[Wed May  8 19:25:21 2013] Detection parameters:
  Position = (816.3, 369.8) = 2 25 35.94 12 56 22.1
  Extent = 0.7" x 0.5", rotation angle = 125 degrees
  Source counts = 26.0 +/- 5.2
  Background counts = 1.0
  Rate = 0.0007 +/- 0.0001

[Wed May  8 19:25:21 2013] Off-axis axis estimate = 4.70'
[Wed May  8 20:45:24 2013] Using EEF radius (= 1.06 ")to estimate initial spatial extent for simple fitting
[Wed May  8 20:45:24 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  8 20:45:24 2013] Initial guess for spatial extent in simple fitting = 1.06"
[Wed May  8 20:45:24 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.882
[Wed May  8 20:45:24 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 1.06"
[Wed May  8 20:51:44 2013] fullrun_ccd6_acisf12315_pi14-548_cl_pass0_src1.ximg exists
[Wed May  8 20:51:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12315_pi14-548_cl_pass0_src1.csv
[Wed May  8 20:51:44 2013] fullrun_ccd6_acisf12315_pi14-548_cl_pass0_src1_1.ximg exists
[Wed May  8 20:51:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12315_pi14-548_cl_pass0_src1.csv
[Wed May  8 20:51:44 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12315_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12315_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 20:51:44 2013] fullrun_ccd6_acisf12315_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed May  8 20:51:44 2013] fullrun_ccd6_acisf12315_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May  8 20:51:44 2013] Fit fullrun_ccd6_acisf12315_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May  8 21:23:17 2013] Spatial fit model total counts = 24.782800, observed total counts = 30.000000
[Wed May  8 21:23:17 2013] Offset between fit and detection position for source 4 = 0.670110 pixels
[Wed May  8 21:23:17 2013] 26.576001 total counts/ 0.000401 bgd. counts: snr = 1326.518555
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.670110 pixels
  Position = (816.9, 370.1) = 2 25 35.94 12 56 22.0
  Extent = 1.7 (1.5-2.1)" x 0.6 (0.3-0.8)", rotation angle = 80 (69-91) degrees
  Source counts = 26.6 +/- 5.2
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0001
[Wed May  8 21:23:17 2013] Vigneting correction estimate = 1.000000
[Wed May  8 21:23:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 21:23:17 2013] Assessing source extent using major axis lower bound
[Wed May  8 21:23:17 2013] Source does appear to be extended
[Wed May  8 21:23:17 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.81
[Wed May  8 21:23:17 2013] Source is asymmetric
[Wed May  8 22:30:31 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  8 22:30:31 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  8 22:30:31 2013] Initial guess for spatial extent in simple fitting = 1.18"
[Wed May  8 22:30:31 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.069
[Wed May  8 22:30:31 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 1.18"
[Wed May  8 22:36:17 2013] fullrun_ccd6_acisf12315_pi14-548_cl_pass1_src1.ximg exists
[Wed May  8 22:36:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12315_pi14-548_cl_pass1_src1.csv
[Wed May  8 22:36:17 2013] fullrun_ccd6_acisf12315_pi14-548_cl_pass1_src1_1.ximg exists
[Wed May  8 22:36:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12315_pi14-548_cl_pass1_src1.csv
[Wed May  8 22:36:17 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12315_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12315_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 22:36:17 2013] fullrun_ccd6_acisf12315_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed May  8 22:36:17 2013] fullrun_ccd6_acisf12315_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May  8 22:36:17 2013] Fit fullrun_ccd6_acisf12315_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed May  8 23:04:06 2013] Spatial fit model total counts = 26.696600, observed total counts = 30.000000
[Wed May  8 23:04:06 2013] Offset between fit and detection position for source 4 = 0.317881 pixels
[Wed May  8 23:04:06 2013] 27.755868 total counts/ 0.069768 bgd. counts: snr = 104.817464
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.317881 pixels
  Position = (816.9, 370.4) = 2 25 35.94 12 56 22.2
  Extent = 1.7 (1.4-2.4)" x 0.7 (0.4-0.9)", rotation angle = 82 (67-96) degrees
  Source counts = 27.7 +/- 5.3
  Background counts = 0.1
  Rate = 0.0007 +/- 0.0001
[Wed May  8 23:04:06 2013] Vigneting correction estimate = 1.000000
[Wed May  8 23:04:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 23:04:06 2013] Assessing source extent using major axis lower bound
[Wed May  8 23:04:06 2013] Source does appear to be extended
[Wed May  8 23:04:06 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.63
[Wed May  8 23:04:06 2013] Source is asymmetric
[Wed May  8 23:15:48 2013] Writing source region out to fullrun_ccd6_acisf12315_pi14-548_pass1_cl_src4_src.reg
[Wed May  8 23:15:48 2013] Extracting stamp from image fullrun_ccd6_acisf12315_pi14-548_cl_sm2.00.img.gz, (738, 291) - (896, 449)
[Wed May  8 23:15:48 2013] Writing fullrun_ccd6_acisf12315_pi14-548_pass1_cl_src4.gif
[Wed May  8 23:15:49 2013] Size of ../../acisf12315/products/events/fullrun_ccd6_acisf12315_pi14-548_pass1_cl_src4_src.evt.gz[events] = 29 counts
[Wed May  8 23:15:49 2013] Mean chipx,y = (714.34, 274.34)
[Wed May  8 23:15:49 2013] Mean tdetx,y = (3589.34, 1976.34)
[Wed May  8 23:15:49 2013] chipx,y range = (696.00-732.00, 258.00-289.00)
[Wed May  8 23:15:49 2013] Size of ../../acisf12315/products/events/fullrun_ccd6_acisf12315_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 49 counts
[Wed May  8 23:15:50 2013] Not generating rmf since there are only 27 counts
[Wed May  8 23:15:50 2013] arf not found, will run specextract
[Wed May  8 23:16:15 2013] ../../acisf12315/products/spectra/fullrun_ccd6_acisf12315_pi14-548_pass1_cl_src4.warf not found
[Wed May  8 23:16:15 2013] ../../acisf12315/products/spectra/fullrun_ccd6_acisf12315_pi14-548_pass1_cl_src4.wrmf not found
[Wed May  8 23:16:15 2013] Removal of ../../acisf12315/products/spectra/fullrun_ccd6_acisf12315_pi14-548_pass1_cl_src4.soff failed
[Wed May  8 23:21:21 2013] Spectrum 4 has only 28 counts, deleting rmf
[Wed May  8 23:21:21 2013] 190.073
[Wed May  8 23:32:29 2013] Updating aperture counts using extracted products
[Wed May  8 23:32:29 2013] Total counts from fullrun_ccd6_acisf12315_pi14-548_pass1_cl_src4_src.pi.gz = 29.00
[Wed May  8 23:32:29 2013] Total counts from fullrun_ccd6_acisf12315_pi14-548_pass1_cl_src4_bgd.pi.gz = 49.00
[Wed May  8 23:32:29 2013] Got source and background scale factors 0.000004, 0.000108
[Wed May  8 23:32:29 2013] User source parameters:
  Position = (816.9, 370.4) = 2 25 35.94 12 56 22.2
  Extent = 1.7 (1.4-2.4)" x 0.7 (0.4-0.9)", rotation angle = 82 (67-96) degrees
  Source aperture counts = 27.4 +/- 6.5
  Background aperture counts = 1.6
  Rate = 0.0007 +/- 0.0002

[Wed May  8 23:32:30 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 23:32:30 2013] Using photon index=1.80, rate=0.000705, arf fullrun_ccd6_acisf12315_pi14-548_pass1_cl_src4.arf
[Wed May  8 23:32:30 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  8 23:32:30 2013] Updating source flux to 8e-15
[Wed May  8 23:32:54 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May  8 23:32:55 2013] acisf12315/analysis//spectral/fullrun_ccd6_acisf12315_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete