[Tue Nov  1 22:40:46 2011] Detection parameters:
  Position = (1166.4, 444.9) = 11 15 21.31 -61 15 4.4
  Extent = 0.5" x 0.5", rotation angle = 143 degrees
  Source counts = 2753.8 +/- 52.9
  Background counts = 43.2
  Rate = 0.02 +/- 0.0003

[Tue Nov  1 22:40:50 2011] Off-axis axis estimate = 2.22'
[Wed Nov  2 00:45:59 2011] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Wed Nov  2 00:45:59 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Wed Nov  2 00:45:59 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.111
[Wed Nov  2 00:45:59 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.45"
[Wed Nov  2 02:27:39 2011] fullrun_ccd1_acisf12328_pi14-548_cl_pass0_src1.ximg exists
[Wed Nov  2 02:27:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12328_pi14-548_cl_pass0_src1.csv
[Wed Nov  2 02:27:39 2011] fullrun_ccd1_acisf12328_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Nov  2 02:27:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12328_pi14-548_cl_pass0_src1.csv
[Wed Nov  2 02:27:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12328_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12328_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov  2 02:27:40 2011] fullrun_ccd1_acisf12328_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Nov  2 02:27:40 2011] fullrun_ccd1_acisf12328_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Nov  2 02:27:40 2011] Fit fullrun_ccd1_acisf12328_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Nov  2 07:24:13 2011] Spatial fit model total counts = 2801.000000, observed total counts = 2801.000000
[Wed Nov  2 07:24:13 2011] Offset between fit and detection position for source 1 = 0.707247 pixels
[Wed Nov  2 07:24:13 2011] 2806.629000 total counts/ 146.089000 bgd. counts: snr = 220.120776
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.707247 pixels
  Position = (1166.9, 445.4) = 11 15 21.31 -61 15 4.4
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 2660.5 +/- 53.0
  Background counts = 146.1
  Rate = 0.02 +/- 0.0003
[Wed Nov  2 07:24:13 2011] Vigneting correction estimate = 1.000000
[Wed Nov  2 07:24:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov  2 07:24:13 2011] Assessing source extent using major axis lower bound
[Wed Nov  2 07:24:13 2011] Source does appear to be extended
[Wed Nov  2 07:24:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov  2 08:58:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov  2 08:58:28 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Wed Nov  2 08:58:28 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.037
[Wed Nov  2 08:58:28 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.48"
[Wed Nov  2 10:37:09 2011] fullrun_ccd1_acisf12328_pi14-548_cl_pass1_src1.ximg exists
[Wed Nov  2 10:37:09 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf12328_pi14-548_cl_pass1_src1.csv
[Wed Nov  2 10:37:09 2011] fullrun_ccd1_acisf12328_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Nov  2 10:37:09 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf12328_pi14-548_cl_pass1_src1.csv
[Wed Nov  2 10:37:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12328_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12328_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov  2 10:37:09 2011] fullrun_ccd1_acisf12328_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Nov  2 10:37:09 2011] fullrun_ccd1_acisf12328_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Nov  2 10:37:09 2011] Fit fullrun_ccd1_acisf12328_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Nov  2 15:48:25 2011] Spatial fit model total counts = 2800.990000, observed total counts = 2801.000000
[Wed Nov  2 15:48:25 2011] Offset between fit and detection position for source 1 = 0.001429 pixels
[Wed Nov  2 15:48:25 2011] 2803.478000 total counts/ 143.118000 bgd. counts: snr = 222.378748
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001429 pixels
  Position = (1166.9, 445.4) = 11 15 21.31 -61 15 4.4
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 2660.4 +/- 52.9
  Background counts = 143.1
  Rate = 0.02 +/- 0.0003
[Wed Nov  2 15:48:25 2011] Vigneting correction estimate = 1.000000
[Wed Nov  2 15:48:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov  2 15:48:25 2011] Assessing source extent using major axis lower bound
[Wed Nov  2 15:48:25 2011] Source does appear to be extended
[Wed Nov  2 15:48:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov  2 16:36:32 2011] Writing source region out to fullrun_ccd1_acisf12328_pi14-548_pass1_cl_src1_src.reg
[Wed Nov  2 16:36:32 2011] Extracting stamp from image fullrun_ccd1_acisf12328_pi14-548_cl_sm2.00.img.gz, (1145, 424) - (1189, 467)
[Wed Nov  2 16:36:32 2011] Writing fullrun_ccd1_acisf12328_pi14-548_pass1_cl_src1.gif
[Wed Nov  2 16:36:40 2011] Size of ../../acisf12328/products/events/fullrun_ccd1_acisf12328_pi14-548_pass1_cl_src1_src.evt.gz[events] = 2700 counts
[Wed Nov  2 16:36:40 2011] Mean chipx,y = (72.14, 815.73)
[Wed Nov  2 16:36:40 2011] Mean tdetx,y = (4316.27, 4179.14)
[Wed Nov  2 16:36:40 2011] chipx,y range = (50.00-93.00, 795.00-839.00)
[Wed Nov  2 16:36:40 2011] Size of ../../acisf12328/products/events/fullrun_ccd1_acisf12328_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 109 counts
[Wed Nov  2 16:36:41 2011] rmf not found, will run specextract
[Wed Nov  2 16:36:41 2011] arf not found, will run specextract
[Wed Nov  2 16:37:06 2011] ../../acisf12328/products/spectra/fullrun_ccd1_acisf12328_pi14-548_pass1_cl_src1.warf not found
[Wed Nov  2 16:37:06 2011] ../../acisf12328/products/spectra/fullrun_ccd1_acisf12328_pi14-548_pass1_cl_src1.wrmf not found
[Wed Nov  2 16:37:06 2011] Removal of ../../acisf12328/products/spectra/fullrun_ccd1_acisf12328_pi14-548_pass1_cl_src1.soff failed
[Wed Nov  2 17:38:59 2011] Keeping rmf generated by specextract
[Wed Nov  2 17:38:59 2011] 182.591
[Wed Nov  2 19:53:42 2011] Updating aperture counts using extracted products
[Wed Nov  2 19:53:42 2011] Error reading totcts from fullrun_ccd1_acisf12328_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Nov  2 19:53:43 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov  2 19:53:43 2011] Using photon index=1.80, rate=0.0161, arf fullrun_ccd1_acisf12328_pi14-548_pass1_cl_src1.arf
[Wed Nov  2 19:53:43 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Nov  2 19:53:43 2011] Updating source flux to 2.7e-13
[Wed Nov  2 19:54:49 2011] Reading fit data from acisf12328/analysis//spectral/fullrun_ccd1_acisf12328_pi14-548_pass1_cl_src1_pl.csv
[Wed Nov  2 19:54:49 2011] Spectral fit parameter nH value = 1.3086e+22
[Wed Nov  2 19:54:49 2011] Spectral fit parameter PhoIndex value = 2.96037
[Wed Nov  2 19:54:49 2011] Failed to get F(0.3-8.0) from acisf12328/analysis//spectral/fullrun_ccd1_acisf12328_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Nov  2 19:54:49 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov  2 19:54:49 2011] Using Nh = 1.3e+22, photon index=2.96, rate=0.0161, arf fullrun_ccd1_acisf12328_pi14-548_pass1_cl_src1.arf
[Wed Nov  2 19:54:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Nov  2 19:54:49 2011] Updating source flux to 1.8e-13