[Tue Nov  1 22:42:09 2011] Detection parameters:
  Position = (873.4, 1304.3) = 11 15 8.49 -61 15 37.3
  Extent = 0.6" x 0.6", rotation angle = 105 degrees
  Source counts = 263.4 +/- 20.6
  Background counts = 160.6
  Rate = 0.002 +/- 0.0001

[Tue Nov  1 22:42:15 2011] Off-axis axis estimate = 0.65'
[Wed Nov  2 04:08:06 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Wed Nov  2 04:08:06 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Wed Nov  2 04:08:06 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.363
[Wed Nov  2 04:08:06 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 0.39"
[Wed Nov  2 06:43:48 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass0_src16.ximg exists
[Wed Nov  2 06:43:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12328_pi14-548_cl_pass0_src16.csv
[Wed Nov  2 06:43:48 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass0_src16_1.ximg exists
[Wed Nov  2 06:43:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12328_pi14-548_cl_pass0_src16.csv
[Wed Nov  2 06:43:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12328_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12328_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov  2 06:43:49 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Wed Nov  2 06:43:49 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Wed Nov  2 06:43:49 2011] Fit fullrun_ccd3_acisf12328_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Wed Nov  2 07:24:41 2011] Spatial fit model total counts = 822.317000, observed total counts = 822.000000
[Wed Nov  2 07:24:41 2011] Offset between fit and detection position for source 16 = 0.579261 pixels
[Wed Nov  2 07:24:41 2011] 834.568000 total counts/ 624.760000 bgd. counts: snr = 8.393932
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.579261 pixels
  Position = (873.9, 1304.7) = 11 15 8.50 -61 15 37.3
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 209.8 +/- 28.9
  Background counts = 624.8
  Rate = 0.001 +/- 0.0002
[Wed Nov  2 07:24:42 2011] Vigneting correction estimate = 1.000000
[Wed Nov  2 07:24:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov  2 07:24:42 2011] Assessing source extent using major axis lower bound
[Wed Nov  2 07:24:42 2011] Source does appear to be extended
[Wed Nov  2 07:24:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov  2 12:16:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov  2 12:16:34 2011] Initial guess for spatial extent in simple fitting = 0.70"
[Wed Nov  2 12:16:34 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.086
[Wed Nov  2 12:16:34 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.70"
[Wed Nov  2 15:14:22 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass1_src15.ximg exists
[Wed Nov  2 15:14:22 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12328_pi14-548_cl_pass1_src15.csv
[Wed Nov  2 15:14:22 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass1_src15_1.ximg exists
[Wed Nov  2 15:14:22 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12328_pi14-548_cl_pass1_src15.csv
[Wed Nov  2 15:14:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12328_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12328_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov  2 15:14:23 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Wed Nov  2 15:14:23 2011] fullrun_ccd3_acisf12328_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Nov  2 15:14:23 2011] Fit fullrun_ccd3_acisf12328_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Wed Nov  2 15:48:52 2011] Warning, spatial fit 15 centroid is now closest to src. 52
[Wed Nov  2 15:48:52 2011] Vigneting correction estimate = 1.000000
[Wed Nov  2 15:48:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov  2 15:48:52 2011] Assessing source extent using major axis lower bound
[Wed Nov  2 15:48:52 2011] Source does appear to be extended
[Wed Nov  2 15:48:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov  2 18:39:36 2011] Writing source region out to fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src16_src.reg
[Wed Nov  2 18:39:36 2011] Extracting stamp from image fullrun_ccd3_acisf12328_pi14-548_cl_sm2.00.img.gz, (842, 1273) - (906, 1337)
[Wed Nov  2 18:39:36 2011] Writing fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src16.gif
[Wed Nov  2 18:49:20 2011] Size of ../../acisf12328/products/events/fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src16_src.evt.gz[events] = 425 counts
[Wed Nov  2 18:49:20 2011] Mean chipx,y = (970.38, 950.17)
[Wed Nov  2 18:49:20 2011] Mean tdetx,y = (4181.83, 4031.38)
[Wed Nov  2 18:49:20 2011] chipx,y range = (948.00-994.00, 928.00-974.00)
[Wed Nov  2 18:49:20 2011] Size of ../../acisf12328/products/events/fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 183 counts
[Wed Nov  2 18:49:22 2011] rmf not found, will run specextract
[Wed Nov  2 18:49:22 2011] arf not found, will run specextract
[Wed Nov  2 18:49:57 2011] ../../acisf12328/products/spectra/fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src16.warf not found
[Wed Nov  2 18:49:57 2011] ../../acisf12328/products/spectra/fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src16.wrmf not found
[Wed Nov  2 18:49:57 2011] Removal of ../../acisf12328/products/spectra/fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src16.soff failed
[Wed Nov  2 19:51:33 2011] Keeping rmf generated by specextract
[Wed Nov  2 19:51:33 2011] 202.498
[Wed Nov  2 19:53:48 2011] Updating aperture counts using extracted products
[Wed Nov  2 19:53:48 2011] Error reading totcts from fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src16_src.pi.gz
[Wed Nov  2 19:53:49 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov  2 19:53:49 2011] Using photon index=1.80, rate=0.00127, arf fullrun_ccd3_acisf12328_pi14-548_pass1_cl_src16.arf
[Wed Nov  2 19:53:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Nov  2 19:53:50 2011] Updating source flux to 1.9e-14