[Tue Nov  1 22:41:28 2011] Detection parameters:
  Position = (773.5, 447.5) = 11 14 12.95 -61 18 39.6
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 19.5 +/- 5.5
  Background counts = 10.5
  Rate = 0.0001 +/- 3e-05

[Tue Nov  1 22:41:29 2011] Off-axis axis estimate = 6.82'
[Wed Nov  2 02:27:41 2011] Using EEF radius (= 2.07 ")to estimate initial spatial extent for simple fitting
[Wed Nov  2 02:27:41 2011] Initial guess for spatial extent in simple fitting = 2.07"
[Wed Nov  2 02:27:41 2011] source mask rpix=4.2, npix_max = 88, mask sum = 61, frac = 0.687
[Wed Nov  2 02:27:41 2011] Giving source the simple spatial ID 57 for pass 0, mean size = 2.07"
[Wed Nov  2 04:08:04 2011] fullrun_ccd2_acisf12328_pi14-548_cl_pass0_src57.ximg exists
[Wed Nov  2 04:08:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12328_pi14-548_cl_pass0_src57.csv
[Wed Nov  2 04:08:04 2011] fullrun_ccd2_acisf12328_pi14-548_cl_pass0_src57_1.ximg exists
[Wed Nov  2 04:08:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12328_pi14-548_cl_pass0_src57.csv
[Wed Nov  2 04:08:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12328_pi14-548_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12328_pi14-548_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov  2 04:08:05 2011] fullrun_ccd2_acisf12328_pi14-548_cl_pass0_tfrozen_src57.ximg exists
[Wed Nov  2 04:08:05 2011] fullrun_ccd2_acisf12328_pi14-548_cl_pass0_tfrozen_src57_1.ximg exists
[Wed Nov  2 04:08:05 2011] Fit fullrun_ccd2_acisf12328_pi14-548_cl_pass0_tfrozen_src57 appears to have run properly
[Wed Nov  2 07:24:27 2011] Spatial fit model total counts = 89.999500, observed total counts = 90.000000
[Wed Nov  2 07:24:27 2011] Offset between fit and detection position for source 77 = 1.596176 pixels
[Wed Nov  2 07:24:27 2011] 89.702200 total counts/ 56.528500 bgd. counts: snr = 4.412251
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 1.596176 pixels
  Position = (773.4, 445.9) = 11 14 12.99 -61 18 40.6
  Extent = 0.9 (0.6-1.9)", rotation angle = 0
  Source counts = 33.2 +/- 9.5
  Background counts = 56.5
  Rate = 0.0002 +/- 6e-05
[Wed Nov  2 07:24:28 2011] Vigneting correction estimate = 1.000000
[Wed Nov  2 07:24:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov  2 07:24:28 2011] Assessing source extent using major axis lower bound
[Wed Nov  2 07:24:28 2011] Source does appear to be extended
[Wed Nov  2 07:24:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov  2 10:37:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov  2 10:37:10 2011] Initial guess for spatial extent in simple fitting = 0.94"
[Wed Nov  2 10:37:10 2011] source mask rpix=1.9, npix_max = 23, mask sum = 9, frac = 0.388
[Wed Nov  2 10:37:10 2011] Skipping simple spatial due to low active detector fraction
[Wed Nov  2 15:48:38 2011] Vigneting correction estimate = 1.000000
[Wed Nov  2 15:48:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov  2 15:48:38 2011] Assessing source extent using major axis lower bound
[Wed Nov  2 15:48:38 2011] Source does appear to be extended
[Wed Nov  2 15:48:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov  2 17:39:03 2011] Writing source region out to fullrun_ccd2_acisf12328_pi14-548_pass1_cl_src77_src.reg
[Wed Nov  2 17:39:03 2011] Extracting stamp from image fullrun_ccd2_acisf12328_pi14-548_cl_sm2.00.img.gz, (730, 403) - (816, 489)
[Wed Nov  2 17:39:03 2011] Writing fullrun_ccd2_acisf12328_pi14-548_pass1_cl_src77.gif
[Wed Nov  2 18:13:26 2011] Size of ../../acisf12328/products/events/fullrun_ccd2_acisf12328_pi14-548_pass1_cl_src77_src.evt.gz[events] = 56 counts
[Wed Nov  2 18:13:26 2011] Mean chipx,y = (770.61, 576.95)
[Wed Nov  2 18:13:26 2011] Mean tdetx,y = (3637.95, 3315.39)
[Wed Nov  2 18:13:26 2011] chipx,y range = (748.00-790.00, 556.00-596.00)
[Wed Nov  2 18:13:26 2011] Size of ../../acisf12328/products/events/fullrun_ccd2_acisf12328_pi14-548_pass1_cl_src77_bgd.evt.gz[events] = 145 counts
[Wed Nov  2 18:13:27 2011] Not generating rmf since there are only 33 counts
[Wed Nov  2 18:13:27 2011] arf not found, will run specextract
[Wed Nov  2 18:13:53 2011] ../../acisf12328/products/spectra/fullrun_ccd2_acisf12328_pi14-548_pass1_cl_src77.warf not found
[Wed Nov  2 18:13:53 2011] ../../acisf12328/products/spectra/fullrun_ccd2_acisf12328_pi14-548_pass1_cl_src77.wrmf not found
[Wed Nov  2 18:13:53 2011] Removal of ../../acisf12328/products/spectra/fullrun_ccd2_acisf12328_pi14-548_pass1_cl_src77.soff failed
[Wed Nov  2 18:39:35 2011] Spectrum 77 has only 33 counts, deleting rmf
[Wed Nov  2 18:39:35 2011] 162.784
[Wed Nov  2 19:53:46 2011] Updating aperture counts using extracted products
[Wed Nov  2 19:53:46 2011] Error reading totcts from fullrun_ccd2_acisf12328_pi14-548_pass1_cl_src77_src.pi.gz
[Wed Nov  2 19:53:47 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov  2 19:53:47 2011] Using photon index=1.80, rate=0.000201, arf fullrun_ccd2_acisf12328_pi14-548_pass1_cl_src77.arf
[Wed Nov  2 19:53:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Nov  2 19:53:47 2011] Updating source flux to 3.7e-15
[Wed Nov  2 19:54:49 2011] Source 77 has fewer than 100.000000 counts, skipping spectral fitting