[Wed May  8 19:25:21 2013] Detection parameters:
  Position = (768.0, 395.3) = 2 25 37.56 12 56 34.7
  Extent = 1.1" x 0.5", rotation angle = 105 degrees
  Source counts = 12.3 +/- 3.6
  Background counts = 0.7
  Rate = 0.0003 +/- 9e-05

[Wed May  8 19:25:21 2013] Off-axis axis estimate = 4.63'
[Wed May  8 20:45:24 2013] Using EEF radius (= 1.04 ")to estimate initial spatial extent for simple fitting
[Wed May  8 20:45:24 2013] Initial guess for spatial extent in simple fitting = 1.04"
[Wed May  8 20:45:24 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.102
[Wed May  8 20:45:24 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 1.04"
[Wed May  8 20:51:44 2013] fullrun_ccd6_acisf12315_pi14-548_cl_pass0_src3.ximg exists
[Wed May  8 20:51:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12315_pi14-548_cl_pass0_src3.csv
[Wed May  8 20:51:44 2013] fullrun_ccd6_acisf12315_pi14-548_cl_pass0_src3_1.ximg exists
[Wed May  8 20:51:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12315_pi14-548_cl_pass0_src3.csv
[Wed May  8 20:51:44 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12315_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12315_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 20:51:44 2013] fullrun_ccd6_acisf12315_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed May  8 20:51:44 2013] fullrun_ccd6_acisf12315_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May  8 20:51:44 2013] Fit fullrun_ccd6_acisf12315_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed May  8 21:23:17 2013] Spatial fit model total counts = 14.621600, observed total counts = 18.000000
[Wed May  8 21:23:17 2013] Offset between fit and detection position for source 1 = 1.001060 pixels
[Wed May  8 21:23:17 2013] 15.667900 total counts/ 3.444200 bgd. counts: snr = 6.586558
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.001060 pixels
  Position = (768.8, 394.6) = 2 25 37.55 12 56 34.1
  Extent = 1.5 (0.8-2.1)" x 0.4 (0.3-0.6)", rotation angle = 79 (69-97) degrees
  Source counts = 12.2 +/- 4.0
  Background counts = 3.4
  Rate = 0.0003 +/- 0.0001
[Wed May  8 21:23:17 2013] Vigneting correction estimate = 1.000000
[Wed May  8 21:23:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 21:23:17 2013] Assessing source extent using major axis lower bound
[Wed May  8 21:23:17 2013] Source does appear to be extended
[Wed May  8 21:23:17 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.30
[Wed May  8 22:30:31 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  8 22:30:31 2013] Initial guess for spatial extent in simple fitting = 0.94"
[Wed May  8 22:30:31 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.080
[Wed May  8 22:30:31 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 0.94"
[Wed May  8 22:36:17 2013] fullrun_ccd6_acisf12315_pi14-548_cl_pass1_src3.ximg exists
[Wed May  8 22:36:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12315_pi14-548_cl_pass1_src3.csv
[Wed May  8 22:36:17 2013] fullrun_ccd6_acisf12315_pi14-548_cl_pass1_src3_1.ximg exists
[Wed May  8 22:36:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12315_pi14-548_cl_pass1_src3.csv
[Wed May  8 22:36:17 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12315_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12315_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 22:36:17 2013] fullrun_ccd6_acisf12315_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed May  8 22:36:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12315_pi14-548_cl_pass1_tfrozen_src3.csv
[Wed May  8 22:36:17 2013] fullrun_ccd6_acisf12315_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May  8 22:36:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12315_pi14-548_cl_pass1_tfrozen_src3.csv
[Wed May  8 22:36:17 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12315_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12315_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 23:04:06 2013] Spatial fit model total counts = 9.645010, observed total counts = 18.000000
[Wed May  8 23:04:06 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  8 23:04:06 2013] Vigneting correction estimate = 1.000000
[Wed May  8 23:04:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 23:04:06 2013] Assessing source extent using major axis lower bound
[Wed May  8 23:04:06 2013] Source does appear to be extended
[Wed May  8 23:04:06 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.30
[Wed May  8 23:15:48 2013] Writing source region out to fullrun_ccd6_acisf12315_pi14-548_pass1_cl_src1_src.reg
[Wed May  8 23:15:48 2013] Extracting stamp from image fullrun_ccd6_acisf12315_pi14-548_cl_sm2.00.img.gz, (702, 328) - (835, 461)
[Wed May  8 23:15:48 2013] Writing fullrun_ccd6_acisf12315_pi14-548_pass1_cl_src1.gif
[Wed May  8 23:17:01 2013] Size of ../../acisf12315/products/events/fullrun_ccd6_acisf12315_pi14-548_pass1_cl_src1_src.evt.gz[events] = 14 counts
[Wed May  8 23:17:01 2013] Mean chipx,y = (704.86, 331.43)
[Wed May  8 23:17:01 2013] Mean tdetx,y = (3579.86, 2033.43)
[Wed May  8 23:17:01 2013] chipx,y range = (686.00-721.00, 313.00-343.00)
[Wed May  8 23:17:01 2013] Size of ../../acisf12315/products/events/fullrun_ccd6_acisf12315_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 28 counts
[Wed May  8 23:17:02 2013] Not generating rmf since there are only 12 counts
[Wed May  8 23:17:02 2013] arf not found, will run specextract
[Wed May  8 23:17:27 2013] ../../acisf12315/products/spectra/fullrun_ccd6_acisf12315_pi14-548_pass1_cl_src1.warf not found
[Wed May  8 23:17:27 2013] ../../acisf12315/products/spectra/fullrun_ccd6_acisf12315_pi14-548_pass1_cl_src1.wrmf not found
[Wed May  8 23:17:27 2013] Removal of ../../acisf12315/products/spectra/fullrun_ccd6_acisf12315_pi14-548_pass1_cl_src1.soff failed
[Wed May  8 23:21:21 2013] Spectrum 1 has only 12 counts, deleting rmf
[Wed May  8 23:21:21 2013] 195.316
[Wed May  8 23:32:29 2013] Updating aperture counts using extracted products
[Wed May  8 23:32:29 2013] Total counts from fullrun_ccd6_acisf12315_pi14-548_pass1_cl_src1_src.pi.gz = 14.00
[Wed May  8 23:32:29 2013] Total counts from fullrun_ccd6_acisf12315_pi14-548_pass1_cl_src1_bgd.pi.gz = 28.00
[Wed May  8 23:32:29 2013] Got source and background scale factors 0.000002, 0.000077
[Wed May  8 23:32:29 2013] User source parameters:
  Position = (768.8, 394.6) = 2 25 37.55 12 56 34.1
  Extent = 1.5 (0.8-2.1)" x 0.4 (0.3-0.6)", rotation angle = 79 (69-97) degrees
  Source aperture counts = 13.3 +/- 4.8
  Background aperture counts = 0.7
  Rate = 0.0003 +/- 0.0001

[Wed May  8 23:32:30 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 23:32:30 2013] Using photon index=1.80, rate=0.000311, arf fullrun_ccd6_acisf12315_pi14-548_pass1_cl_src1.arf
[Wed May  8 23:32:30 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  8 23:32:30 2013] Updating source flux to 3.4e-15
[Wed May  8 23:32:54 2013] Flag p found in src. 1 procflags, skipping spectral fitting
[Wed May  8 23:32:54 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May  8 23:32:55 2013] acisf12315/analysis//spectral/fullrun_ccd6_acisf12315_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete