[Tue Nov  1 22:40:11 2011] Detection parameters:
  Position = (843.3, 273.5) = 11 14 41.66 -61 12 35.0
  Extent = 0.5" x 0.5", rotation angle = 53 degrees
  Source counts = 10.1 +/- 3.6
  Background counts = 2.9
  Rate = 6e-05 +/- 2e-05

[Tue Nov  1 22:40:11 2011] Off-axis axis estimate = 3.90'
[Tue Nov  1 22:53:26 2011] Using EEF radius (= 0.80 ")to estimate initial spatial extent for simple fitting
[Tue Nov  1 22:53:26 2011] Initial guess for spatial extent in simple fitting = 0.80"
[Tue Nov  1 22:53:26 2011] source mask rpix=1.6, npix_max = 18, mask sum = 18, frac = 0.997
[Tue Nov  1 22:53:26 2011] Giving source the simple spatial ID 82 for pass 0, mean size = 0.80"
[Wed Nov  2 00:45:58 2011] fullrun_ccd0_acisf12328_pi14-548_cl_pass0_src82.ximg exists
[Wed Nov  2 00:45:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12328_pi14-548_cl_pass0_src82.csv
[Wed Nov  2 00:45:58 2011] fullrun_ccd0_acisf12328_pi14-548_cl_pass0_src82_1.ximg exists
[Wed Nov  2 00:45:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12328_pi14-548_cl_pass0_src82.csv
[Wed Nov  2 00:45:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12328_pi14-548_cl_pass0_src82_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12328_pi14-548_cl_pass0_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov  2 00:45:58 2011] fullrun_ccd0_acisf12328_pi14-548_cl_pass0_tfrozen_src82.ximg exists
[Wed Nov  2 00:45:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12328_pi14-548_cl_pass0_tfrozen_src82.csv
[Wed Nov  2 00:45:58 2011] fullrun_ccd0_acisf12328_pi14-548_cl_pass0_tfrozen_src82_1.ximg exists
[Wed Nov  2 00:45:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12328_pi14-548_cl_pass0_tfrozen_src82.csv
[Wed Nov  2 00:45:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12328_pi14-548_cl_pass0_tfrozen_src82_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12328_pi14-548_cl_pass0_tfrozen_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov  2 07:23:54 2011] Spatial fit model total counts = 21.082700, observed total counts = 30.000000
[Wed Nov  2 07:23:54 2011] Poor agreement between spatial fit and data for source 90
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Nov  2 07:23:54 2011] Vigneting correction estimate = 1.000000
[Wed Nov  2 07:23:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov  2 07:23:54 2011] Assessing source extent using major
[Wed Nov  2 07:23:54 2011] Source does appear to be extended
[Wed Nov  2 07:23:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov  2 07:23:54 2011] Deleting source due to low Poisson probability 0.9