-axis axis estimate = 1.29'
[Wed Feb 22 14:10:01 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 14:10:01 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Feb 22 14:10:01 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.914
[Wed Feb 22 14:10:01 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 0.38"
[Wed Feb 22 16:04:30 2012] fullrun_ccd0_acisf12329_pi14-548_cl_pass0_src43.ximg exists
[Wed Feb 22 16:04:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12329_pi14-548_cl_pass0_src43.csv
[Wed Feb 22 16:04:30 2012] fullrun_ccd0_acisf12329_pi14-548_cl_pass0_src43_1.ximg exists
[Wed Feb 22 16:04:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12329_pi14-548_cl_pass0_src43.csv
[Wed Feb 22 16:04:30 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12329_pi14-548_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12329_pi14-548_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 16:04:30 2012] fullrun_ccd0_acisf12329_pi14-548_cl_pass0_tfrozen_src43.ximg exists
[Wed Feb 22 16:04:30 2012] fullrun_ccd0_acisf12329_pi14-548_cl_pass0_tfrozen_src43_1.ximg exists
[Wed Feb 22 16:04:30 2012] Fit fullrun_ccd0_acisf12329_pi14-548_cl_pass0_tfrozen_src43 appears to have run properly
[Wed Feb 22 22:21:33 2012] Source 43 is offset by 3.022809 and 2.645367 pixels which is larger than
2 X fitted extent = 0.390366 x 0.390366, not incorporating fit results
[Wed Feb 22 22:21:33 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 22:21:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 22:21:33 2012] Assessing source extent using major
[Wed Feb 22 22:21:33 2012] Source does appear to be extended
[Wed Feb 22 22:21:33 2012] Computing asymmetry using major and minor axis, asym = 1.65
[Wed Feb 22 22:21:33 2012] Source is asymmetric
[Wed Feb 22 22:22:52 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 22:22:52 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Feb 22 22:22:52 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.914
[Wed Feb 22 22:22:52 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 0.38"
[Thu Feb 23 00:00:10 2012] fullrun_ccd0_acisf12329_pi14-548_cl_pass1_src43.ximg exists
[Thu Feb 23 00:00:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12329_pi14-548_cl_pass1_src43.csv
[Thu Feb 23 00:00:10 2012] fullrun_ccd0_acisf12329_pi14-548_cl_pass1_src43_1.ximg exists
[Thu Feb 23 00:00:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12329_pi14-548_cl_pass1_src43.csv
[Thu Feb 23 00:00:10 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12329_pi14-548_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12329_pi14-548_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 00:00:11 2012] fullrun_ccd0_acisf12329_pi14-548_cl_pass1_tfrozen_src43.ximg exists
[Thu Feb 23 00:00:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12329_pi14-548_cl_pass1_tfrozen_src43.csv
[Thu Feb 23 00:00:11 2012] fullrun_ccd0_acisf12329_pi14-548_cl_pass1_tfrozen_src43_1.ximg exists
[Thu Feb 23 00:00:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12329_pi14-548_cl_pass1_tfrozen_src43.csv
[Thu Feb 23 00:00:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12329_pi14-548_cl_pass1_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12329_pi14-548_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 06:48:14 2012] Spatial fit model total counts = 63.451100, observed total counts = 180.000000
[Thu Feb 23 06:48:14 2012] Poor agreement between spatial fit and data for source 43
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Feb 23 06:48:14 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 06:48:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 06:48:14 2012] Assessing source extent using major
[Thu Feb 23 06:48:14 2012] Source does appear to be extended
[Thu Feb 23 06:48:14 2012] Computing asymmetry using major and minor axis, asym = 1.65
[Thu Feb 23 06:48:14 2012] Source is asymmetric
[Thu Feb 23 06:49:36 2012] Writing source region out to fullrun_ccd0_acisf12329_pi14-548_pass1_cl_src43_src.reg
[Thu Feb 23 06:49:36 2012] Extracting stamp from image fullrun_ccd0_acisf12329_pi14-548_cl_sm2.00.img.gz, (629, 41) - (705, 118)
[Thu Feb 23 06:49:36 2012] Writing fullrun_ccd0_acisf12329_pi14-548_pass1_cl_src43.gif
[Thu Feb 23 07:13:27 2012] Size of ../../acisf12329/products/events/fullrun_ccd0_acisf12329_pi14-548_pass1_cl_src43_src.evt.gz[events] = 49 counts
[Thu Feb 23 07:13:27 2012] Mean chipx,y = (989.57, 963.88)
[Thu Feb 23 07:13:27 2012] Mean tdetx,y = (4024.88, 4142.43)
[Thu Feb 23 07:13:27 2012] chipx,y range = (974.00-1007.00, 946.00-980.00)
[Thu Feb 23 07:13:27 2012] Size of ../../acisf12329/products/events/fullrun_ccd0_acisf12329_pi14-548_pass1_cl_src43_bgd.evt.gz[events] = 185 counts
[Thu Feb 23 07:13:28 2012] Not generating rmf since there are only 35 counts
[Thu Feb 23 07:13:28 2012] arf not found, will run specextract
[Thu Feb 23 07:13:54 2012] ../../acisf12329/products/spectra/fullrun_ccd0_acisf12329_pi14-548_pass1_cl_src43.warf not found
[Thu Feb 23 07:13:54 2012] ../../acisf12329/products/spectra/fullrun_ccd0_acisf12329_pi14-548_pass1_cl_src43.wrmf not found
[Thu Feb 23 07:13:54 2012] Removal of ../../acisf12329/products/spectra/fullrun_ccd0_acisf12329_pi14-548_pass1_cl_src43.soff failed
[Thu Feb 23 07:38:47 2012] Spectrum 43 has only 35 counts, deleting rmf
[Thu Feb 23 07:38:47 2012] 201.357
[Thu Feb 23 10:32:37 2012] Updating aperture counts using extracted products
[Thu Feb 23 10:32:37 2012] Error reading totcts from fullrun_ccd0_acisf12329_pi14-548_pass1_cl_src43_src.pi.gz
[Thu Feb 23 10:32:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 10:32:38 2012] Using photon index=1.80, rate=0.000242, arf fullrun_ccd0_acisf12329_pi14-548_pass1_cl_src43.arf
[Thu Feb 23 10:32:38 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Feb 23 10:32:38 2012] Updating source flux to 3.7e-15
[Thu Feb 23 10:32:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting