[Tue Nov  1 22:40:49 2011] Detection parameters:
  Position = (1230.1, 713.8) = 11 15 16.96 -61 12 52.2
  Extent = 0.5" x 0.5", rotation angle = 118 degrees
  Source counts = 12.0 +/- 4.1
  Background counts = 5.0
  Rate = 7e-05 +/- 2e-05

[Tue Nov  1 22:40:50 2011] Off-axis axis estimate = 3.10'
[Wed Nov  2 00:45:59 2011] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Wed Nov  2 00:45:59 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Wed Nov  2 00:45:59 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.350
[Wed Nov  2 00:45:59 2011] Giving source the simple spatial ID 97 for pass 0, mean size = 0.60"
[Wed Nov  2 02:27:40 2011] fullrun_ccd1_acisf12328_pi14-548_cl_pass0_src97.ximg exists
[Wed Nov  2 02:27:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12328_pi14-548_cl_pass0_src97.csv
[Wed Nov  2 02:27:40 2011] fullrun_ccd1_acisf12328_pi14-548_cl_pass0_src97_1.ximg exists
[Wed Nov  2 02:27:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12328_pi14-548_cl_pass0_src97.csv
[Wed Nov  2 02:27:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12328_pi14-548_cl_pass0_src97_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12328_pi14-548_cl_pass0_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov  2 02:27:41 2011] fullrun_ccd1_acisf12328_pi14-548_cl_pass0_tfrozen_src97.ximg exists
[Wed Nov  2 02:27:41 2011] fullrun_ccd1_acisf12328_pi14-548_cl_pass0_tfrozen_src97_1.ximg exists
[Wed Nov  2 02:27:41 2011] Fit fullrun_ccd1_acisf12328_pi14-548_cl_pass0_tfrozen_src97 appears to have run properly
[Wed Nov  2 07:24:13 2011] Spatial fit model total counts = 45.997000, observed total counts = 46.000000
[Wed Nov  2 07:24:13 2011] Offset between fit and detection position for source 111 = 0.667400 pixels
[Wed Nov  2 07:24:13 2011] 43.586200 total counts/ 35.888700 bgd. counts: snr = 1.284904
Spatial fit parameters:
  Offset between fit and detection position for source 111 = 0.667400 pixels
  Position = (1230.5, 714.3) = 11 15 16.96 -61 12 52.1
  Extent = 0.3 (0.2-0.7)", rotation angle = 0
  Source counts = 7.7 +/- 6.6
  Background counts = 35.9
  Rate = 5e-05 +/- 4e-05
  Deleting source due to low Poisson probability