[Tue Nov  1 22:41:29 2011] Detection parameters:
  Position = (1009.8, 1067.6) = 11 13 56.99 -61 13 34.1
  Extent = 1.7" x 1.3", rotation angle = 127 degrees
  Source counts = 20.2 +/- 5.8
  Background counts = 13.8
  Rate = 0.0001 +/- 4e-05

[Tue Nov  1 22:41:29 2011] Off-axis axis estimate = 8.19'
[Wed Nov  2 02:27:41 2011] Using EEF radius (= 2.97 ")to estimate initial spatial extent for simple fitting
[Wed Nov  2 02:27:41 2011] Initial guess for spatial extent in simple fitting = 2.97"
[Wed Nov  2 02:27:41 2011] source mask rpix=6.0, npix_max = 170, mask sum = 169, frac = 0.990
[Wed Nov  2 02:27:41 2011] Giving source the simple spatial ID 56 for pass 0, mean size = 2.97"
[Wed Nov  2 04:08:04 2011] fullrun_ccd2_acisf12328_pi14-548_cl_pass0_src56.ximg exists
[Wed Nov  2 04:08:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12328_pi14-548_cl_pass0_src56.csv
[Wed Nov  2 04:08:04 2011] fullrun_ccd2_acisf12328_pi14-548_cl_pass0_src56_1.ximg exists
[Wed Nov  2 04:08:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12328_pi14-548_cl_pass0_src56.csv
[Wed Nov  2 04:08:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12328_pi14-548_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12328_pi14-548_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov  2 04:08:05 2011] fullrun_ccd2_acisf12328_pi14-548_cl_pass0_tfrozen_src56.ximg exists
[Wed Nov  2 04:08:05 2011] fullrun_ccd2_acisf12328_pi14-548_cl_pass0_tfrozen_src56_1.ximg exists
[Wed Nov  2 04:08:05 2011] Fit fullrun_ccd2_acisf12328_pi14-548_cl_pass0_tfrozen_src56 appears to have run properly
[Wed Nov  2 07:24:27 2011] Warning: source 56 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 120 at 31.355450 pixels away
[Wed Nov  2 07:24:28 2011] Vigneting correction estimate = 1.000000
[Wed Nov  2 07:24:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov  2 07:24:28 2011] Assessing source extent using major
[Wed Nov  2 07:24:28 2011] Source does appear to be extended
[Wed Nov  2 07:24:28 2011] Computing asymmetry using major and minor axis, asym = 1.33
[Wed Nov  2 10:37:10 2011] Using EEF radius (= 2.97 ")to estimate initial spatial extent for simple fitting
[Wed Nov  2 10:37:10 2011] Initial guess for spatial extent in simple fitting = 2.97"
[Wed Nov  2 10:37:10 2011] source mask rpix=6.0, npix_max = 170, mask sum = 169, frac = 0.990
[Wed Nov  2 10:37:10 2011] Giving source the simple spatial ID 55 for pass 1, mean size = 2.97"
[Wed Nov  2 12:16:33 2011] fullrun_ccd2_acisf12328_pi14-548_cl_pass1_src55.ximg exists
[Wed Nov  2 12:16:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12328_pi14-548_cl_pass1_src55.csv
[Wed Nov  2 12:16:33 2011] fullrun_ccd2_acisf12328_pi14-548_cl_pass1_src55_1.ximg exists
[Wed Nov  2 12:16:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12328_pi14-548_cl_pass1_src55.csv
[Wed Nov  2 12:16:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12328_pi14-548_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12328_pi14-548_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov  2 12:16:33 2011] fullrun_ccd2_acisf12328_pi14-548_cl_pass1_tfrozen_src55.ximg exists
[Wed Nov  2 12:16:33 2011] fullrun_ccd2_acisf12328_pi14-548_cl_pass1_tfrozen_src55_1.ximg exists
[Wed Nov  2 12:16:33 2011] Fit fullrun_ccd2_acisf12328_pi14-548_cl_pass1_tfrozen_src55 appears to have run properly
[Wed Nov  2 15:48:38 2011] Spatial fit model total counts = 99.824000, observed total counts = 100.000000
[Wed Nov  2 15:48:38 2011] Offset between fit and detection position for source 120 = 3.528611 pixels
[Wed Nov  2 15:48:38 2011] 97.820100 total counts/ 41.342000 bgd. counts: snr = 8.783838
Spatial fit parameters:
  Offset between fit and detection position for source 120 = 3.528611 pixels
  Position = (1012.7, 1069.5) = 11 13 56.82 -61 13 33.4
  Extent = 3.9 (1.8-5.9)", rotation angle = 0
  Source counts = 56.5 +/- 9.9
  Background counts = 41.3
  Rate = 0.0003 +/- 6e-05
[Wed Nov  2 15:48:38 2011] Vigneting correction estimate = 1.000000
[Wed Nov  2 15:48:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov  2 15:48:38 2011] Assessing source extent using major axis lower bound
[Wed Nov  2 15:48:38 2011] Source does appear to be extended
[Wed Nov  2 15:48:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov  2 17:39:03 2011] Writing source region out to fullrun_ccd2_acisf12328_pi14-548_pass1_cl_src120_src.reg
[Wed Nov  2 17:39:03 2011] Extracting stamp from image fullrun_ccd2_acisf12328_pi14-548_cl_sm2.00.img.gz, (834, 891) - (1191, 1248)
[Wed Nov  2 17:39:03 2011] Writing fullrun_ccd2_acisf12328_pi14-548_pass1_cl_src120.gif
[Wed Nov  2 18:13:02 2011] Size of ../../acisf12328/products/events/fullrun_ccd2_acisf12328_pi14-548_pass1_cl_src120_src.evt.gz[events] = 168 counts
[Wed Nov  2 18:13:02 2011] Mean chipx,y = (331.51, 72.62)
[Wed Nov  2 18:13:02 2011] Mean tdetx,y = (3133.62, 3754.49)
[Wed Nov  2 18:13:02 2011] chipx,y range = (288.00-372.00, 25.00-115.00)
[Wed Nov  2 18:13:02 2011] Size of ../../acisf12328/products/events/fullrun_ccd2_acisf12328_pi14-548_pass1_cl_src120_bgd.evt.gz[events] = 1275 counts
[Wed Nov  2 18:13:04 2011] Not generating rmf since there are only 56 counts
[Wed Nov  2 18:13:04 2011] arf not found, will run specextract
[Wed Nov  2 18:13:17 2011] ../../acisf12328/products/spectra/fullrun_ccd2_acisf12328_pi14-548_pass1_cl_src120.warf not found
[Wed Nov  2 18:13:17 2011] ../../acisf12328/products/spectra/fullrun_ccd2_acisf12328_pi14-548_pass1_cl_src120.wrmf not found
[Wed Nov  2 18:13:17 2011] Removal of ../../acisf12328/products/spectra/fullrun_ccd2_acisf12328_pi14-548_pass1_cl_src120.soff failed
[Wed Nov  2 18:39:35 2011] Spectrum 120 has only 56 counts, deleting rmf
[Wed Nov  2 18:39:35 2011] 165.357
[Wed Nov  2 19:53:46 2011] Updating aperture counts using extracted products
[Wed Nov  2 19:53:46 2011] Error reading totcts from fullrun_ccd2_acisf12328_pi14-548_pass1_cl_src120_src.pi.gz
[Wed Nov  2 19:53:47 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov  2 19:53:47 2011] Using photon index=1.80, rate=0.000342, arf fullrun_ccd2_acisf12328_pi14-548_pass1_cl_src120.arf
[Wed Nov  2 19:53:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Nov  2 19:53:47 2011] Updating source flux to 6.1e-15
[Wed Nov  2 19:54:49 2011] Source 120 has fewer than 100.000000 counts, skipping spectral fitting