[Wed May  8 19:25:50 2013] Detection parameters:
  Position = (985.8, 1001.3) = 2 25 39.86 12 53 16.9
  Extent = 0.6" x 0.5", rotation angle = 68 degrees
  Source counts = 20.0 +/- 4.6
  Background counts = 1.0
  Rate = 0.0005 +/- 0.0001

[Wed May  8 19:25:51 2013] Off-axis axis estimate = 2.12'
[Wed May  8 20:51:44 2013] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Wed May  8 20:51:44 2013] Initial guess for spatial extent in simple fitting = 0.44"
[Wed May  8 20:51:44 2013] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.148
[Wed May  8 20:51:44 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 0.44"
[Wed May  8 21:23:12 2013] fullrun_ccd7_acisf12315_pi14-548_cl_pass0_src18.ximg exists
[Wed May  8 21:23:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12315_pi14-548_cl_pass0_src18.csv
[Wed May  8 21:23:12 2013] fullrun_ccd7_acisf12315_pi14-548_cl_pass0_src18_1.ximg exists
[Wed May  8 21:23:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12315_pi14-548_cl_pass0_src18.csv
[Wed May  8 21:23:12 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12315_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12315_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 21:23:12 2013] fullrun_ccd7_acisf12315_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Wed May  8 21:23:12 2013] fullrun_ccd7_acisf12315_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Wed May  8 21:23:12 2013] Fit fullrun_ccd7_acisf12315_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Wed May  8 21:23:21 2013] Spatial fit model total counts = 20.422400, observed total counts = 23.000000
[Wed May  8 21:23:21 2013] Offset between fit and detection position for source 23 = 0.705602 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.705602 pixels
  Position = (986.3, 1001.7) = 2 25 39.86 12 53 16.9
  Extent = 0.8 (0.6-1.1)" x 0.3 (0.2-0.4)", rotation angle = 111 (99-124) degrees
  Source counts = 20.4 +/- 4.5
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Wed May  8 21:23:21 2013] Vigneting correction estimate = 1.000000
[Wed May  8 21:23:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 21:23:21 2013] Assessing source extent using major axis lower bound
[Wed May  8 21:23:21 2013] Source does appear to be extended
[Wed May  8 21:23:21 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.51
[Wed May  8 21:23:21 2013] Source is asymmetric
[Wed May  8 22:36:17 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  8 22:36:17 2013] Initial guess for spatial extent in simple fitting = 0.53"
[Wed May  8 22:36:17 2013] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.910
[Wed May  8 22:36:17 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 0.53"
[Wed May  8 23:04:00 2013] fullrun_ccd7_acisf12315_pi14-548_cl_pass1_src18.ximg exists
[Wed May  8 23:04:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12315_pi14-548_cl_pass1_src18.csv
[Wed May  8 23:04:00 2013] fullrun_ccd7_acisf12315_pi14-548_cl_pass1_src18_1.ximg exists
[Wed May  8 23:04:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12315_pi14-548_cl_pass1_src18.csv
[Wed May  8 23:04:00 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12315_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12315_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 23:04:00 2013] fullrun_ccd7_acisf12315_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Wed May  8 23:04:00 2013] fullrun_ccd7_acisf12315_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Wed May  8 23:04:00 2013] Fit fullrun_ccd7_acisf12315_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Wed May  8 23:04:09 2013] Spatial fit model total counts = 20.973000, observed total counts = 23.000000
[Wed May  8 23:04:09 2013] Offset between fit and detection position for source 23 = 0.035648 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.035648 pixels
  Position = (986.4, 1001.8) = 2 25 39.86 12 53 16.9
  Extent = 0.8 (0.6-1.1)" x 0.3 (0.2-0.4)", rotation angle = 112 (100-123) degrees
  Source counts = 20.8 +/- 4.6
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Wed May  8 23:04:09 2013] Vigneting correction estimate = 1.000000
[Wed May  8 23:04:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 23:04:09 2013] Assessing source extent using major axis lower bound
[Wed May  8 23:04:09 2013] Source does appear to be extended
[Wed May  8 23:04:09 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.40
[Wed May  8 23:21:22 2013] Writing source region out to fullrun_ccd7_acisf12315_pi14-548_pass1_cl_src23_src.reg
[Wed May  8 23:21:22 2013] Extracting stamp from image fullrun_ccd7_acisf12315_pi14-548_cl_sm2.00.img.gz, (951, 967) - (1021, 1037)
[Wed May  8 23:21:22 2013] Writing fullrun_ccd7_acisf12315_pi14-548_pass1_cl_src23.gif
[Wed May  8 23:26:12 2013] Size of ../../acisf12315/products/events/fullrun_ccd7_acisf12315_pi14-548_pass1_cl_src23_src.evt.gz[events] = 21 counts
[Wed May  8 23:26:12 2013] Mean chipx,y = (69.48, 281.81)
[Wed May  8 23:26:12 2013] Mean tdetx,y = (3986.48, 1983.81)
[Wed May  8 23:26:12 2013] chipx,y range = (48.00-83.00, 264.00-298.00)
[Wed May  8 23:26:12 2013] Size of ../../acisf12315/products/events/fullrun_ccd7_acisf12315_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 27 counts
[Wed May  8 23:26:14 2013] Not generating rmf since there are only 20 counts
[Wed May  8 23:26:14 2013] arf not found, will run specextract
[Wed May  8 23:26:21 2013] ../../acisf12315/products/spectra/fullrun_ccd7_acisf12315_pi14-548_pass1_cl_src23.warf not found
[Wed May  8 23:26:21 2013] ../../acisf12315/products/spectra/fullrun_ccd7_acisf12315_pi14-548_pass1_cl_src23.wrmf not found
[Wed May  8 23:26:21 2013] Removal of ../../acisf12315/products/spectra/fullrun_ccd7_acisf12315_pi14-548_pass1_cl_src23.soff failed
[Wed May  8 23:32:23 2013] Spectrum 23 has only 21 counts, deleting rmf
[Wed May  8 23:32:23 2013] 227.608
[Wed May  8 23:32:32 2013] Updating aperture counts using extracted products
[Wed May  8 23:32:32 2013] Total counts from fullrun_ccd7_acisf12315_pi14-548_pass1_cl_src23_src.pi.gz = 21.00
[Wed May  8 23:32:32 2013] Total counts from fullrun_ccd7_acisf12315_pi14-548_pass1_cl_src23_bgd.pi.gz = 27.00
[Wed May  8 23:32:32 2013] Got source and background scale factors 0.000001, 0.000020
[Wed May  8 23:32:32 2013] User source parameters:
  Position = (986.4, 1001.8) = 2 25 39.86 12 53 16.9
  Extent = 0.8 (0.6-1.1)" x 0.3 (0.2-0.4)", rotation angle = 112 (100-123) degrees
  Source aperture counts = 20.1 +/- 5.7
  Background aperture counts = 0.9
  Rate = 0.0005 +/- 0.0001

[Wed May  8 23:32:35 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 23:32:35 2013] Using photon index=1.80, rate=0.00053, arf fullrun_ccd7_acisf12315_pi14-548_pass1_cl_src23.arf
[Wed May  8 23:32:35 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  8 23:32:35 2013] Updating source flux to 4.1e-15
[Wed May  8 23:32:55 2013] Source 23 has fewer than 100.000000 counts, skipping spectral fitting