[Tue Jul  9 07:23:19 2013] Detection parameters:
  Position = (667.2, 1199.3) = 12 46 50.61 -2 8 11.1
  Extent = 0.7" x 0.5", rotation angle = 159 degrees
  Source counts = 10.5 +/- 3.5
  Background counts = 1.5
  Rate = 0.0001 +/- 4e-05

[Tue Jul  9 07:23:19 2013] Off-axis axis estimate = 2.81'
[Tue Jul  9 08:45:29 2013] Using EEF radius (= 0.54 ")to estimate initial spatial extent for simple fitting
[Tue Jul  9 08:45:29 2013] Initial guess for spatial extent in simple fitting = 0.54"
[Tue Jul  9 08:45:29 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.873
[Tue Jul  9 08:45:29 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 0.54"
[Tue Jul  9 09:08:55 2013] fullrun_ccd6_acisf12318_pi14-548_cl_pass0_src16.ximg exists
[Tue Jul  9 09:08:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12318_pi14-548_cl_pass0_src16.csv
[Tue Jul  9 09:08:55 2013] fullrun_ccd6_acisf12318_pi14-548_cl_pass0_src16_1.ximg exists
[Tue Jul  9 09:08:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12318_pi14-548_cl_pass0_src16.csv
[Tue Jul  9 09:08:55 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12318_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12318_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  9 09:08:55 2013] fullrun_ccd6_acisf12318_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Tue Jul  9 09:08:55 2013] fullrun_ccd6_acisf12318_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Jul  9 09:08:55 2013] Fit fullrun_ccd6_acisf12318_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Tue Jul  9 09:39:30 2013] Spatial fit model total counts = 12.259400, observed total counts = 14.000000
[Tue Jul  9 09:39:30 2013] Offset between fit and detection position for source 14 = 0.686987 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.686987 pixels
  Position = (667.6, 1199.9) = 12 46 50.62 -2 8 11.0
  Extent = 1.0 (0.7-1.5)" x 0.4 (0.3-0.6)", rotation angle = 21 (5-39) degrees
  Source counts = 11.6 +/- 3.4
  Background counts = 0.0
  Rate = 0.0001 +/- 4e-05
[Tue Jul  9 09:39:31 2013] Vigneting correction estimate = 1.000000
[Tue Jul  9 09:39:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  9 09:39:31 2013] Assessing source extent using major axis lower bound
[Tue Jul  9 09:39:31 2013] Source does appear to be extended
[Tue Jul  9 09:39:31 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.28
[Tue Jul  9 10:38:32 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul  9 10:38:32 2013] Initial guess for spatial extent in simple fitting = 0.71"
[Tue Jul  9 10:38:32 2013] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.064
[Tue Jul  9 10:38:32 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 0.71"
[Tue Jul  9 11:04:45 2013] fullrun_ccd6_acisf12318_pi14-548_cl_pass1_src16.ximg exists
[Tue Jul  9 11:04:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12318_pi14-548_cl_pass1_src16.csv
[Tue Jul  9 11:04:45 2013] fullrun_ccd6_acisf12318_pi14-548_cl_pass1_src16_1.ximg exists
[Tue Jul  9 11:04:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12318_pi14-548_cl_pass1_src16.csv
[Tue Jul  9 11:04:45 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12318_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12318_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  9 11:04:45 2013] fullrun_ccd6_acisf12318_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Tue Jul  9 11:04:45 2013] fullrun_ccd6_acisf12318_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Tue Jul  9 11:04:45 2013] Fit fullrun_ccd6_acisf12318_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Tue Jul  9 11:33:28 2013] Spatial fit model total counts = 13.946500, observed total counts = 15.000000
