[Tue Nov  1 22:42:10 2011] Detection parameters:
  Position = (1088.6, 882.1) = 11 14 53.80 -61 19 4.9
  Extent = 0.5" x 0.5", rotation angle = 145 degrees
  Source counts = 52.2 +/- 7.7
  Background counts = 6.8
  Rate = 0.0003 +/- 5e-05

[Tue Nov  1 22:42:15 2011] Off-axis axis estimate = 3.76'
[Wed Nov  2 04:08:06 2011] Using EEF radius (= 0.76 ")to estimate initial spatial extent for simple fitting
[Wed Nov  2 04:08:06 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Wed Nov  2 04:08:06 2011] source mask rpix=1.5, npix_max = 16, mask sum = 14, frac = 0.834
[Wed Nov  2 04:08:06 2011] Giving source the simple spatial ID 76 for pass 0, mean size = 0.76"
[Wed Nov  2 06:43:49 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass0_src76.ximg exists
[Wed Nov  2 06:43:49 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12328_pi14-548_cl_pass0_src76.csv
[Wed Nov  2 06:43:49 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass0_src76_1.ximg exists
[Wed Nov  2 06:43:49 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12328_pi14-548_cl_pass0_src76.csv
[Wed Nov  2 06:43:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12328_pi14-548_cl_pass0_src76_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12328_pi14-548_cl_pass0_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov  2 06:43:50 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass0_tfrozen_src76.ximg exists
[Wed Nov  2 06:43:50 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass0_tfrozen_src76_1.ximg exists
[Wed Nov  2 06:43:50 2011] Fit fullrun_ccd3_acisf12328_pi14-548_cl_pass0_tfrozen_src76 appears to have run properly
[Wed Nov  2 07:24:41 2011] Spatial fit model total counts = 65.414100, observed total counts = 66.000000
[Wed Nov  2 07:24:41 2011] Offset between fit and detection position for source 64 = 1.064796 pixels
[Wed Nov  2 07:24:41 2011] 65.272140 total counts/ 8.434440 bgd. counts: snr = 19.570791
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 1.064796 pixels
  Position = (1089.6, 882.6) = 11 14 53.77 -61 19 5.0
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 56.8 +/- 8.1
  Background counts = 8.4
  Rate = 0.0003 +/- 5e-05
[Wed Nov  2 07:24:42 2011] Vigneting correction estimate = 1.000000
[Wed Nov  2 07:24:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov  2 07:24:42 2011] Assessing source extent using major axis lower bound
[Wed Nov  2 07:24:42 2011] Source does appear to be extended
[Wed Nov  2 07:24:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov  2 12:16:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov  2 12:16:34 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Wed Nov  2 12:16:34 2011] source mask rpix=1.8, npix_max = 20, mask sum = 22, frac = 1.058
[Wed Nov  2 12:16:34 2011] Giving source the simple spatial ID 72 for pass 1, mean size = 0.88"
[Wed Nov  2 15:14:23 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass1_src72.ximg exists
[Wed Nov  2 15:14:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12328_pi14-548_cl_pass1_src72.csv
[Wed Nov  2 15:14:23 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass1_src72_1.ximg exists
[Wed Nov  2 15:14:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12328_pi14-548_cl_pass1_src72.csv
[Wed Nov  2 15:14:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12328_pi14-548_cl_pass1_src72_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12328_pi14-548_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov  2 15:14:24 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass1_tfrozen_src72.ximg exists
[Wed Nov  2 15:14:24 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass1_tfrozen_src72_1.ximg exists
[Wed Nov  2 15:14:24 2011] Fit fullrun_ccd3_acisf12328_pi14-548_cl_pass1_tfrozen_src72 appears to have run properly
[Wed Nov  2 15:48:52 2011] Spatial fit model total counts = 67.010800, observed total counts = 67.000000
[Wed Nov  2 15:48:52 2011] Offset between fit and detection position for source 64 = 0.098739 pixels
[Wed Nov  2 15:48:52 2011] 67.164800 total counts/ 12.261200 bgd. counts: snr = 15.679577
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 0.098739 pixels
  Position = (1089.6, 882.5) = 11 14 53.77 -61 19 5.0
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 54.9 +/- 8.2
  Background counts = 12.3
  Rate = 0.0003 +/- 5e-05
[Wed Nov  2 15:48:52 2011] Vigneting correction estimate = 1.000000
[Wed Nov  2 15:48:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov  2 15:48:52 2011] Assessing source extent using major axis lower bound
[Wed Nov  2 15:48:52 2011] Source does appear to be extended
[Wed Nov  2 15:48:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov  2 18:39:39 2011] Writing source region out to fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src64_src.reg
[Wed Nov  2 18:39:39 2011] Extracting stamp from image fullrun_ccd3_acisf12328_pi14-548_cl_sm2.00.img.gz, (1052, 845) - (1128, 920)
[Wed Nov  2 18:39:39 2011] Writing fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src64.gif
[Wed Nov  2 19:26:50 2011] Size of ../../acisf12328/products/events/fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src64_src.evt.gz[events] = 63 counts
[Wed Nov  2 19:26:50 2011] Mean chipx,y = (492.17, 939.37)
[Wed Nov  2 19:26:50 2011] Mean tdetx,y = (4192.63, 3553.17)
[Wed Nov  2 19:26:50 2011] chipx,y range = (477.00-514.00, 919.00-962.00)
[Wed Nov  2 19:26:50 2011] Size of ../../acisf12328/products/events/fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src64_bgd.evt.gz[events] = 71 counts
[Wed Nov  2 19:26:51 2011] Not generating rmf since there are only 54 counts
[Wed Nov  2 19:26:51 2011] arf not found, will run specextract
[Wed Nov  2 19:27:19 2011] ../../acisf12328/products/spectra/fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src64.warf not found
[Wed Nov  2 19:27:19 2011] ../../acisf12328/products/spectra/fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src64.wrmf not found
[Wed Nov  2 19:27:19 2011] Removal of ../../acisf12328/products/spectra/fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src64.soff failed
[Wed Nov  2 19:51:34 2011] Spectrum 64 has only 55 counts, deleting rmf
[Wed Nov  2 19:51:34 2011] 175.894
[Wed Nov  2 19:53:49 2011] Updating aperture counts using extracted products
[Wed Nov  2 19:53:49 2011] Error reading totcts from fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src64_src.pi.gz
[Wed Nov  2 19:53:50 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov  2 19:53:50 2011] Using photon index=1.80, rate=0.000332, arf fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src64.arf
[Wed Nov  2 19:53:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Nov  2 19:53:50 2011] Updating source flux to 5.7e-15
[Wed Nov  2 19:55:15 2011] Source 64 has fewer than 100.000000 counts, skipping spectral fitting