[Tue Nov  1 22:42:09 2011] Detection parameters:
  Position = (850.6, 1302.4) = 11 15 10.06 -61 15 38.2
  Extent = 0.7" x 0.6", rotation angle = 26 degrees
  Source counts = 940.0 +/- 32.6
  Background counts = 124.0
  Rate = 0.006 +/- 0.0002

[Tue Nov  1 22:42:15 2011] Off-axis axis estimate = 0.84'
[Wed Nov  2 04:08:06 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Nov  2 04:08:06 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Nov  2 04:08:06 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.384
[Wed Nov  2 04:08:06 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 0.38"
[Wed Nov  2 06:43:48 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass0_src4.ximg exists
[Wed Nov  2 06:43:48 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12328_pi14-548_cl_pass0_src4.csv
[Wed Nov  2 06:43:48 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass0_src4_1.ximg exists
[Wed Nov  2 06:43:48 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12328_pi14-548_cl_pass0_src4.csv
[Wed Nov  2 06:43:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12328_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12328_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov  2 06:43:49 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Wed Nov  2 06:43:49 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Nov  2 06:43:49 2011] Fit fullrun_ccd3_acisf12328_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Nov  2 07:24:41 2011] Spatial fit model total counts = 1168.530000, observed total counts = 1160.000000
[Wed Nov  2 07:24:41 2011] Offset between fit and detection position for source 3 = 0.702906 pixels
[Wed Nov  2 07:24:41 2011] 1179.103000 total counts/ 317.146000 bgd. counts: snr = 48.401184
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.702906 pixels
  Position = (850.9, 1303.0) = 11 15 10.07 -61 15 38.1
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 862.0 +/- 34.3
  Background counts = 317.1
  Rate = 0.005 +/- 0.0002
[Wed Nov  2 07:24:42 2011] Vigneting correction estimate = 1.000000
[Wed Nov  2 07:24:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov  2 07:24:42 2011] Assessing source extent using major axis lower bound
[Wed Nov  2 07:24:42 2011] Source does appear to be extended
[Wed Nov  2 07:24:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov  2 12:16:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov  2 12:16:34 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Wed Nov  2 12:16:34 2011] source mask rpix=1.0, npix_max = 8, mask sum = 6, frac = 0.689
[Wed Nov  2 12:16:34 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 0.48"
[Wed Nov  2 15:14:22 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass1_src4.ximg exists
[Wed Nov  2 15:14:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12328_pi14-548_cl_pass1_src4.csv
[Wed Nov  2 15:14:22 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass1_src4_1.ximg exists
[Wed Nov  2 15:14:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12328_pi14-548_cl_pass1_src4.csv
[Wed Nov  2 15:14:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12328_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12328_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov  2 15:14:23 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Wed Nov  2 15:14:23 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Nov  2 15:14:23 2011] Fit fullrun_ccd3_acisf12328_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Nov  2 15:48:52 2011] Spatial fit model total counts = 1151.510000, observed total counts = 1153.000000
[Wed Nov  2 15:48:52 2011] Offset between fit and detection position for source 3 = 0.009591 pixels
[Wed Nov  2 15:48:52 2011] 1159.693000 total counts/ 311.365000 bgd. counts: snr = 48.076064
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.009591 pixels
  Position = (850.9, 1303.0) = 11 15 10.07 -61 15 38.1
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 848.3 +/- 34.1
  Background counts = 311.4
  Rate = 0.005 +/- 0.0002
[Wed Nov  2 15:48:52 2011] Vigneting correction estimate = 1.000000
[Wed Nov  2 15:48:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov  2 15:48:52 2011] Assessing source extent using major axis lower bound
[Wed Nov  2 15:48:52 2011] Source does appear to be extended
[Wed Nov  2 15:48:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov  2 18:39:36 2011] Writing source region out to fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src3_src.reg
[Wed Nov  2 18:39:36 2011] Extracting stamp from image fullrun_ccd3_acisf12328_pi14-548_cl_sm2.00.img.gz, (829, 1281) - (873, 1325)
[Wed Nov  2 18:39:36 2011] Writing fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src3.gif
[Wed Nov  2 18:42:08 2011] Size of ../../acisf12328/products/events/fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src3_src.evt.gz[events] = 942 counts
[Wed Nov  2 18:42:08 2011] Mean chipx,y = (979.27, 928.82)
[Wed Nov  2 18:42:08 2011] Mean tdetx,y = (4203.18, 4040.27)
[Wed Nov  2 18:42:08 2011] chipx,y range = (958.00-1001.00, 908.00-952.00)
[Wed Nov  2 18:42:08 2011] Size of ../../acisf12328/products/events/fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 279 counts
[Wed Nov  2 18:42:10 2011] rmf not found, will run specextract
[Wed Nov  2 18:42:10 2011] arf not found, will run specextract
[Wed Nov  2 18:42:37 2011] ../../acisf12328/products/spectra/fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src3.warf not found
[Wed Nov  2 18:42:37 2011] ../../acisf12328/products/spectra/fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src3.wrmf not found
[Wed Nov  2 18:42:37 2011] Removal of ../../acisf12328/products/spectra/fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src3.soff failed
[Wed Nov  2 19:51:33 2011] Keeping rmf generated by specextract
[Wed Nov  2 19:51:33 2011] 202.502
[Wed Nov  2 19:53:48 2011] Updating aperture counts using extracted products
[Wed Nov  2 19:53:48 2011] Error reading totcts from fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src3_src.pi.gz
[Wed Nov  2 19:53:49 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov  2 19:53:49 2011] Using photon index=1.80, rate=0.00514, arf fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src3.arf
[Wed Nov  2 19:53:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Nov  2 19:53:49 2011] Updating source flux to 7.8e-14