[Tue Nov  1 22:42:09 2011] Detection parameters:
  Position = (615.4, 1000.8) = 11 15 26.13 -61 18 6.5
  Extent = 0.6" x 0.5", rotation angle = 138 degrees
  Source counts = 127.8 +/- 11.6
  Background counts = 7.2
  Rate = 0.0008 +/- 7e-05

[Tue Nov  1 22:42:15 2011] Off-axis axis estimate = 3.80'
[Wed Nov  2 04:08:06 2011] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Wed Nov  2 04:08:06 2011] Initial guess for spatial extent in simple fitting = 0.77"
[Wed Nov  2 04:08:06 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.935
[Wed Nov  2 04:08:06 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 0.77"
[Wed Nov  2 06:43:48 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass0_src30.ximg exists
[Wed Nov  2 06:43:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12328_pi14-548_cl_pass0_src30.csv
[Wed Nov  2 06:43:48 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass0_src30_1.ximg exists
[Wed Nov  2 06:43:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12328_pi14-548_cl_pass0_src30.csv
[Wed Nov  2 06:43:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12328_pi14-548_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12328_pi14-548_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov  2 06:43:49 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Wed Nov  2 06:43:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12328_pi14-548_cl_pass0_tfrozen_src30.csv
[Wed Nov  2 06:43:49 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Wed Nov  2 06:43:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12328_pi14-548_cl_pass0_tfrozen_src30.csv
[Wed Nov  2 06:43:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12328_pi14-548_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12328_pi14-548_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov  2 07:24:41 2011] Spatial fit model total counts = 201.325000, observed total counts = 228.000000
[Wed Nov  2 07:24:41 2011] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Nov  2 07:24:42 2011] Vigneting correction estimate = 1.000000
[Wed Nov  2 07:24:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov  2 07:24:42 2011] Assessing source extent using major
[Wed Nov  2 07:24:42 2011] Source does appear to be extended
[Wed Nov  2 07:24:42 2011] Computing asymmetry using major and minor axis, asym = 1.18
[Wed Nov  2 12:16:34 2011] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Wed Nov  2 12:16:34 2011] Initial guess for spatial extent in simple fitting = 0.77"
[Wed Nov  2 12:16:34 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.935
[Wed Nov  2 12:16:34 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 0.77"
[Wed Nov  2 15:14:23 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass1_src29.ximg exists
[Wed Nov  2 15:14:23 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass1_src29_1.ximg exists
[Wed Nov  2 15:14:23 2011] Fit fullrun_ccd3_acisf12328_pi14-548_cl_pass1_src29 appears to have run properly
[Wed Nov  2 15:14:24 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass1_tfrozen_src29.ximg exists
[Wed Nov  2 15:14:24 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass1_tfrozen_src29_1.ximg exists
[Wed Nov  2 15:14:24 2011] Fit fullrun_ccd3_acisf12328_pi14-548_cl_pass1_tfrozen_src29 appears to have run properly
[Wed Nov  2 15:48:52 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 22.749408 pixels away
[Wed Nov  2 15:48:52 2011] Spatial fit model total counts = 209.704000, observed total counts = 228.000000
[Wed Nov  2 15:48:52 2011] Offset between fit and detection position for source 25 = 0.749595 pixels
[Wed Nov  2 15:48:52 2011] 218.233200 total counts/ 118.899000 bgd. counts: snr = 9.109818
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.749595 pixels
  Position = (615.8, 1000.1) = 11 15 26.14 -61 18 7.0
  Extent = 0.7" x 0.5", rotation angle = 313
  Source counts = 99.3 +/- 14.8
  Background counts = 118.9
  Rate = 0.0006 +/- 9e-05
[Wed Nov  2 15:48:52 2011] Vigneting correction estimate = 1.000000
[Wed Nov  2 15:48:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov  2 15:48:52 2011] Assessing source extent using major
[Wed Nov  2 15:48:52 2011] Source does appear to be extended
[Wed Nov  2 15:48:52 2011] Computing asymmetry using major and minor axis, asym = 1.35
[Wed Nov  2 18:39:37 2011] Writing source region out to fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src25_src.reg
[Wed Nov  2 18:39:37 2011] Extracting stamp from image fullrun_ccd3_acisf12328_pi14-548_cl_sm2.00.img.gz, (585, 970) - (646, 1031)
[Wed Nov  2 18:39:37 2011] Writing fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src25.gif
[Wed Nov  2 18:58:28 2011] Size of ../../acisf12328/products/events/fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src25_src.evt.gz[events] = 134 counts
[Wed Nov  2 18:58:28 2011] Mean chipx,y = (822.52, 581.02)
[Wed Nov  2 18:58:28 2011] Mean tdetx,y = (4550.98, 3883.52)
[Wed Nov  2 18:58:28 2011] chipx,y range = (804.00-845.00, 560.00-600.00)
[Wed Nov  2 18:58:28 2011] Size of ../../acisf12328/products/events/fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src25_bgd.evt.gz[events] = 100 counts
[Wed Nov  2 18:58:30 2011] Not generating rmf since there are only 99 counts
[Wed Nov  2 18:58:30 2011] arf not found, will run specextract
[Wed Nov  2 18:59:00 2011] ../../acisf12328/products/spectra/fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src25.warf not found
[Wed Nov  2 18:59:00 2011] ../../acisf12328/products/spectra/fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src25.wrmf not found
[Wed Nov  2 18:59:00 2011] Removal of ../../acisf12328/products/spectra/fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src25.soff failed
[Wed Nov  2 19:51:33 2011] Spectrum 25 has only 99 counts, deleting rmf
[Wed Nov  2 19:51:33 2011] 193.858
[Wed Nov  2 19:53:48 2011] Updating aperture counts using extracted products
[Wed Nov  2 19:53:48 2011] Error reading totcts from fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src25_src.pi.gz
[Wed Nov  2 19:53:50 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov  2 19:53:50 2011] Using photon index=1.80, rate=0.000601, arf fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src25.arf
[Wed Nov  2 19:53:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Nov  2 19:53:50 2011] Updating source flux to 9.4e-15
[Wed Nov  2 19:55:15 2011] Flag p found in src. 25 procflags, skipping spectral fitting
[Wed Nov  2 19:55:15 2011] Source 25 has fewer than 100.000000 counts, skipping spectral fitting