[Tue Nov 1 22:41:28 2011] Detection parameters: Position = (547.5, 760.7) = 11 14 28.44 -61 16 5.8 Extent = 0.7" x 0.7", rotation angle = 90 degrees Source counts = 15.2 +/- 4.5 Background counts = 4.8 Rate = 9e-05 +/- 3e-05 [Tue Nov 1 22:41:29 2011] Off-axis axis estimate = 4.22' [Wed Nov 2 02:27:41 2011] Using EEF radius (= 0.90 ")to estimate initial spatial extent for simple fitting [Wed Nov 2 02:27:41 2011] Initial guess for spatial extent in simple fitting = 0.90" [Wed Nov 2 02:27:41 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.154 [Wed Nov 2 02:27:41 2011] Giving source the simple spatial ID 77 for pass 0, mean size = 0.90" [Wed Nov 2 04:08:05 2011] fullrun_ccd2_acisf12328_pi14-548_cl_pass0_src77.ximg exists [Wed Nov 2 04:08:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12328_pi14-548_cl_pass0_src77.csv [Wed Nov 2 04:08:05 2011] fullrun_ccd2_acisf12328_pi14-548_cl_pass0_src77_1.ximg exists [Wed Nov 2 04:08:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12328_pi14-548_cl_pass0_src77.csv [Wed Nov 2 04:08:05 2011] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf12328_pi14-548_cl_pass0_src77_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf12328_pi14-548_cl_pass0_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Nov 2 04:08:05 2011] fullrun_ccd2_acisf12328_pi14-548_cl_pass0_tfrozen_src77.ximg exists [Wed Nov 2 04:08:05 2011] fullrun_ccd2_acisf12328_pi14-548_cl_pass0_tfrozen_src77_1.ximg exists [Wed Nov 2 04:08:05 2011] Fit fullrun_ccd2_acisf12328_pi14-548_cl_pass0_tfrozen_src77 appears to have run properly [Wed Nov 2 07:24:27 2011] Spatial fit model total counts = 26.734200, observed total counts = 27.000000 [Wed Nov 2 07:24:27 2011] Offset between fit and detection position for source 90 = 0.583649 pixels [Wed Nov 2 07:24:27 2011] 26.720210 total counts/ 19.276800 bgd. counts: snr = 1.695331 Spatial fit parameters: Offset between fit and detection position for source 90 = 0.583649 pixels Position = (547.5, 761.3) = 11 14 28.47 -61 16 5.8 Extent = 0.2" x 0.2", rotation angle = 0 Source counts = 7.4 +/- 5.2 Background counts = 19.3 Rate = 5e-05 +/- 3e-05 Deleting source due to low Poisson probability