[Tue Jul  9 11:33:28 2013] Offset between fit and detection position for source 14 = 0.205740 pixels
[Tue Jul  9 11:33:28 2013] 13.670310 total counts/ 2.209410 bgd. counts: snr = 7.710465
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.205740 pixels
  Position = (667.8, 1199.8) = 12 46 50.61 -2 8 11.1
  Extent = 1.0 (0.7-1.5)" x 0.4 (0.3-0.5)", rotation angle = 23 (1-37) degrees
  Source counts = 11.5 +/- 3.7
  Background counts = 2.2
  Rate = 0.0001 +/- 5e-05
[Tue Jul  9 11:33:28 2013] Vigneting correction estimate = 1.000000
[Tue Jul  9 11:33:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  9 11:33:28 2013] Assessing source extent using major axis lower bound
[Tue Jul  9 11:33:28 2013] Source does appear to be extended
[Tue Jul  9 11:33:28 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.31
[Tue Jul  9 11:38:59 2013] Writing source region out to fullrun_ccd6_acisf12318_pi14-548_pass1_cl_src14_src.reg
[Tue Jul  9 11:38:59 2013] Extracting stamp from image fullrun_ccd6_acisf12318_pi14-548_cl_sm2.00.img.gz, (622, 1154) - (714, 1246)
[Tue Jul  9 11:38:59 2013] Writing fullrun_ccd6_acisf12318_pi14-548_pass1_cl_src14.gif
[Tue Jul  9 11:47:47 2013] Size of ../../acisf12318/products/events/fullrun_ccd6_acisf12318_pi14-548_pass1_cl_src14_src.evt.gz[events] = 13 counts
[Tue Jul  9 11:47:47 2013] Mean chipx,y = (974.77, 725.00)
[Tue Jul  9 11:47:47 2013] Mean tdetx,y = (3849.77, 2427.00)
[Tue Jul  9 11:47:47 2013] chipx,y range = (957.00-994.00, 711.00-743.00)
[Tue Jul  9 11:47:47 2013] Size of ../../acisf12318/products/events/fullrun_ccd6_acisf12318_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 55 counts
[Tue Jul  9 11:47:49 2013] Not generating rmf since there are only 11 counts
[Tue Jul  9 11:47:49 2013] arf not found, will run specextract
[Tue Jul  9 11:48:18 2013] ../../acisf12318/products/spectra/fullrun_ccd6_acisf12318_pi14-548_pass1_cl_src14.warf not found
[Tue Jul  9 11:48:18 2013] ../../acisf12318/products/spectra/fullrun_ccd6_acisf12318_pi14-548_pass1_cl_src14.wrmf not found
[Tue Jul  9 11:48:18 2013] Removal of ../../acisf12318/products/spectra/fullrun_ccd6_acisf12318_pi14-548_pass1_cl_src14.soff failed
[Tue Jul  9 11:48:26 2013] Spectrum 14 has only 11 counts, deleting rmf
[Tue Jul  9 11:48:26 2013] 205.818
[Tue Jul  9 11:58:04 2013] Updating aperture counts using extracted products
[Tue Jul  9 11:58:04 2013] Total counts from fullrun_ccd6_acisf12318_pi14-548_pass1_cl_src14_src.pi.gz = 13.00
[Tue Jul  9 11:58:04 2013] Total counts from fullrun_ccd6_acisf12318_pi14-548_pass1_cl_src14_bgd.pi.gz = 55.00
[Tue Jul  9 11:58:04 2013] Got source and background scale factors 0.000001, 0.000037
[Tue Jul  9 11:58:04 2013] User source parameters:
  Position = (667.8, 1199.8) = 12 46 50.61 -2 8 11.1
  Extent = 1.0 (0.7-1.5)" x 0.4 (0.3-0.5)", rotation angle = 23 (1-37) degrees
  Source aperture counts = 11.3 +/- 4.7
  Background aperture counts = 1.7
  Rate = 0.0001 +/- 6e-05

[Tue Jul  9 11:58:04 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jul  9 11:58:04 2013] Using photon index=1.80, rate=0.000145, arf fullrun_ccd6_acisf12318_pi14-548_pass1_cl_src14.arf
[Tue Jul  9 11:58:04 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jul  9 11:58:04 2013] Updating source flux to 1.6e-15
[Tue Jul  9 11:58:30 2013] Source 14 has fewer than 100.000000 counts, skipping spectral fitting